1. Tools English for Careers Class

2. tool belt A tool belt is used to hold tools on your body.

3. safety glasses Safety glasses are used to protect your eyes from injury.

4. claw hammer A claw hammer is used to pound in and pull out nails.

5. tape measure A tape measure is used to measure length or width.

6. chalk line A chalk line is used to mark long straight lines on flat surfaces.

7. carpenter’s pencil A carpenter’s pencil is used to mark measurements.

8. level A level is used to check that horizontal and vertical things are straight.

9. nail gun A nail gun is used to put nails into wood.

10. utility knife A utility knife is used to cut thin materials.

11. wrecking bar A wrecking bar is used to force apart two objects.

12. multi-tip screwdriver A multi-tip screwdriver is used to screw in and screw out different kinds of screws.

13. circular saw A circular saw is used to cut wood.

14. sledge hammer A sledge hammer is used to break dry wall or masonry.

15. adjustable wrench An adjustable wrench is used to tighten or loosen nuts or bolts.

16. cordless drill A cordless drill is used to drill holes in wood.

17. table saw A table saw is used to cut wood or other material.

18. nail set A nail set is used to fasten materials together.

19. plumb bob A plumb bob is used to be sure vertical things are straight.

20. C-clamp A C-clamp is used to hold wood or metal pieces in place.

21. miter box A miter box is used to guide a handsaw to make correct cuts.

22. The End