1. 10 February 20041 Viewing Controller Status

2. 10 February 20042 Controller Status Provides a “snap shot” of the current configuration of controllers on the network –Either one selected controller or all controllers

3. 10 February 20043 Open the Controller Window Click the tool bar button OR Select the Setup > System pull-down menu option Then click on the Controller Status tab

4. 10 February 20044 Collecting Controller Status Displays controller status –Select one controller and click the button for that controller’s status –Click the button for the status of all controllers

5. 10 February 20045 Viewing Controller Status Use the scroll bars to step through all status information and all controllers

6. 10 February 20046 Door Name and Controller/Door Address Door name lists the text name assigned to each door Address lists the individual controller/door addresses

7. 10 February 20047 Online Status Identifies the controller’s online status – - Actively communicating with the network – - Powered off or disconnected from the network, or not requested by the operator

8. 10 February 20048 Controller Type Identifies the controller model and configuration –PXL-250 P/WPXL-500/510 P/WEntraguard –SB-293SB-593 –1 door or 2 door

9. 10 February 20049 ROM Revision / RAM Configuration Identifies the controller’s ROM firmware revision Identifies the controller’s RAM size –RAM size correlates to the number of users that can be assigned to the controller

10. 10 February 200410 Events / Users in Memory Lists the number of events currently stored in the controller (maximum of 3,640) Lists the number of users stored in the controller’s memory

11. 10 February 200411 Date and Time Lists the date and time the controller status information was collected

12. 10 February 200412 Cold and Warm Resets Lists the number of times the controller’s power has been cycled off and on Lists the number of times the controller’s microprocessor reset itself

13. 10 February 200413 POST Failures Lists the number of times the controller’s power on self test failed –Indicative of a RAM or controller power issue

14. 10 February 200414 Local APB Identifies if local anti-passback has been enabled for that controller

15. 10 February 200415 Access Enabled Identifies if the controller’s reader is currently turned on (enabling access control reading) or off (disabling access control reading)

16. 10 February 200416 Reader Type Lists the type of reader connected to the controller –Proximity or Wiegand

17. 10 February 200417 Door Status and Door Lock Lists the state of the door status switch on the door at the time controller status was read Lists the status of the door lock at the time controller status was read

18. 10 February 200418 Door Open Time / Unlock Time Lists the number of seconds a door can be held open before a “door held open” alarm is generated Lists the number of seconds that a door’s lock relay will be active following a valid access request

19. 10 February 200419 Door Unlock Timezone Lists the unlock timezone that has been assigned to the door

20. 10 February 200420 First Person In Lists the First Person In value assigned to that door

21. 10 February 200421 Door Forced / Door Held Outputs Lists the output where a door forced alarm will be directed Lists the output where a door held open alarm will be directed

22. 10 February 200422 Primary and Auxiliary RTE Lists the action taken by the controller when a Primary or Auxiliary RTE signal is received