2. What is “3-D Ripple Print”? 3-dimensional transparent print or Special embossed color print on cellulosic goods  Exclusive recipe by “Permafin-PN..” system  Primarily for cellulosic goods  Unique and exceptional print  Fully creative finish

3. 1. Additives for Transparent & Ripple Print Permafin-PB-37, Permafin-PN-01 Permafin-RPP, Permafin-PN-119 Crosslinker-UX, Microderm-SKC Aquarepel-XC/Conc, Aquarepel-EX-001M Triplex-PTF, Altraplex-AW 2.Recipe for Transparent and Ripple print i)Roller Print [mangle padding] – for woven ii)Rotary print – for woven iii)Rotary print – for knit

4. Specification Additives ItemCompositionAppearancepH [10%] IonicitySolubility [in water] Permafin-PN-01 Permafin-PN-37 Permafin-PN- 119 Special urethane resins for ripple print [soft handle] Colorless to slightly yellowish viscous liquid 7 ± 1 5.5 ± 1 Nonion Easily soluble at cold or warm water Permafin-RPPSpecial urethane resins for ripple print [stiff handle] Light beige viscous liquid 5 ± 1NonionEasily soluble at cold or warm water Crosslinker-UXCatalyst of Urethane resins Light beige viscous liquid 5 ± 1NonionEasily soluble Aquarepel-FC- 1500 Fluoro polyacrylateWhite to yellowish liquid2.5 ± 0.5 CationEasily soluble Aquarepel-EX- 001M Blocked polyisocyanate Light beige Dispersion 7 ± 1NonionEasily soluble Altraplex- AWOrganic phosphoric compound Light yellowish clear liquid9 ± 1Weak anion Easily soluble Microderm- SKC Special silicone copolymer Milky white liquid4.5 ± 1NonionEasily soluble Triplex-PTFSpecial polymerOff white liquid> 5AnionSoluble

5. Permafin- PN-37 Permafin- PN-01 Permafin- PN 119  Urethane resin for transparent print and color print  Excellent alkaline stability. No hydrolysis problem  Prevent staining of dyes in washing process  Good transparency and vivid print on goods  Film with soft handle [PN 119*>PN 37 > PN-01]  Permafin- PN 119 provides more volume Additives

6. Permafin- RPP  Urethane resin for transparent print and color print  Excellent alkaline stability. No hydrolysis problem  Prevent staining of dyes in washing process  Good transparency and vivid print on goods  Good volume feeling to the clothes and bed clothes  Film with medium to stiff handle Additives

7. CROSSLINKER-UX  Catalyst for urethane resin  Promotes activation and fixation of Urethane resin  Applying quantity: 5 ~ 10% of urethane resin applied MICRODERM-SKC  Specific softener for Ripple print [only for knit]  Form film by itself without any bad influence on print  Applying quantity: 30 ~ 50 g/l Additives

8. AQUAREPEL-FC 1500 Film protector for color Ripple print [by reactive dyes] Prevent color change/lost of dyes under strong alkalis Aquarepel-EX-001M Catalyst of FC 1500 in color ripple print Prevent drape property of fabrics Applying quantity: ca. 20% of FC 1500 applied Additives

9. Altraplex- AW Used in washing process after alkali ageing of Ripple Print Prevent yellowing of transparent print film after drying When neutralizing by Acid, used jointly in a bath Applying quantity: 3~5 g/l Additives Triplex-PTF Thickener for viscosity control Applying quantity: x% [for viscosity ca. 5000 cps

10. 1. Roller Print for Woven Recipe: Permafin--RPP : 95% Crosslinker-UX : 5% Thickener [Triplex-PTF] : x% [ca. 5000 cps of viscosity] ** If softer handle is required, increase the quantity of Permafin- PN-01 [or PN 37, PN 119, Microderm-SKC] while reducing the quantity of Permafin--RPP Print condition: Mangle padding [Roller Print]  Setting [190ºC x 100 yd/mm]  Alkali treatment [98% NaOH 32º ~ 35º Be]  Rinsing & neutralizing  Tentering [170ºC x 70 yd/min] Application

11. 2. Rotary print for woven Recipe: Permafin- PN-01 : 70% [or Permafin- PN 37, PN 119] Permafin- RPP : 25% Crosslinker-UX : 5% Thickener [Triplex-PTF] : X% [ca. 5000 cps of viscosity] Print condition: Printing  Curing [180ºC x 2 min]  Padding [98% NaOH 320 ~ 350 g/l]  Rinsing & neutralizing  Tentering [180ºC x 90 sec] Application

12. 3. Rotary print for knit: Recipe: Permafin- PN-01 : 55% [or Permafin- PN 37, PN 119] Permafin- RPP : 25% Crosslinker-UX : 5% Microderm- SKC : 15% Thickener [Triplex-PTF] : X% [ca. 5000 cps for viscosity] Print condition: Pre-treatment  Printing  Curing [180ºC x 2 min]  Padding [98% NaOH, 320~350 g/l]  Rinsing & neutralizing  tentering [180ºC x 1 min 30 sec] Application