1. 8/30/12 2013 Ford Police Interceptor Utility

2. 2013 Ford Police Interceptor Utility does not come with fog lights Front facia is made from solid plastic Round area in facia needs to be cut out for fog light to mount Bracketry on the back side of front facia to support fog lights needs to be purchased from Ford

3. The following parts need to be purchased from your local Ford dealer: (1) Driver Side Bracket – (BB5Z-15266-A) (1) Passenger Side Bracket – (BB5Z-15266-B) (6) Bracket Mounting Screws – (W706805-S902) (6) Mounting Nuts – (W715051-S439) (8) Light Mounting Screws – (N807011-S424)

5. Fog Light – (PAR28) Explorer/Utility Bracket - (P28FX11) PARTS

6. Using a 3.5” Hole Saw, Cut Out Fog Light Hole in Facia STEP 1

7. BeforeAfter Remove Plastic Tabs from Ford Mounting Brackets (BB5Z-A & BB5Z-15266-B) STEP 2

8. Install Mounting Nuts into facia (W715051-S439) STEP 3

9. Mount PAR-28 Lighthead and P28FX11 together per Installation Guide STEP 4

10. Install PAR-28 and Bracket Assembly into Ford Mounting Bracket using the Light Mounting Screws (N807011-S424) STEP 5

11. Install Complete Assembly into facia using the Bracket Mounting Screws (W706805-5902) STEP 6