1. Chapter Three: Stoichiometry Nick Tang 2 nd Period Ms. Ricks

2. 3.1 Chemical Equations + means reacts with,  means produces Chemicals to the left represent reactants, Chemicals to the right represent products The numbers in front of the formulas are coefficients while the small number on the bottom are called subscripts The coefficients lets you know how much there is of that substance, while the subscripts indicate its identity

3. Balancing Equations An equation is balanced once each side of the equation has the same amount of atoms of each element You can change the coefficients but never the subscripts It’s usually best to try to first balance the elements that occurs the least in the equation CH 4 + O 2  CO 2 + H 2 O We have 1 C on both sides, 4 H’s on the left while 2 H’s on the right, and 2 O’s on left and 3 O’s on the right Balance the H first on the left by putting a 2 in front of H 2 O and then balance the O’s by putting a 2 in front of the O 2 Final equation: CH 4 + 2O 2  CO 2 + 2H 2 O

4. Check Up Balance the following __Fe + __O 2  __Fe 2 O 3 ___ C 2 H 4 + __O 2  __CO 2 + __ H 2 O ___ Al + __HCL  __ALCL 3 + __H 2 4,3,2 1,3,2,2 2,6,2,3

5. Indicating the States of Reactants and Products The 4 states are solid (s), liquid (l), gas (g), and aqueous (aq) We use this to indicate the physical state of each substance CH 4(g) + 2O 2(g)  CO 2(g) + 2H 2 O (l)

6. 3.2 Some Simple Patterns of Chemical Reactivity Combination reactions: two or more substances react to form one product. Also when a metal combines with a nonmetal the product is an ionic solid. Ex: 2Mg + O 2  2MgO Decomposition reactions: one substance undergoes a reaction to produce two or more other substances. Ex: CaCO 3  CaO +CO 2

7. 3.2 Some Simple Patterns of Chemical Reactivity Cont. Combustion in Air. Combustion reactions are rapid reactions that produce a flame. Most of these reactions involve O 2 as a reactant When hydrocarbons are combusted they react with O 2 to make CO 2 and H 2 O C 3 H 8 + 5O 2  3CO 2 + 4H 2 O

8. Check Up Write equation for: Solid mercury(II) sulfide decomposes into its component elements when heated Write the balanced equation for the reaction that occurs when ethanol, C 2 H 5 OH is burned in air HgS  Hg + S C 2 H 5 OH + 3O 2  2CO 2 + 3H 2 O

9. 3.3 Formula Weights The formula weight of a substance is the sum of the atomic weights of each atom in its chemical formula Use the atomic masses from the periodic table and multiply with the subscripts and coefficients to find the weight Ex: FW of H 2 SO 4 = 2(AW of H) + (AW of S) + 4(AW of O) = 98.1amu Percent Composition: How much of a element contributes to the mass of the entire substance. Use this equation

10. Check Up Calculate the formula weight of sucrose C 12 H 22 O 11 Calculate the percentage of nitrogen, by mass, in Ca(NO 3 ) 2 342.0 amu 17.1%

11. 3.4 Avogadro’s Number and the Mole Mole(abbreviated mol) is the unit for dealing with atoms, ions, or molecules Avogadro’s number is 6.02E23 Molar Mass the mass in grams of one mole of a substance Make sure you know how to convert moles to atoms, grams to moles, moles to grams, and number of molecules and number of atoms from mass

12. Converting Moles to Number of Atoms Calculate the number of H atoms in 0.350 mol of C 6 H 12 O 6 First put how many moles you have and convert it to molecules. We know we have 6.02E23 molecules for every mole so multiply by 6.02E23 and then multiply by how many H atoms there are which in this case is 12 There are 2.53E24 H atoms

13. Converting grams to moles Calculate the number of moles of glucose (C 6 H 12 O 6 ) in 5.380 g of C 6 H 12 O 6 First put how much you have of the substance and then divide by it’s molar mass and multiply by 1 mol Put that in the calculator and you should get.02989 mol C 6 H 12 O 6

14. Converting moles to grams Calculate the mass, in grams, of 0.433 mol of calcium nitrate First put down how many moles of calcium nitrate you have and we know that one mol is equivalent to the molar mass of the compound so multiply.433mols of Ca(NO 3 ) 2 by its molar mass, 164.1g Ca(NO 3 ) 2 Answer: 71.1g Ca(NO 3 ) 2

15. Check Up Super Problem: How many glucose molecules are in 5.23g of C 6 H 12 O 6 ? How many oxygen atoms are in this sample? 1.75E22 molecules C 6 H 12 O 6 1.05E23 atoms O

16. 3.5 Empirical Formulas from Analyses The empirical formula tells us the simplest whole number ratio of moles of each element in a compound To find the empirical formula, first take the given masses of each element and divide by their atomic masses Afterwards determine the simplest whole number ratio of moles by dividing each number of moles by the smallest number of moles If you get decimals either round them if they are close(.9,.1) but if it’s too far from being a whole number such as 1.5 multiple it(and everything else) by a ratio to make it even

17. 3.5 Empirical Formulas from Analyses Cont. What is the empirical formula of vitamin C which contains 40.92% C, 4.58% H, and 54.50% O by mass

18. 3.5 Empirical Formulas from Analyses Cont. Molecular formula indicates the actual number of atoms of each element in one molecule of a substance To find the molecular formula you must have the molecular weight and the empirical formula weight You divide the molecular weight by the empirical formula weight to find your whole number multiple, which you use to multiply the subscripts in the empirical formula molecular weight Whole-number multiple= -------------------------------- empirical formula weight

19. 3.5 Empirical Formulas from Analyses Cont. Determine the molecular formula of C 3 H 4 which has a molecular weight of 121 amu

20. 3.5 Empirical Formulas from Analyses Cont. Combustion analysis is commonly used for compounds containing carbon and hydrogen as their component elements CO 2 and H 2 O are produced and from the masses of CO 2 and H 2 O we can calculate the empirical formula If there is a third element we can find it’s mass by subtracting the total mass by the mass of C and H

21. Combustion Analysis Combustion of 0.255g of isopropyl alcohol produces 0.561g of CO 2 and 0.306g of H 2 O. Determine the empirical formula

22. Combustion Analysis Cont.

23. 3.6 Quantitative Information from Balanced Equations 2H 2 + O 2  2H 2 O The quantities 2 mol H 2, 1 mol O 2, and 2 mol H 2 O are called stoichiometric ally equivalent quantities This shows the stoichiometric relations can can be used to convert between quantities of reactants and products in a chemical reaction

24. 3.6 Quantitative Information from Balanced Equations How many grams of water are produced in the oxidation of 1.00g of glucose, C 6 H 12 O 6 ? C 6 H 12 O 6 + 6O 2  6CO 2 + 6H 2 O

25. 3.7 Limiting Reactants The limiting reactant is the reactant that is completely consumed and determines the amount of product formed The other reactant is called the excess reactant which is what is left over N 2 + 3H 2  2NH 3 How many moles of NH 3 can be formed from 3.0 mol of N 2 and 6.0 mol of H 2

26. 3.7 Limiting Reactants Conti. We don’t have 9 moles of H 2 therefore H 2 is the limiting reactant Now go from moles of H 2 to moles of NH 3

27. 3.7 Theoretical Yields Theoretical yield is the quantity of product that is calculated to form when all of the limiting reactant reacts The amount of product actually obtained in a reaction is the actual yield The actual yield is almost always less than the theoretical due to some parts of the reactants not reacting or some other outside force but never will it be higher than the theoretical Percent yield relates the actual to the theoretical using this equation Actual Yield Percent Yield= ---------------------------- X 100% Theoretical Yield

28. 3.7 Theoretical Yields Cont. 2C 6 H 12 + 5O 2  2H 2 C 6 H 8 O 4 + 2H 2 O Assume that you carry out this reaction starting with 25g of C 6 H 12 and that C 6 H 12 is your limiting reactant. What’s the theoretical yield of 2H 2 C 6 H 8 O 4 ? If you obtain 33.5g of 2H 2 C 6 H 8 O 4 what is the percent yield for 2H 2 C 6 H 8 O 4 ?