Download presentation
Presentation is loading. Please wait.
Published byMattie Bumpass Modified over 9 years ago
1
www.tankbau.com Jan Bremert Technical Director Tba International GmbH & Co. KG Fabersweg 1 22848 Norderstedt Germany Phone.: 01149 40 734 4090-11 Fax: 01149 40 523 6081 E-Mail: j.bremert@tankbau.com Increasing Service-Life of Cut-and-Cover Tanks by
2
Cut-and Cover Tanks of the US Forces mostly built in the 1950s Single-walled Corrosion problems Deformations caused by ground water Structural damages Operational problems
3
Internal corrosion
4
Damaged bottom weld seam
5
Deformations in Tank Bottom
6
Advantages of renewing old tanks Purchase of new property is not necessary construction permit is not required no changes in infrastructure
7
Additional Advantages of Cut-and-Cover Tanks no fire protection facilities required secondary containment outside the tank is not required less safety distance between the tanks
8
Leak Protection Lining Primary skin Interstitial space Secondary skin Structural tank
9
Option 1 Single-skin Lining Application on tank bottom and wall guarantees the tightness of the tank corrosion protection is included Used if leak monitoring is not required
10
Option 2 System is permanently monitored by leak detector device Highest level of safety and environmental protection Meets all European government regulations Is recommended by NATO and USAFE Has an Equipment Approval from Florida DEP Double-skin Lining
11
Pore Testing High Voltage Pore Test 1. Sealing with polyester resin High Voltage Pore Test 2. Sealing with polyester resin High Voltage Pore Test
12
Tank Renovation at Tank Farm Vidin, Bulgaria Main problems: Pit corrosion in the tank bottom Single-skin bottom Internal support construction for center column
13
Flexible Manufacturing Integration of pipes
14
Flexible Manufacturing Integration of columns
15
Solution for special Constructions Integration of steel constructions on tank bottom
16
Tank Renovation on US Air Base Incirlik, Turkey Main problems: Heavy Corrosion in the tank wall Pit corrosion in the tank bottom Corrosion at the tank roof Tank bottom without slope to the pump sump
17
US Air Base Incirlik, Tank 3
18
Steel fibre concrete at tank bottom
19
US Air Base Incirlik, Tank 3 Shotcrete application at tank wall
20
US Air Base Incirlik, Tank 3 Concrete wall and coating at tank roof and columns
21
US Air Base Incirlik, Tank 3 tba leak protection lining
22
Tank Reconstruction New Tank Construction cost: $ 4.5 million Restorated Tank Construction cost: $ 1.5 million
23
Tank Renovation in Arahal, Spain Main problems: Deformations in the tank bottom Pit corrosion in the tank bottom Cracks in the welding seams Heavy corrosion at the tank roof Tank bottom without slope to the pump sump
24
New concrete bottom with leak protection lining Arahal Tank 206
25
Arahal Tank 208 Just using the existing manholes No additional openings in the tank necessary
26
Arahal Tank 206 Coating of Tank Roof and Columns
27
Final conductive Coating on Tank Bottom and Wall (if required) Arahal Tank 206
28
tba Leak Protection Lining Reliable system System with low operation costs Used for more than 40 years in storage tanks acc. to standard design US Air Forces Europe No corrosion problems Long service life
29
www.tankbau.com Restoration of cut and cover tanks with Leak Protection Lining = An easy and cost-saving Way
30
www.tankbau.com Tank retrofitting and reconstruction >>> There is always a solution <<<
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.