1. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 1 Bruce Mayer, PE Chabot College Engineering Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu Chabot Engineering Bruce Mayer, PE Summary Biography http://home.comcast.net/~bruce_mayer/site/ Google-Search: chabot mayer

2. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 2 Bruce Mayer, PE Chabot College Engineering EDUCATION  MS Electrical Engineering, Stanford University, 1991  MS Mechanical Engineering, Stanford University, 1983  BS Mechanical Engineering, University of CALifornia at Berkeley, 1978  AS Engineering, Cabrillo College, 1976 A Proud Community College Grad

3. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 3 Bruce Mayer, PE Chabot College Engineering PROFESSIONAL LICENSES  California State Registered Professional Engineer (Electrical), 2002  California State Registered Professional Engineer (Mechanical), 1982  California Community College Lifetime Instructor Credential (Engineering), 1984

4. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 4 Bruce Mayer, PE Chabot College Engineering PROFESSIONAL HISTORY  Olympus Integrated Technologies America: 2000 → 2003 Director, System Design & Integration Engineering  Silicon Valley Group (Watkins-Johnson Co.) 1979 → 2000 Director, System Design & Integration Engineering, 1999-2000 WJ-APNext ® Product Development Team Leader, 1997-1999

5. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 5 Bruce Mayer, PE Chabot College Engineering PROFESSIONAL HISTORY Senior Electrical/Process/Mechanical Design Engineer, 1994-1996 WJ-1000 ® Product Development Team Leader, 1991-1994 Flat Panel Deposition Equipment/Process Engineering Manager, 1985-1991 APCVD System Design Engineer, 1982-1985 Firing Furnace Design Engineer, 1979-1982

6. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 6 Bruce Mayer, PE Chabot College Engineering PROFESSIONAL AFFILIATIONS  Member Institute of Electrical and Electronics Engineers (IEEE) American Society of Mechanical Engineers (ASME)  Past Member –American Society of Heating, Refrigeration and Air-conditioning Engineers (ASHRAE) –Society for Information Display (SID) –Assoc. of Computing Machinery (ACM) –National Soc. Of Prof. Engineers (NSPE)

7. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 7 Bruce Mayer, PE Chabot College Engineering PATENTS  Patent No.s 6,846,149 (2005) 6,610,150 (2003 6,544,345 (2003) 5,122,391 (1992)

8. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 8 Bruce Mayer, PE Chabot College Engineering PUBLICATIONS  “Transient analysis of carrier gas saturation in liquid source vapor generators” Journal of Vacuum Science Tech. A, vol. 19, no.1 (2001)  “Thermal Modeling for APCVD Furnace Calibration Using MATRIXx”, Electrochemical Soc. Proc., vol. 97-9, (1997)  “Small Signal Analysis of Source Vapor Control Requirements for APCVD”, IEEE Trans. on Semiconductor Manufacturing, vol.9 no.3 (1996)

9. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 9 Bruce Mayer, PE Chabot College Engineering PATENTS AND PUBLICATIONS  "Highly Conductive and Transparent Films of Tin and Fluorine Doped Indium Oxide by Produced by APCVD", Thin Solid Films, vol. 221 (1992)  "In-Situ Measurements of Net Fireplace Efficiency Using Electric Co-Heating", Lawrence Berkeley Laboratory Report EEB-Env-79-2 (1979)

10. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 10 Bruce Mayer, PE Chabot College Engineering 1992 Paper  ~10 Reprint Reqs Estonia Sweden  Recent contacts Dow Chem in MI (jul03) Konica in Japan (jan04)

11. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 11 Bruce Mayer, PE Chabot College Engineering T/27Aug13 → Your Turn  Complete HomeWork-1: Answer these two Questions (Posted to WebPage) 1.WHY do you think that you might want to become an Engineer? 2.To which UNIVERSITY do you hope to TRANSFER to and WHY?  Next Tues Each student will have 2-3 minutes to state his/her name, and to Read/Summarize his/her answers to the above Questions

12. BMayer@ChabotCollege.edu ENGR-10_Instructor_Bio.ppt 12 Bruce Mayer, PE Chabot College Engineering Done for 1 st Meeting  Please see me if you would like to ADD Bending Moment