1. December 2011

2. SATEC 25 years of Innovation in measurement & management of Energy and Power Quality

3. Multi-Tenant Submetering Power Measurement Energy Efficiency & Cost Allocation Energy Management & Billing Asset Management RS232/422/485, Profibus, TCP/IP, Dialup modem, GPRS, RF, USB Modbus RTU, ASCII, DNP3.0, Modbus/TCP, DNP3/TCP, IEC 61850, 60870 LAN eXpertpower™ Server (Pro Edition) Internet eXpertpower™ Server (SaaS) Substation Automation Power Quality Analysis Fault Recording Revenue Metering Smart Grid & Demand Response

6. Generation Plant Energy Management Empowering the Smart Grid Cost Effective Substation Automation and Fault Recording Revenue Metering with Power Quality Analysis Demand Side Management Remote Control for Customer Generators Pole-Top Power Quality Analysis Central Web-based Control and Management Application IEC 60870 Transducer Fault Protection

7. Typical Energy Management Printed Utility Bills Printed Utility Bills ETC2002 Automatic Bill Data Retrieval eXpertpower Server eXpertpower Server Internet TCP/IP Modbus GPRS SATEC Meter/s Utility Vault Air-conditioning Meter/s Digital Pulse RF SATEC System Operator Tenants TOU Bills Tenants TOU Bills Phone & Email service End User / Facility Manager / Owner Accounting Software Water/Gas Meter/s Concentrator ETC2002 Site Internet Gateway Cellular Provider Gateway Optional converter M-bus

8.  Multifunctional 3-Phase Smart Meter –More than 120 monitored parameters –16*2 character LCD display  Revenue Energy Meter –Class 0.5S precision  Programmable Logical Controller -16 control set points, thresholds and delays  Event and Data Recording –Over 90 days history storage  Built-in RS-485 Port  Selection of expansion modules –RS-485, RS-232, Ethernet, Profibus, RF, GPRS, –Digital Inputs, Digital Outputs, Analog Outputs  1A, 5A, 100A or Remote CTs (up to 1200A)  Replacement for analog transducer EM132 DIN Rail Mounted Multi Function Transducer

9.  Multifunctional 3-Phase Smart Meter –More than 120 monitored parameters –16×2 character LCD display  Billing/TOU Revenue Energy Meter –Class 0.5S precision  Harmonic Analyzer –THD, TDD, up to 40 th harmonics (incl. angles)  Real-time Waveform Capture –128 samples/cycle  Programmable Logical Controller -16 control set points, thresholds and delays -Standard 2DI/1DO, Optional 4DI/2DO (total 6DI/3DO) or 4 AO  Event and Data Recording –Over 90 days history storage  Real Time Clock –Backup for 60 days  Built-in RS-485 and IR Ports  Second optional communication: RS-485, RS-232, Ethernet, Profibus, RF, GPRS  1A, 5A, 100A or Remote CTs (up to 1200A) EM133 DIN Rail Mounted Energy Meter

10.  Multifunctional 3-Phase Smart Meter  3-Phase-at-once bright LED display  Percent of load circular bar graph  Billing/TOU Revenue Energy Meter (E/EH Models)  Class 0.5S precision, TOU Tariffs  Harmonic Analyzer, up to 40th harmony (EH Model)  Real-time 128 samples/cycle Waveform Capture (EH Model)  16 Programmable set points, thresholds and delays  Event and Data Recording for over 90 days  Real Time Clock (battery backup option)  Built-in RS-485 Port, optional RS-232, Ethernet, Profibus, RF and GPRS  Optional 4DI/2DO and 4AO modules PM130 PLUS Panel Mounted Multi Function Meter

11.  Multi-tenant power and energy meter  Up to 12 three phase or 36 single phase loads (or any combination)  2×16 character LCD display  Time Of Use (TOU) BFM136 Branch Feeder Monitor  8MB Data logging  Remote CTs – up to 200 meters from device  Class 0.5S including the CTs (Solid Core, ANSI C12.16 & IEC62053-21)  Available communication: RS485, RS232, Ethernet, GPRS, Dialup modem, RF

12. C192PF Power Factor Manager  Control of up to 8 capacitor groups  3-phase measurement of V, A, P, Q and Energy  Manual, self-adapting automatic and optimizing automatic operation  Full four-quadrant operation  Two Power Factor setpoint ranges selectable via DI (day/night, utility/generator etc.)  True and displacement power factor setups  Cosϕ monitoring & control  kVAR monitoring & control  Extensive capacitor banks protection via programmable alarm  Setpoints (no-volt, over-voltage and high harmonics override conditions)

13. PM172 Advanced Power & Revenue Meter Adds to the PM130 functionality:  Class 0.2S  1MB memory  On board 2DI/2DO  Built in 2 communication ports  Multi level setpoints  RTC battery backup  Total harmonic powers (EH model)  Available also in transducer version

14. PM296 Power Quality Analyzer  11 window simultaneous display  Long term memory  2 independent communication ports  6 programmable control relays  12 digital inputs  2 analog outputs

15. PM175 - Power Quality Analyzer  Advanced Power Quality Analysis –Monitoring, statistics & reports according to EN50160 specifications and/or programmable –6 channel waveform recording –Harmonics & inter-harmonics according to IEC 61000-4-7 –Directional power harmonics –Flicker according to IEC 61000-4-15  Event/Data Log –Power quality event/data logging with time stamps –Logging capability for more than 100 parameters –Waveform recording capability up to 8 cycles of pre-fault, and up to 16 post-fault  Alarm & Control –16 programmable set points –Built in 2DI/2DO, optional 2DI/2DO (total 4DI/4DO)  Communication –2 independent communication ports (RS232, RS422, RS485, modem, Ethernet, Profibus DP)

16. Pole-Top Power Quality Analysis Power Quality Analyzers with Cellular modem and unique sensors that are connected without power down help manage:  Line losses  Capacitor controls  Voltage regulation  Outage detection  Load balance  Harmonics  Fault location  Power theft PQA Application

17. Revenue Metering with Power Quality Analysis The utility’s agent at the consumer facility brings valuable information into the smart grid:  High performance revenue meter –High accuracy multi tariff meter (Class 0.2S – 0.1%) –Long term on board memory –Standard sealed enclosure (DIN 43857 EM720 / Socket Meter EM920) –Anti-tampering, tilt and movement sensors  Cutting Edge Power Quality Analyzer –EN50160 compliance monitoring –Waveforms logging –Hot-swap communication modules  Fast Transient and Fault Recorder –Detects and log transient from 20 micro seconds

18. FPD280 Fault Protection  4 current and 4 voltage inputs  Detects phase and ground faults  16 programmable 8 point Time Over Current (TOC) curves  Power and Energy measurements  Local and remote configuration  RS-485 Modbus communication  DIN rail or wall mount

19. Substation Automation and Fault Recording 6-in-1 solution for cost-effective substation automation:  Revenue Metering –High accuracy TOU meter  Power Quality –EN50160 and custom events  Distributed Fault Recorder –Up to 1024 samples/cycle  Sequence of Events (SoE) –128 1ms resolution inputs  Backup Protection Equipment –Virtual circuit breaker algorithms  Devices Control –Programmable relay outputs

20. ETC2002 Intelligent Network Communication Device  One or Two RS-422/RS-485 master ports  One RS-232 slave ports  Ethernet 10Base-T port  Optional Dial-Up modem and wireless RF  Data concentrator for up to 250 devices  Event log for recording status change events and device diagnostics  1.5 MB non-volatile memory with battery backup  Real Time Clock  IRIG-B time-code input  Four DIs

21. RGM 180 Remote Graphic Monitor  Local or remote touch screen color LCD  Simultaneous operation of unlimited number of SATEC devices  RS-485, TCP/IP, USB and IR ports  Thorough communication converter

22. PAS Power Analysis Software  Automatic power quality reports for EN50160 & IEEE 1159  Automatic polling of devices  Simple off-line instrument setup  Direct data access for status monitoring or analysis  Communication: RS standard serial lines, TCP/IP, USB, Telephone/Modem  Comprehensive analysis  Self-test  Easy export to spreadsheet, Word, Excel or database  Extensive graphic and report capabilities for waveforms, harmonics & billing  Export COMTRADE (IEEE standard common format for transient data exchange)

23.  Easy to use, no installation, energy management tool  Complete data flow admin:  Collecting from meters  Analyzing, including virtual meters  Various displays  Manual/automatic decisions for load control  Alarms and Events  Messages, Emails, SMS  Historical information  MS-SQL database  Billing and invoicing  Full bill customization eXpertpower ™ Web-based energy management

24.  Dashboard: –Single line diagrams –Interactive graphs –Customized tables  Readings: –Last Readings –History –Max Demands –Data logs  Events View  Energy: –Total –Import –Export  Report Wizard  Data Entry: –Import –Energy Diary  Billing (option )

25. Fully customized administration tools  Maintenance: –Customers –Sites –ETCs –Devices  Permissions: –Roles –Users  Events Definition  License Management  System Settings

26. Various Navigation Options

27. EN50160 Summary Report

28. High individual harmonics

29. TDD at 22kV

30. ITI (CBEMA) Curve

31. Deep Analysis of a Dip

32. SATEC Empowering the Smart Grid www.satec-global.com

33. SATEC Profibus Modules  Profibus Slave DP – V0  9.6kbs - 12Mbs automatic baud rate detection  32 bytes input and 32 bytes output buffers  Messaging mechanism to allow for exchange of data exceeding the 32 byte I/O buffers  Data available in 16-bit or 32-bit format  Manual Node Addressing support as well as from Remote Profibus Master configuration tool Anybus module Includes GSD & text files Case Study: Kimberly Clark Integrated with Siemens PLC & SCADA Complete function block for SIMATIC Software