1. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O Borgatti, M. Lertora, F. Foret, B. Cali, L. STMicroelectronics, Agrate Brianza,Italy IEEE Journal of Solid-State Circuits, March 2003, Volume: 38, Issue: 3, pp.521-529 Presenter: Ching-Chi Hu

2. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 2/20 2015/5/1 Abstract  A system chip targeting image and voice processing and recognition application domains is implemented as a representative of the potential of using programmable logic in system design. It features an embedded reconfigurable processor built by joining a configurable and extensible processor core and an SRAM-based embedded field- programmable gate array (FPGA). Application- specific bus-mapped coprocessors and flexible input/output peripherals and interfaces can also be added and dynamically modified by reconfiguring the embedded FPGA.

3. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 3/20 2015/5/1 Abstract (Cont.)  The architecture of the system is discussed as well as the design flows for pre- and post- silicon design and customization. The silicon area required by the system is 20 mm 2 in a 0.18 μm CMOS technology. The embedded FPGA accounts for about 40% of the system area.

4. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 4/20 2015/5/1 Motive  The economics of system integration pushes logic suppliers toward ever more complex system-chip devices  Increasing design complexity and its associated risks, increase of non-recurrent engineering expenses, and shorter time-to- market and product life are causing manufacturers to look for faster turnaround and lower risk solutions for design and technology

5. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 5/20 2015/5/1 Embedded programmable logic in ASICs  On the logic design side, the ASIC introduces many design challenges because performance in terms of density, speed, and power consumption is significantly less aggressive than in cell-based design  the use of configurable logic must be limited to what really needs to be programmable for design efficient  the integration of programmable hardware in SOC introduces changes in the design flow.  Different implementations can also be repeated to produce different configurations for the same chip.

6. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 6/20 2015/5/1 Embedded programmable logic in ASICs (cont.)  the signoff of the system must be done for each configuration, since for every configuration the logic implemented in the e- FPGA must operate correctly and possible timing violations need to be avoided  an automated task to solve  the logic synthesis and optimization must be performed separately twice, for the hardwired logic and for the configuration logic, respectively.

7. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 7/20 2015/5/1 Embedded programmable logic in ASICs (cont.)

8. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 8/20 2015/5/1 System architecture  32 bit Extensible Microprocessor  Five-stage pipeline  8 KB direct-mapped data/instruction caches  16/24 bit instruction format  64 bit processor interface (PIF)  48 KB SRAM  Embedded FPGA  Extension of the processor datapath supporting a set of additional special-purpose instructions  Bus-mapped coprocessor  Flexible I/O

9. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 9/20 2015/5/1 System architecture (cont.)

10. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 10/20 2015/5/1 Microprocessor to FPGA interface  The design uses a single context embedded FPGA to extend the instruction set of a commercial microprocessor architecture which allows adding user-defined instructions  the number of user-defined instructions available at a given time is limited by the e-FPGA logic capacity and instruction logic complexity  the size of the set of additional instructions exceeds the logic capacity of the e-FPGA, it must be split  The flexibility advantage of this architecture implies a speed penalty for the part of logic mapped inside the e-FPGA

11. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 11/20 2015/5/1 Microprocessor to FPGA interface (cont.)

12. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 12/20 2015/5/1 Microprocessor to FPGA interface (cont.)  The synchronization mechanism for two different opcode types

13. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 13/20 2015/5/1 Block Description of the e-FPGA

14. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 14/20 2015/5/1 Application example  A face recognition system

15. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 15/20 2015/5/1 Application example (cont.)

16. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 16/20 2015/5/1 System to RTL design flow  soft hardware (reconfigurable logic) to be mapped on the e-FPGA  HDL RTL code of instruction extensions  bus-mapped coprocessors  special-purpose I/O peripherals  conventional fixed hardware (hardwired logic)  Microprocessor RTL code  AHB/APB bus  peripherals;  embedded software (C code)  application software  low-level drivers for the hardware platform

17. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 17/20 2015/5/1 System to RTL design flow (cont.)

18. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 18/20 2015/5/1 RTL to Layout design flow

19. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 19/20 2015/5/1 System implementation  Technology: 0.18μm CMOS 6-ML  SRAM: Main 48KB (64-bit wide)  Memory: I$:8KB D$:8KB (64-bit wide) Buffers: 4x256B (8-bit wide)  Chip size: 5.5x5.5 mm 2 (pad limited)  Core size: 20 mm 2  E-FPGA size: 8.2 mm 2 (15K useable equivalent ASIC gates)  Customizable I/O: 24 general- purpose input/output and 8 general- purpose bidirs  Power supply: 2.7-3.6V (external), 1.8V (core, internally generated/regulated)

20. A reconfigurable system featuring dynamically extensible embedded microprocessor, FPGA, and customizable I/O 20/20 2015/5/1 Conclusion  a novel system architecture based on a reconfigurable microprocessor has been presented and its implementation using embedded FPGA technology  The future work is investigated the impact of dynamic hardware configuration on energy efficiency of the computing system