1. Hypothesis: It is an assumption of population parameter ( mean, proportion, variance) There are two types of hypothesis : 1) Simple hypothesis :A statistical hypothesis which specifies the population completely (i.e. the form of probability distribution and all parameters are known) is called a simple hypothesis. 2) Composite hypothesis : A statistical hypothesis which does not specifies the population completely (i.e. the form of probability distribution or some parameters remain unknown) is called a composite hypothesis.

2. Hypothesis Testing or Test of Hypothesis or Test of Significance : Hypothesis testing is a process of making a decision on whether to accept or reject an assumption about the population parameter on the basis of sample information at a given level of significance. Null Hypothesis : It is the assumption which we wish to test and whose validity is tested for possible rejection on the basis of sample information. It is denoted by Ho Alternative Hypothesis : It is the hypothesis which differs from the null hypothesis. It is not tested It is denoted by H1 or Ha Level of significance : It is the maximum probability of making a type I error when the null hypothesis is true as an equality.

3. For test of hypothesis involving large samples i.e. > 30 t-test
It is usually expressed as % and is denoted by symbol α( called alpha) It is used as a guide in decision making. It is used to indicate the upper limit of the size of the critical region TEST STATISTIC
Test Statistic
Used for
Z test
For test of hypothesis involving large samples i.e. > 30
t-test
For test of hypothesis involving small samples i.e. < 30
And if σ is unknown χ2
For testing the discrepancy between observed frequency and expected frequency without any reference to population parameter

4. Critical Region or Rejection Region : Critical region is the region which corresponds to a pre-determined level of significance. The set of value of the test statistic which leads to rejection of the null hypothesis is called region of rejection or Critical region of the test. Conversely the set of values of the test statistic which leads to the acceptance of Ho is called region of acceptance. Critical Value : It is that value of statistics which separate the critical region from the acceptance region. It lies at the boundary of the regions of acceptance and rejection. Size of critical region : The probability of rejecting a true null hypothesis is called as size of critical region.

5. Type I and type II error: The decision to accept or reject null hypothesis Ho is made on the basis of the information supplied by the sample data. There is always a chance of committing an error Type I error: This is an error committed by the test in rejecting a true null hypothesis. The probability of committing type I error is denoted by ‘α’ , the level of significance. Type II error : This is an error committed by the test in accepting a false null hypothesis. The probability of committing type II error is denoted by ‘β’.

6. Statistical decision of the test Ho is true Ho is false
True situation
Statistical decision of the test
Ho is true
Ho is false
Correct decision
Type I error
Type II error
Degrees of freedom: It means the number of variables for which one has freedom to choose. Need for degree of freedom: Influence the value of discrepancy between the observed and expected values

7. Case
Formula for d.o.f
Example
In case of one sample [ say n=50]
Sample size (n)-1
50-1=49
In case of two sample
[say n1 =50,n2=60]
(n1 - 1) + (n2 -1 ) Or
n1 + n2 – 2
(50-1)+(60-1) = 108
( ) = 108
P –value : It is the probability , computed using the test statistic, that measure the support ( or lack of support) provided by the sample for the null hypothesis.

8. Critical Region
Set of all values of the test statistic that would cause a rejection of the null hypothesis
Critical
Region

9. Critical Region
Set of all values of the test statistic that would cause a rejection of the
null hypothesis
Critical
Region

10. Critical Region
Set of all values of the test statistic that would cause a rejection of the
null hypothesis
Critical
Regions

11. Critical Value
Value (s) that separates the critical region from the values that would not lead to a rejection of H 0
Critical Value
( z score )

12. Left-tailed Test H0: µ ³ 200 H1: µ < 200 Points Left Values that
Reject H0
Fail to reject H0
Values that
differ significantly
from 200
200

13. Right-tailed Test H0: µ £ 200 H1: µ > 200 Points Right Values that
Fail to reject H0
Reject H0
Values that
differ significantly
from 200
200

14. a is divided equally between the two tails of the critical
Two-tailed Test
H0: µ = 200
H1: µ ¹ 200
a is divided equally between
the two tails of the critical
region
Means less than or greater than
Reject H0
Fail to reject H0
Reject H0
200
Values that differ significantly from 200

15. Lower Tail Test
Upper Tail Test
Two-Tail Test
Hypothesis
Ho : μ ≥ μo
H1 : μ < μo
Ho : μ ≤ μo
H1 : μ > μo
Ho : μ = μo
H1 : μ ≠ μo
Test Z
Rejection Rule p-value approach
Reject Ho if p-value ≤ α
Rejection rule critical value approach
Reject Ho if Z ≤ -Zα
Reject Ho if Z ≥ Z α
Reject Ho if Z ≤ -Zα or Z ≥ Z α

16. Student t Distribution
If the distribution of a population is essentially normal, then the distribution of
t =
x - µ s n
Student t distribution is usually referred to as the t distribution.
is a Student t Distribution for all samples of size n. It is often referred to as a t distribution and is used to find critical values denoted by t/2.

17. t = x – µx n t-distribution (DF = 24) Assume the conjecture is true!
Test Statistic:
S / n
Critical value =
1.71 * 8000/ = 32736
Fail to reject H0
Reject H0
30 K
( t = 0)
32.7 k
( t = 1.71 )

18. Margin of Error E for Estimate of  (With σ Not Known)
Formula 7-6
where t/2 has n – 1 degrees of freedom. n s
E = t/ 2
Table lists values for tα/2

19. Notation  = population mean = sample mean
s = sample standard deviation
n = number of sample values
E = margin of error
t/2 = critical t value separating an area of /2 in the right tail of the t distribution
Smaller samples will have means that are likely to vary more. The greater variation is accounted for by the t distribution.
Students usually like hearing about the history of how the Student t distribution got its name.
page 350 of text
See Note to Instructor in margin for other ideas.

20. Important Properties of the Student t Distribution
1. The Student t distribution is different for different sample sizes (see the following slide, for the cases n = 3 and n = 12).
2. The Student t distribution has the same general symmetric bell shape as the standard normal distribution but it reflects the greater variability (with wider distributions) that is expected with small samples.
The Student t distribution has a mean of t = 0 (just as the standard normal distribution has a mean of z = 0).
As the sample size n gets larger, the Student t distribution gets closer to the normal distribution.

21. Application of t-distribution
To test the significance of the mean of random sample
To test the significance of the difference between the mean of two independent samples
To test the significance of the difference between the mean of two dependent samples of the paired observation
To test the significance of an observed correlation coefficient.

22. Choosing the Appropriate Distribution
Use the normal (z) distribution
 known and normally distributed population or  known and n > 30
Use t distribution
 not known and normally distributed population or  not known and n < 30
Chi Square Method
Use a nonparametric method or bootstrapping
Population is not normally distributed

23. Where O= observed frequencies ,E= Expected frequencies
𝛘2 Defined :
It is pronounced as Chi-Square test is one of the simplest and most widely used non-parametric tests in statistical work. It describes the magnitude of the discrepancy between theory and observation. It is defined as
𝛘2 =
Where O= observed frequencies ,E= Expected frequencies
Rejection Rule :
p- value approach : reject Ho if p-value ≤ α
critical value approach :reject Ho if 𝛘2 ≥ 𝛘α2
where α is the level of significance with n rows and n columns provide (n-1)(m-1) degrees of freedom

24. Properties of the Distribution of the Chi-Square Statistic
The chi-square distribution is not symmetric, unlike the normal and Student t distributions.
As the number of degrees of freedom increases, the
distribution becomes more symmetric.
Different degrees of freedom produce different shaped chi-square distributions.
Chi-Square Distribution
Chi-Square Distribution for
df = 10 and df = 20

25. Properties of the Distribution of the Chi-Square Statistic
1. The values of chi-square can be zero or positive, but they cannot be negative.
2. The chi-square distribution is different for each number of degrees of freedom, which is d.f = n – 1. As the number of degrees of freedom increases, the chi-square distribution approaches a normal distribution.
In Table, each critical value of 2 corresponds to an area given in the top row of the table, and that area represents the cumulative area located to the right of the critical value.

26. Condition when applying chi-square test
In the first place N must be reasonably large to ensure the similarity between theoretically correct distribution and our sampling distribution of 𝛘2 it is difficult to say what constitutes largeness, but as a general rule 𝛘2 test should not be used when N is less than 50, however few the cells
No theoretical cell frequency should be small when the expected frequency are too small., the value of 𝛘2 will be overestimated and will result in too many restrictions of the null hypothesis
The constraints on the cell frequencies if any should be linear