Download presentation
Presentation is loading. Please wait.
Published byKaitlynn Choyce Modified over 9 years ago
1
Rural Intelligent Transportation Systems Rural Intersection Accident Mitigation New Mexico ITS 2011 Sandia Casino, NM November 4 2011 New Mexico ITS 2011 Sandia Casino, NM November 4 2011 John Hansen VP Sales AM Signal /Delegate to NCMUTCD
2
Problem The problem of rural road crashes (lane departure, intersection, merges, etc.) and the resulting fatalities, serious injury and property damage is real. Bottom line, how to develop low-cost, readily deployable, low maintenance systems that can be used by government agencies to improve safety on rural roads and non-signalized rural intersections. Case Study Rural Minnesota Intersection
3
Problem Minnesota Motor Vehicle Crash Facts, 2009 –421 fatalities down from 455 in 2008 –31,074 injuries down from 33,379 in 2007 –Rural areas account for 2 out of 3 fatalities –1/3 involve single vehicle –2/3 involve 2 or more vehicles –2009 crashes cost Minnesota $1.5 billion
4
Underlying Causes In Single Vehicle Crashes –Illegal or unsafe speed contributing factor most often cited for all drivers In Multiple Vehicle Crashes –For drivers through age 64 – driver inattention or distraction most often cited –Failure to yield second most common Over Age 65 Pattern Reverses –Failure to yield most common –Driver inattention or distraction second most common
5
Driving Conditions Most Crashes Occur in Good Driving Conditions –Over 50% of fatal and about 2/3 of nonfatal occur during daylight hours –Good Weather Conditions Over 60% of fatal and about 56% of nonfatal – “clear” weather –Road Surface Condition for Fatal Crashes Usually “good” 10% on wet roads 15% on snowy or icy roads –Road Surface Condition for Nonfatal Crashes 60% of nonfatal on dry roads 13% on wet roads 25% on snowy or icy roads
6
Literature Search Discovered considerable research Found few off-the-shelf products available Found almost nothing to address –low-volume dynamic rural intersection warning systems –dynamic lane departure warning systems specifically relating to horizontal curves
7
The Solution SEH and NTT working with the other major participants have been developing and demonstrating low-cost, portable systems that can be used by counties on low-volume roads and intersections to reduce crashes and move Toward Zero Deaths. The technologies used are integrations of commercial off-the-shelf (COS) technologies. Utilized together as a system they represent an innovative low-cost approach and better understanding and solving serious safety problems.
8
Rural ITS Toolbox
9
Rural ITS Intersection Warning System (IWS) Driver Behavior Evaluation System (DBES) Stop Sign Warning System (SSWS) Curve Warning System (CWS)
10
Intersection Warning System Major Participants Mn/DOT 2007 Innovative Ideas Program – OTST USDOT - FHWA Hennepin County, MN SEH Inc. Network Transportation Technologies, LLC (NTT)
11
Project Goal Develop a low-cost, readily deployable, low maintenance system that can be used to improve safety at low volume, non- signalized intersections.
12
Innovation Merits of dynamic warning systems Moving from research to reality Off-the-shelf components Solar/Battery powered Modular design Ease of installation and maintenance Relative low-cost
13
System Configurations Solar Radar Controller User Interface Communications (Radio) Battery Solar Battery SIGN Controller Communications (Radio) Fault Indicator Detection NodeWarning Node
14
CR 47 and Lawndale Lane
15
Going Live
16
Solar Panel & Controller Cabinet
17
Controller Cabinet Electronics
18
IWS In Operation
19
CR 47 West Detector Node Looking East
20
Safety Impacts 54% reduction in the number of “conflicts” Reduction from 3.9 to 1.8 conflicts per 1000 vehicles
21
Owner Satisfaction (Data from Evaluation Report prepared by SRF) Reliable and effective at warning drivers of approaching cross-street traffic Easy to install and maintain Relatively low fixed cost Transferable
22
User Perception 94.2% were aware of the sign 88.5% understood the meaning of the sign 79.4% had improved awareness of approaching traffic 65.2% are more likely to stop when sign is flashing Half of survey respondents indicated they pay more attention when the sign is flashing
23
Performance Operated with a 98.6% uptime during 6 month test period Experienced 3 failures during the 6 month test period Worked well in all weather conditions Continuous operation for over 3 years
24
Rural ITS Safety Systems (RITSS) Mn/DOT’s 2009 Innovative Ideas Program that included the following elements: –Driver Behavior Evaluation System (DBES) currently being evaluated in Olmsted County, MN – Stop Sign Warning System (SSWS) currently being evaluated in Washington County, MN –Curve Warning System (CWS) currently being evaluated in Wright County, MN
25
Driver Behavior Evaluation System (DBES) Concept Need to know exactly what the problem is: –System to provide reliable data –Driver behavior underlying the problem –At rural intersection stop signs Behavior of driver approaching stop sign Behavior of driver on through road Speed profiles –At horizontal curve Behavior of driver approaching curve Speed profile
26
Driver Behavior Evaluation System Hardware –Doppler radar –GPS receiver –Data logger –Battery powered with life of 3 weeks –Up to 4 devices to cover 4-way intersection –Single device to cover each approach to a curve Software –Analysis and reporting strategies
27
DBES Field Unit
28
Driver Behavior Evaluation System Olmsted County, MN TH 42/CSAH 9
29
Stop Sign Warning System (SSWS) Concept Radar-based detection to monitor speed profile of vehicle approaching a stop sign Provide a flashing warning of the stop based on speed –Within normal stop profile – No warning –Excessive speed detected – flashing lights to alert driver
30
Stop Sign Warning System Hardware –Doppler radar –Wireless link –Controller –Flasher stop sign –Fault notification Software –Speed/distance data algorithm to set parameters –Determine spatial position of the vehicle –Activate flashers
31
Stop Sign Warning System Design Deceleration Rate = 14.8 ft/s 2 Maximum Approach Speed Design = 80 mph Duration of Flash = Detection Speed / 14.8 ft/s 2 Enhance Border of Near Right Stop Sign On-Site Fault Notification Device
32
Curve Warning System (CWS) Concept Radar-based detection to monitor speed profile of vehicle approaching a horizontal curve Provide a flashing warning of the curve ahead based on speed –Within normal speed reduction profile – No warning –Excessive speed detected – flashing lights to alert driver
33
Curve Warning System Design Deceleration Rate = 14.8 ft/s 2 Design for Curve Entry Speed = 47 mph (posted 40 mph) Maximum Approach Speed Design = 75 mph Enhance Chevron Signs 3, 4, 5 and 6 Duration of Flash = 4 seconds from curve entry (50 mph to Sign 6 from Curve Entry)
34
Curve Warning System Line of Sight Washington County
35
Curve Warning System Installation
36
CSAH 17 & CSAH 42 Intersection
37
Mainline Warning Node
38
Wright County Active warning Node for vehicles approaching the stop sign on the minor road Solar/Battery Controller/Radio Default notification
39
Questions ? John Hansen/John Morast PE Application Consultants AM Signal Inc 720.348.6925
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.