1. Automatic xDSL Test Sequences of ELQ 30A
ELQ 30A provides automatic bi-directional Measurement of principal characteristics of the subscriber line using two instruments. They are connected to the ends of the tested pair in MASTER-SLAVE arrangement. The two instruments communicate over the tested pair.
■ The Master initializes the measurements and collects the results.
■ The Slave performs the measurements according to the Master’s commands and sends back the results. ELQ 30A can be programmed as MASTER or SLAVE as well.
Pre-programmed test parameter sets are provided containing:
■ Tolerance masks for Loss, LCL, Return Loss, Impedance measurement
■ Principal system parameters for VDSL2, VDSL1, ADSL2 +, ADSL, ADSL G LITE
READSL2, ADSL G LITE, ADSL G.LITE2, SHDSL, HDSL, ISDN etc. systems.
Using pre-programmed test parameter sets ELQ 30A provides immediate PASS/FAIL qualification and detailed information about the reasons of failure.
Selectable xDSL Systems
Selectable Test Programs
Results of VDSL, ADSL Test
Results of HDSL, SHDSL, ISDN Test
To learn more click on the selected topic!
ELEKTR NIKA

2. Selectable xDSL Systems
ELEKTR NIKA

3. Selectable Test Programs
Short Program means
measurement of:
■ Loss
■ Noise
Notice:
Loss and Noise measurements
are mandatory for data transfer speed calculation
Long Program means
measurement of:
■ Loss
■ Noise
■ Return Loss
■ Impedance
■ Balance
Free Program means:
Any combination
of measurements
ELEKTR NIKA

4. Detailed Results of VDSL and ADSL Qualification
ELEKTR NIKA

5. Detailed Results of HDSL/SHDSL/ISDN Qualification
ELEKTR NIKA

6. THANK YOU FOR YOUR ATTENTION!