1. KX-NS1000
PBX to PBX Networking
For step by step : 16 May, 2012

2. Overview 1. PBX to PBX networking
Easy Programming
Overview
1. PBX to PBX networking
PBX to PBX networking of KX-NS1000 supports full feature transparency like TDE600-TDE620 connection. - Max.16 KX-NS1000 can be connected for one-look connection. - Both master unit and slave unit are “KX-NS1000”. - Slave unit can be installed in remote location. - Slave unit has to be registered to master unit like IP-PT registration. Programming is very easy because it is same as IP-PT registration.
TDE620 is connected with TDE600 by cable.
Master Register Slave Max. 15 slave NS1000 cab be registered to one master NS1000.
Digital PT IP-PT Digital PT is connected with PBX by cable. IP-PT is registered to PBX.
CO (NY)
IP Network
IP Network
CO (LA) .　
Register
CO (SF)

3. Overview 2. Master / Slave Indicator
The PBX mode (Master or Slave) is indicated by LED.
Indicators
<Master Unit>
<Slave Unit>
Software version and suffix such as “BX” have to be same for both main unit and slave unit.
BATT
ALARM
MASTER 3

4. Activation key installation to Master unit
Chapter 1
Activation key installation to Master unit
Master Register Slave 4

5. 1-1 Trial Activation Key
Master Unit
Activate pre-installed trial activation key for One-look network. - Standard activation key has to be installed before expiration (60 days). 5

6. 1-2 Standard Activation Key
Master Unit
Install standard activation key for One-look network if trial activation key has been already expired. 6

7. Slave unit data assignment to Master PBX
Master Unit
Chapter 2
Slave unit data assignment to Master PBX
Master Register Slave 7

8. 2-1 Add Site Wizard -1 Master Unit Click “Add Site”.
Home Screen of the Master unit
Click “Add Site”. 8

9. 2-2 Add Site Wizard -2 Master Unit PBX Setting Screen 1
1. Specify a Site name of Slave unit. 2
2. Set Time Zone and Local Time of Slave unit.
3. Click “Next”. 3
Registration Setting Screen 4
1. Select IP terminal registration mode of Slave unit.
2. Click “Next”. 9

10. 2-3 Add Site Wizard -3 Master Unit 5 SNTP Daylight Saving Screen
1. Set SNTP parameters.
2. Click “Next”. 6
Maintenance Setting Screen
1. Set SNMP parameters.
2. Click “Finish”. 10

11. 2-4 Add Site Wizard -4
Master Unit 7
The new slave unit is added.

12. Setup and Activation Key for Slave unit
Chapter 3
Setup and Activation Key for Slave unit
Master Register Slave 12

13. 3-1 Easy Setup Wizard -1
Slave Unit
Initialize KX-NS1000 Slave unit by default clear. And connect PC with KX-NS1000 Slave unit in order to start “Easy Setup Wizard”. 1
Location Setting Screen
1. Select “Slave” as a PBX type, and
specify the IP address of the Master. *
2. Click “Next”.
* If the slave is located on the same network with the Master, it is unnecessary to specify
the IP address of the Master.

14. 3-2 Easy Setup Wizard -2 Slave Unit 2. PBX Setting Screen 2
Site name is fixed.
(Will be downloaded from the Master.)
2. Set Time Zone and Local Time of slave unit.
3. Click “Next”. 3
3. LAN Setting Screen
Set the LAN settings for the slave unit.
2. Click “Next”.

15. 3-3 Easy Setup Wizard -3
Slave Unit
4. Registration Setting Screen 4
1. Select “Active” to enable trial activation key for One-look networking.
2. To finish the Easy setup wizard, click “Finish”.
3. To register to master unit, click “OK”. Registration mode of master unit has to start before or after this step. See chapter 4.
If trial activation key is expired, standard activation key is required. Step 1. Default Clear. Step 2. Set master mode by Easy setup. Step 3. Install activation key after Easy setup. Step 4. Default Clear and set slave mode by Easy setup.

16. Slave unit registration to Master unit
Chapter 4
Slave unit registration to Master unit
Master Register Slave 16

17. 4-1 Register Slave unit -1 Master Unit 1 Click “List View”.
Home Screen of the Master unit
Click “List View”.

18. 4-2 Register Slave unit -2 Master Unit 2 Click “Registration”. 3
1. Select slave units to be registered.
2. Click “==>” to move them to “Selected
sites for registration”.

19. 4-3 Register Slave unit -3 Master Unit 4 1. Confirm the slave units.
2. Click “Next” 5
The Registration process will start.

20. 4-4 Register Slave unit -4
Master Unit 6
The slave unit to add is accessing to the master unit after “Easy Setup Wizard” of slave unit (Chapter 3). 7
The Registration process will be completed.
After registration is completed, the slave unit will reboot automatically.

21. 4-5 Register Slave unit -5 The slave becomes INS (In-Service).
Master Unit 8
The slave becomes INS (In-Service).
Home Screen
After registration
Before registration
List View Screen
PBX version and so on is displayed.

22. Chapter 5
Conditions 22

23. 5-1 Demo or test after setup
Call SLT extension in master from SLT extension in slave. - Since SLT is connected with Master unit or Slave unit directly, it is better for demo to use SLT. - Extension number of SLT can be confirmed by Web-MC. See next page.
Off hook + 103
SLT (Ext 101)
SLT (Ext 102)
SLT (Ext 103)
SLT (Ext 104)
If IP phone is using extension number, 103, 104…., smallest idle numbers are assigned to SLT automatically.

24. 5-2 Site ID
Site ID is displayed to know location (Unit). - The “Site ID” is displayed for “CO Line Settings”, “DIL Table & port Settings”, “Doorphone”, “External Relay” and “External Sensor”.
Extension Setting example

25. Slave unit can be selected.
5-3 Slave setting through Master
Setting for slave unit is available through master unit. - For example, virtual IP card for slave unit can be installed, when Web-MC logs in to master PBX.
Slave unit can be selected.
Master
Slave

26. 5-4 Direct Log-in to branch unit
Direct log-in is used to setup Built-in VM in slave unit. - After direct log-in, Web-MC logs-out from master PBX automatically.
Built-in VM : 500
Master
Built-in VM : 501
Slave
Built-in VM : 500
Master
Built-in VM : 501
Slave

27. Thank you ! The END