1. How to Set Up a Projector and SmartBoard

2. Meet the projector

3. Step 1: Take notice of the vga cable and power adapter connections

4. Step 2: Plug in the power ac adapter
This will give the projector power. Connect one end to the projector and the other to the outlet

5. Step 3: Plug in vga cable
One end of the vga cable will be connected to the projector and the other connected to the computer

6. Make sure you plug in the vga cable to the correct output location
Step 3: Vga connected
Make sure you plug in the vga cable to the correct output location

7. Step 4: Connect the vga cable to the laptop
In most cases you will require a dangle in order to connect the vga cable to the laptop.

8. Connect the vga cable to the dangle

9. Step 5: Connect the dangle to the laptop

10. Step 6: Connect the SmartBoard to the computer
Remember to plug in the ac adapter to the outlet
Then plug in the usb side to the computer

11. Power up the projector, computer, turn the smart board on and…

12. Ready for the lesson