Download presentation
Presentation is loading. Please wait.
Published byOswaldo Scragg Modified over 9 years ago
1
Prof. David R. Jackson Dept. of ECE Notes 16 ECE 5317-6351 Microwave Engineering Fall 2011 S -Parameter Measurements 1
2
2
3
Test cables Hewlett-Packard 8510 DUT Port 1 Port 2 DUT Vector Network Analyzer (VNA) 3
4
Network Analysis of VNA Measurement 4
5
S-Parameter Measurements Error boxes contain effects of test cables, connectors, couplers,… 5
6
S-Parameter Measurements (cont.) This is called “de-embedding.” 6
7
“Short, open, match” calibration procedure Calibration loads ConnectCalibration SC OC +1 Z00Z00 shortopenmatch Recall from Notes 15: 7
8
“ Thru-Reflect-Line (TRL)” calibration procedure Calibration (cont.) 8 This is an improved calibration method that involves three types of connections: 1)The “thru” connection, in which port 1 is directly connected to port 2. 2) The “reflect” connection, in which a load with an (ideally) large (but not necessarily precisely known) reflection coefficient is connected. 3) The “line” connection, in which a length of matched transmission line (with an unknown length) is connected between ports 1 and 2. The advantage of the TRL calibration is that is does not requires precise short, open, and matched loads. This method is discussed in the Pozar book (pp. 193-196).
9
Z -Parameter Extraction Assume a reciprocal and symmetrical waveguide or transmission-line discontinuity. Examples Waveguide post Microstrip gap We want to find Z 1 and Z 2 to model the discontinuity. 9
10
Plane of symmetry (POS) POS Z -Parameter Extraction (cont.) 10
11
Assume that we place a short or an open along the plane of symmetry. Z -Parameter Extraction (cont.) 11
12
The short or open can be realized by using odd- or even-mode excitation. Z -Parameter Extraction (cont.) T + - + + Odd mode excitation Even mode excitation Incident voltage waves 12 The even/odd-mode analysis is very useful in analyzing devices (e.g., using HFSS).
13
De-embeding of a Line Length We wish the know the reflection coefficient of a device under test (DUT), but the DUT is not assessable directly – it has an extra length of transmission line connected to it. 13
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.