1. (Machine Maintenance Information System)
Welcome to MMIS
(Machine Maintenance Information System)

2. Modules
ISO i.e. all the necessary Maintenance activities and machine are involved to running the Industry in well position.
General i.e. all the necessary Maintenance activities and machine are involved to boost up your industry.
Other i.e. all those machine and activities that are not applicable on production machine but it will be the part of life and industry.

3. Division Similarly as module MMIS divide its working for two part
Maintenance
Engineering

4. Responsibility MMIS give user wise responsibility
One Responsibility
Multiple Responsibility

5. Opportunity and Limitation
MMIS allows each user to work only for a division.
MMIS allows to user only for a module at the time login
If they wants to work on another module then first exit it and then again login for the new module

6. Sections Each division have multiple section like :
Mechanical
Electrical
Instrumental
Electronics
Etc.

7. Activity Each section have multiple or different activities like :
Cleaning
Preventive Maintenance
Repairing
etc

8. Sub Activities Each activity have various works called as sub activities
Cots buffing
Oil changing
Greasing
Screw tightening
Connection checking
Etc.

9. Parts Sometimes at the time Maintenance required the new parts
so that MMIS gives a facility to create a Part master

10. Machine and Instruments
The maintenances would be done either Machine or Instrument.
So that MMIS allows to Maintain the Machine Master

11. Department Each machine belonging to a particular department
Or say the Industry have various department and each department have multiple machines
So that MMIS allows to maintain the various departments by feeding in Department Master

12. Parameter Each machines have various parameters like :
Make
Model
Mfd. Year
Type of Motor
Speed
Guage
etc

13. Unit Each Parameter have its different unit like :
RPM
MPM
No. Kg
Feet Mm
etc

14. Work Centers
Each machine can be consider into one Work center or say Cost center

15. Schedule
For finding out the next month/week(s) schedule first necessary to feed up the machine wise activity wise last maintenance date, its cycle and the torlence limit etc.
On the basis of above values MMIS, calculates the next schedule of each machine and each activity automatically.

16. Maintenance Entry
Whenever the user maintain the machine, he does some work on the machine. He can identify its all work and if they have replaced the parts then its information to MMIS.
MMIS will be prepared the next schedule on the basis of Job date and its cycle.
MMIS will also keep all the records in the system, so that user can view the data as various types.

17. Reports
On the basis of maintenance done by user MMIS gives various outputs as required by the user within a minute of time like :
Preparing the next month of schedule plan, Find out the maintenance due report
Preparing the Maintenance Register etc.
All these outputs would be given in the various type like date wise, machine wise, activity wise etc.

18. Thanking you