Download presentation
Presentation is loading. Please wait.
Published byBailey Hoggatt Modified over 10 years ago
1
Automated Bridge Scour Inspection FSU/FAMU College of Engineering Team 7 Needs Assessment and Project Scope 09/29/2010
2
Members: Ryan Szoke EE (Project Manager) – Power, sensors Drew Doan CPE (Recorder) – Microprocessors, image processing Dezmond Moore CPE (Treasurer) – Data collection, programming Griffin Francis ME – Controls, odometry, locomotion Matthew Kent ME – Platform design, motors
3
What is Bridge Scour? - Erosion of material at splash zone - Costly phenomenon - Inadequate inspection methods
4
Simulated Scour Zone
5
- Develop and Design an autonomous robotic system to inspect bridge foundations using SONAR technology to monitor scour conditions Our Goal
6
Our Objective - Develop autonomous platform - Provide adequate inspection data - Long-term monitoring
7
3D SONAR Image Naismith Marine Services
8
High priority of required capabilities - Movement with respect to bridge substructure - Use sonar to inspect/record scour-3D-image - Autonomous operation
9
Lower Priority of Required Capabilities - System easily portable - Deployed by few technicians
10
Higher Priority of Desired Capabilities - Capture video during inspection - Lighting for visibility for camera video - Safety line
11
Lower Priority of Desired Capabilities - Easy maintenance - Easy operation by a trained technician - Withstand rough currents/debris - Can be deployed on various bridge substructures - Attractive robot design
12
User Operation - Device is deployed at surface - Installation via existing guide-rail - System is started - Autonomous scan of scour zone
13
User Operation - Possible video inspection - Device returns to surface for extraction - Device is attached to interface for analysis - Contour map obtained from data
14
Functional Requirements - Utilize SONAR sensors for mapping - Adequate memory storage - Observes scour in coarse/medium sand - Operates in waterways with depths up to 30 ft - Withstand flow velocities of 3.5 m/s - SONAR resolution of approximately 1.0 ft
15
Non-Functional Requirements - Sufficient battery life for run sequence - Allows testing of multiple SONAR sensors - Utilize LabVIEW, C-programming, or similar
16
Constraints - Utilization of existing substructure - Waterproof - Robust to environment - Adequately sized and constrained for inspection - Cost less than $3,000
17
General Test Plan - Device deployed by team - Simulate bridge substructure - Simulate scour conditions - Autonomous scan of scour region - Removal of device - Use interface for mapping - Compare mapping with simulated condition
18
Testing Outcomes * Device deployed by team - System is easily portable - Attachment to substructure - Deployable by a few technicians - Low maintenance design
19
Testing Outcomes * Simulate bridge substructure - Move with respect to substructure - Deployable on various substructures - Operates in waterways with depths up to 30 ft
20
Testing Outcomes * Simulate scour conditions - Utilize SONAR sensors for mapping - Adequate memory storage - Observes scour in coarse/medium sand
21
Testing Outcomes * Autonomous scan of scour region - Provide data for 3D contour map - Capture video during inspection - Lighted scan region
22
Testing Outcomes * Removal of device - Tethered via safety line - Allows testing of multiple SONAR sensors
23
Testing Outcomes * Use interface for mapping - Easily operated by single technician - Utilize LabVIEW, C-programming, or similar
24
Testing Outcomes * Compare mapping with simulated condition - Provide data for 3D contour map - Long-term monitoring
25
Final Thoughts
26
References National Cooperative Highway Research Program (NCHRP) Synthesis 396: Monitoring Scour Critical Bridges US Geological Survey
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.