1. Digital Installation - 1 Modern Communication & Broadcast System (MCBS) - 60cms Prepared By Checked ByApproved ByCirculated By Mr. Ashok Dubey Mr. Sanjib MunshiMr. Mukul BawejaMs. Jyoti Shembi Bulletin No: AS/07/10/DAKC/0021

2. Digital Installation - 1 Modern Communication & Broadcast System (MCBS) - 60cms

3.  By the End of this session you will be able to:  Identify the components of dish Antenna.  Explain functions of each components.  Assemble the components of dish Antenna.  Install the complete dish antenna. Objective

4. Component Identification

5. Components  Reflector  Antenna Bracket  Elevation Bracket  LNBF arm with cap  LNBF Clamp  Mast  Struts-2  Foot mount  Nuts, Bolts & Screws

6.  Reflector intercepts the incoming signal from the satellite and reflects to a common point called focal point. Reflector Reflector’s Rear view Rim Reflector’s Front view

7. Function of Reflector LNBF Reflector

8.  It helps in fixing Reflector to LNBF Arm and Elevation Bracket. It is fixed on the rear side of Reflector. Antenna Bracket Direction to hold the Bracket Up ward Direction

9.  Side view of the Antenna Bracket Antenna Bracket

10.  Elevation bracket is for elevation & azimuth angle setting and to fix Antenna bracket & Mast. Elevation Bracket Bolt fixed here acts as Stopper Side View

11. Mast, Mount Clamp, Struts & Foot Mount Mast Struts Foot Mount

12. LNBF Arm & LNBF Clamp LNBF Clamp LNBF Arm LNBF Cap

13. Screws,Bolts & Nuts  Screws, nuts and bolts are used to fix two or more parts. Antenna Bracket & Elevation Bracket Bolts & nuts with Marker washers LNBF Arm & Antenna Bracket, LNBF Arm & LNBF Clamp Nuts & Bolts Antenna Bracket and reflector Nuts & posipan screws LNBF Clamp Screws & Nuts Foot Mount, Mast and Struts Nuts & Bolts

14. Dish Assembling Process

15.  Fix the LNBF Arm to Antenna Bracket as shown. Check the arrow marking on the antenna bracket Installation of Dish Antenna Arrow mark

16.  Complete assembly will be as below. The bolts to be inserted from the top of LNBF Arm & the nuts to be fixed at the back side of the Antenna Bracket as shown in the picture Installation of Dish Antenna Bolt from top

17. Installation of Dish Antenna  Fix the Antenna Bracket & Elevation bracket as below. The Elevation Bracket will be placed inside the Antenna bracket & accordingly the bolts & nuts will be fixed as shown in the pictures.

18. Installation of Dish Antenna  Complete Antenna Bracket, LNBF Arm & Elevation Bracket assembly.

19. Installation of Dish Antenna  Fix the complete bracket assembly to the Reflector. Note: Always fix the Posipan screws & nuts diagonally

20. Installation of Dish Antenna  Fix the LNBF Clamp to the LNBF Arm.

21. Universal Mount Assembling Process

22. MAST SHOULD BE ALWAYS IN 90 DEGREES wrt GROUND (HORIZONTAL) Installation of Dish Antenna  Fix the Mast to the Foot mount along with two Struts.

23. Installation of Dish Antenna  The complete assembly is as below. This is floor mount option.  Always prefer Wall mount for installations. Fix the LNBF to the LNBF Clamp Stoppers Side View Stoppers Front View

24. End of module