1. Week 12 - Monday

2.  What did we talk about last time?  Trees  Graphing functions

4.  Two vegetarians and two cannibals are on one bank of a river  They have a boat that can hold at most two people  Come up with a sequence of boat loads that will convey all four people safely to the other side of the river  The cannibals on any given bank cannot outnumber the vegetarians…. or else!

5. Which we somehow seemed to skip earlier…

6.  Consider the following graph that shows all the routes an airline has between cities Minneapolis Milwaukee Chicago St. Louis Detroit Cincinnati Louisville Nashville

7.  What if we want to remove routes (to save money)?  How can we keep all cities connected? Minneapolis Milwaukee Chicago St. Louis Detroit Cincinnati Louisville Nashville

8.  Does this tree have the smallest number of routes?  Why? Minneapolis Milwaukee Chicago St. Louis Detroit Cincinnati Louisville Nashville

9.  A spanning tree for a graph G is a subgraph of G that contains every vertex of G and is a tree  Some properties:  Every connected graph has a spanning tree ▪ Why?  Any two spanning trees for a graph have the same number of edges ▪ Why?

10.  In computer science, we often talk about weighted graphs when tackling practical applications  A weighted graph is a graph for which each edge has a real number weight  The sum of the weights of all the edges is the total weight of the graph  Notation: If e is an edge in graph G, then w(e) is the weight of e and w(G) is the total weight of G  A minimum spanning tree (MST) is a spanning tree of lowest possible total weight

11.  Here is the graph from before, with labeled weights Minneapolis Milwaukee Chicago St. Louis Detroit Cincinnati Louisville Nashville 355 695 262 74 348 269 242 151 230 306 83

12.  Kruskal's algorithm gives an easy to follow technique for finding an MST on a weighted, connected graph  Informally, go through the edges, adding the smallest one, unless it forms a circuit  Algorithm:  Input: Graph G with n vertices  Create a subgraph T with all the vertices of G (but no edges)  Let E be the set of all edges in G  Set m = 0  While m < n – 1 ▪ Find an edge e in E of least weight ▪ Delete e from E ▪ If adding e to T doesn't make a circuit ▪ Add e to T ▪ Set m = m + 1  Output: T

13.  Run Kruskal's algorithm on the city graph: Minneapolis Milwaukee Chicago St. Louis Detroit Cincinnati Louisville Nashville 355 695 262 74 348 269 242 151 230 306 83

14.  Output: Minneapolis Milwaukee Chicago St. Louis Detroit Cincinnati Louisville Nashville 355 262 74 242 151 230 83

15.  Prim's algorithm gives another way to find an MST  Informally, start at a vertex and add the next closest node not already in the MST  Algorithm:  Input: Graph G with n vertices  Let subgraph T contain a single vertex v from G  Let V be the set of all vertices in G except for v  For i from 1 to n – 1 ▪ Find an edge e in G such that: ▪ e connects T to one of the vertices in V ▪ e has the lowest weight of all such edges ▪ Let w be the endpoint of e in V ▪ Add e and w to T ▪ Delete w from V  Output: T

16.  Apply Kruskal's algorithm to the graph below  Now, apply Prim's algorithm to the graph below  Is there any other MST we could make? 2 3 3 411 1

18.  Recall the definition of the floor of x:   x  = the largest integer that is less than or equal to x  Graph f(x) =  x   Defining functions on integers instead of real values affects their graphs a great deal  Graph p 1 (x) = x, x  R  Graph f(n) = n, n  N

19.  There is a strong visual (and of course mathematical) correlation a function that is the multiple of another function  Examples:  g(x) = x + 2  2g(x) = 2x + 4  Given f graphed below, sketch 2f -6 -5 -4 -3 -2 -1 1 2 3 4 5 6 2121 -2

20.  Consider the absolute value function  f(x) = |x|  Left of the origin it is constantly decreasing  Right of the origin it is constantly increasing -6 -5 -4 -3 -2 -11 2 3 4 5 6 2121 -2

21.  We say that f is decreasing on the set S iff for all real numbers x 1 and x 2 in S, if x 1 f(x 2 )  We say that f is increasing on the set S iff for all real numbers x 1 and x 2 in S, if x 1 < x 2, then f(x 1 ) < f(x 2 )  We say that f is an increasing (or decreasing) function iff f is increasing (or decreasing) on its entire domain  Clearly, a positive multiple of an increasing function is increasing  Virtually all running time functions are increasing functions

22. Student Lecture

24.  Mathematicians worry about the growth of various functions  They usually express such things in terms of limits, maybe with derivatives  We are focused primarily on functions that bound running time spent and memory consumed  We just need a rough guide  We want to know the order of the growth

25.  Let f and g be real-valued functions defined on the same set of nonnegative real numbers  f is of order at least g, written f(x) is  (g(x)), iff there is a positive A  R and a nonnegative a  R such that  A|g(x)| ≤ |f(x)| for all x > a  f is of order at most g, written f(x) is O(g(x)), iff there is a positive B  R and a nonnegative b  R such that  |f(x)| ≤ B|g(x)| for all x > b  f is of order g, written f(x) is  (g(x)), iff there are positive A, B  R and a nonnegative k  R such that  A|g(x)| ≤ |f(x)| ≤ B|g(x)| for all x > k

26.  Express the following statements using appropriate notation:  10|x 6 | ≤ |17x 6 – 45x 3 + 2x + 8| ≤ 30|x 6 |, for x > 2    Justify the following:  is  (  x)

27.  Let f and g be real-valued functions defined on the same set of nonnegative real numbers 1. f(x) is  (g(x)) and f(x) is O(g(x)) iff f(x) is  (g(x)) 2. f(x) is  (g(x)) iff g(x) is O(f(x)) 3. f(x) is  (f(x)), f(x) is O(f(x)), and f(x) is  (f(x)) 4. If f(x) is O(g(x)) and g(x) is O(h(x)) then f(x) is O(h(x)) 5. If f(x) is O(g(x)) and c is a positive real, then c  f(x) is O(g(x)) 6. If f(x) is O(h(x)) and g(x) is O(k(x)) then f(x) + g(x) is O(G(x)) where G(x) = max(|h(x)|,|k(x)|) for all x 7. If f(x) is O(h(x)) and g(x) is O(k(x)) then f(x)g(x) is O(h(x)k(x))

28.  If 1 < x, then  x < x 2  x 2 < x 3 ……  So, for r, s  R, where r 1,  x r < x s  By extension, x r is O(x s )

29.  Prove a  bound for g(x) = (1/4)(x – 1)(x + 1) for x  R  Prove that x 2 is not O(x)  Hint: Proof by contradiction

30.  Let f(x) be a polynomial with degree n  f(x) = a n x n + a n-1 x n-1 + a n-2 x n-2 … + a 1 x + a 0  By extension from the previous results, if a n is a positive real, then  f(x) is O(x s ) for all integers s  n  f(x) is  (x r ) for all integers r ≤ n  f(x) is  (x n )  Furthermore, let g(x) be a polynomial with degree m  g(x) = b m x m + b m-1 x m-1 + b m-2 x m-2 … + b 1 x + b 0  If a n and b m are positive reals, then  f(x)/g(x) is O(x c ) for real numbers c > n - m  f(x)/g(x) is not O(x c ) for all integers c > n - m  f(x)/g(x) is  (x n - m )

32.  We can easily extend our  -, O-, and  - notations to analyzing the running time of algorithms  Imagine that an algorithm A is composed of some number of elementary operations (usually arithmetic, storing variables, etc.)  We can imagine that the running time is tied purely to the number of operations  This is, of course, a lie  Not all operations take the same amount of time  Even the same operation takes different amounts of time depending on caching, disk access, etc.

33.  First, assume that the number of operations performed by A on input size n is dependent only on n, not the values of the data  If f(n) is  (g(n)), we say that A is  (g(n)) or that A is of order g(n)  If the number of operations depends not only on n but also on the values of the data  Let b(n) be the minimum number of operations where b(n) is  (g(n)), then we say that in the best case, A is  (g(n)) or that A has a best case order of g(n)  Let w(n) be the maximum number of operations where w(n) is  (g(n)), then we say that in the worst case, A is  (g(n)) or that A has a worst case order of g(n)

34. Approximate Time for f(n) Operations Assuming One Operation Per Nanosecond f(n)f(n)n = 10n = 1,000n = 100,000n = 10,000,000 log 2 n3.3 x 10 -9 s10 -8 s1.7 x 10 -8 s2.3 x 10 -8 s n10 -8 s10 -6 s0.0001 s0.01 s n log 2 n3.3 x 10 -8 s10 -5 s0.0017 s0.23 s n2n2 10 -7 s0.001 s10 s27.8 hours n3n3 10 -6 s1 s11.6 days31,668 years 2n2n 10 -6 s3.4 x 10 284 years3.1 x 10 30086 years2.9 x 10 3010283 years

35.  With a single for (or other) loop, we simply count the number of operations that must be performed: int p = 0; int x = 2; for( int i = 2; i <= n; i++ ) p = (p + i)*x;  Counting multiplies and adds, (n – 1) iterations times 2 operations = 2n – 2  As a polynomial, 2n – 2 is  (n)

36.  When loops do not depend on each other, we can simply multiply their iterations (and asymptotic bounds) int p = 0; for( int i = 2; i <= n; i++ ) for( int j = 3; j <= n; j++ ) p++;  Clearly (n – 1)(n -2) is  (n 2 )

37.  When loops depend on each other, we have to do more analysis int s = 0; for( int i = 1; i <= n; i++ ) for( int j = 1; j <= i; j++ ) s = s + j*(i – j + 1);  What's the running time here?  Arithmetic sequence saves the day (for the millionth time)

38.  When loops depend on floor, what happens to the running time? int a = 0; for( int i = n/2; i <= n; i++ ) a = n - i;  Floor is used implicitly here, because we are using integer division  What's the running time? Hint: Consider n as odd or as even separately

39.  Consider a basic sequential search algorithm: int search( int[] array, int n, int value) { for( int i = 0; i < n; i++ ) if( array[i] == value ) return i; return -1; }  What's its best case running time?  What's its worst case running time?  What's its average case running time?

40.  Insertion sort is a common introductory sort  It is suboptimal, but it is one of the fastest ways to sort a small list (10 elements or fewer)  The idea is to sort initial segments of an array, insert new elements in the right place as they are found  So, for each new item, keep moving it up until the element above it is too small (or we hit the top)

41. public static void sort( int[] array, int n) { for( int i = 1; i < n; i++ ) { int next = array[i]; int j = i - 1; while( j != 0 && array[j] > next ) { array[j+1] = array[j]; j--; } array[j] = next; } }

42.  What is the best case analysis of insertion sort?  Hint: Imagine the array is already sorted

43.  What is the worst case analysis of insertion sort?  Hint: Imagine the array is sorted in reverse order

44.  What is the average case analysis of insertion sort?  Much harder than the previous two!  Let's look at it recursively  Let E k be the average number of comparisons needed to sort k elements  E k can be computed as the sum of the average number of comparisons needed to sort k – 1 elements plus the average number of comparisons (x) needed to insert the k th element in the right place  E k = E k-1 + x

45.  We can employ the idea of expected value from probability  There are k possible locations for the element to go  We assume that any of these k locations is equally likely  For each turn of the loop, there are 2 comparisons to do  There could be 1, 2, 3, … up to k turns of the loop  Thus, weighting each possible number of iterations evenly gives us

46.  Having found x, our recurrence relation is:  E k = E k-1 + k + 1  Sorting one element takes no time, so E 1 = 0  Solve this recurrence relation!  Well, if you really banged away at it, you might find:  E n = (1/2)(n 2 + 3n – 4)  By the polynomial rules, this is  (n 2 ) and so the average case running time is the same as the worst case

48.  Finish algorithmic efficiency  Exponential and logarithmic functions

49.  Keep reading Chapter 11  Keep working on Assignment 9  Due Friday before midnight  Exam 3 is next Monday  Review on Friday