1. Maps and Aerial Photos There are many different kinds of maps Geopolitical Topographic Shaded Relief, Photorectified or Standard Geologic Ecosystemic Meteorological Climatological And many other types. New map types are facilitated by use of powerful GIS (Geographic Information Systems) software. Maps and Aerial Photos There are many different kinds of maps Geopolitical Topographic Shaded Relief, Photorectified or Standard Geologic Ecosystemic Meteorological Climatological And many other types. New map types are facilitated by use of powerful GIS (Geographic Information Systems) software.

2. Maps and photos All maps have common elements Scale distance on the map equal to distance in the real world Legend What the symbols on the map represent Coordinate system Latitude Longitude; Township & Range; UTM Orientation info Which way is north south east and west Maps and photos All maps have common elements Scale distance on the map equal to distance in the real world Legend What the symbols on the map represent Coordinate system Latitude Longitude; Township & Range; UTM Orientation info Which way is north south east and west

3. Scales Verbal- words used to convey map distance / real world distance equivalencies e.g., one inch equals four thousand feet Graphic- usually a bar or line with calibration marks that indicate map distance real / world distance equivalencies Fractional - the numeric UNITLESS ratio of map distance to real world distance equivalencies Scales Verbal- words used to convey map distance / real world distance equivalencies e.g., one inch equals four thousand feet Graphic- usually a bar or line with calibration marks that indicate map distance real / world distance equivalencies Fractional - the numeric UNITLESS ratio of map distance to real world distance equivalencies 1:40,000 Note- NO UNITS until you assign them

4. Legend- a window that shows all the symbols used on the map. It commonly also includes scale, title, and orientation information

5. Coordinate Systems Latitude / Longitude- based on 360° circle coordinate system with Equator and Prime meridian as the respective index lines Commonly given as decimal degrees (38.6466° N, 98.3456° W), degrees with decimal minutes (38° 36.32’ N, 98° 18.2’ W) or degrees minutes and seconds (38° 36’ 18” N, 98° 18’ 12” W) Coordinate Systems Latitude / Longitude- based on 360° circle coordinate system with Equator and Prime meridian as the respective index lines Commonly given as decimal degrees (38.6466° N, 98.3456° W), degrees with decimal minutes (38° 36.32’ N, 98° 18.2’ W) or degrees minutes and seconds (38° 36’ 18” N, 98° 18’ 12” W) North South Prime meridian Equator

6. Coordinate systems UTM- a coordinate system based on a 1000 meter grid with the center of of each zone as the alignment point of the grid cells UTM coordinates might read 16 S 0455680 E 4268326 N

7. Coordinate systems Township Range a coordinate system based on a numeric grid

8. Common Maps used in the geosciences Topographic maps Contour lines represent vertical elevation with reference to sea level (zero elevation) they are isometric lines of what ever they are representing, in our case elevation Contour intervals are 5, 10, 20, 50 or 100 foot intervals Index contours are labeled and thicker Contour lines never cross or touch They “V” when they cross a stream channel, with the point of the “V” in the upstream direction They can create closed shapes on the map can represent either a hill or a depression Frequently used to make topographic profiles Common Maps used in the geosciences Topographic maps Contour lines represent vertical elevation with reference to sea level (zero elevation) they are isometric lines of what ever they are representing, in our case elevation Contour intervals are 5, 10, 20, 50 or 100 foot intervals Index contours are labeled and thicker Contour lines never cross or touch They “V” when they cross a stream channel, with the point of the “V” in the upstream direction They can create closed shapes on the map can represent either a hill or a depression Frequently used to make topographic profiles

9. Aerial Photos Frequently need to know the fractional scale on stereo photos Must compare photo area to map of the same area with known scale to determine the scale of the photograph Photo distance (mm) = Real distance as determined from map (Km) Then convert the above numbers to a unitless ratio Photo distance (mm) / Real world distance (mm) Aerial Photos Frequently need to know the fractional scale on stereo photos Must compare photo area to map of the same area with known scale to determine the scale of the photograph Photo distance (mm) = Real distance as determined from map (Km) Then convert the above numbers to a unitless ratio Photo distance (mm) / Real world distance (mm)

10. Geological maps Usually indicated by numerous colors used to identify various geological units systems groups formations members Contacts are indicated by lines with varying degrees of certainty by solid or dashed lines Also indicate location of geological structures faults folds intrusions dikes and sills Geological maps Usually indicated by numerous colors used to identify various geological units systems groups formations members Contacts are indicated by lines with varying degrees of certainty by solid or dashed lines Also indicate location of geological structures faults folds intrusions dikes and sills

14. 0° 90°270° 180° 0°N 90° W 90° E 0°S

15. Overlaying vector based maps to create derivative maps Color is attribute as is alphabetic designation

16. Layers of geographic information, which in turn can create new layers of data

18. Soils layer

19. Land Use Layer

20. Topographic layer

21. Watershed boundaries layers

22. Tiger file layer

23. Point specific layers Weather stations Point source pollution

24. GIS