Presentation is loading. Please wait.

Presentation is loading. Please wait.

Inventor Work File: “work Sa” – Tube is mated to rotate on claw – Smoke polycarb is the 84” envelope – Smoke polycarb height is 45” (feeder station height)

Published bySarah Frisbie Modified over 9 years ago

Similar presentations

Presentation on theme: "Inventor Work File: “work Sa” – Tube is mated to rotate on claw – Smoke polycarb is the 84” envelope – Smoke polycarb height is 45” (feeder station height)"— Presentation transcript:

1 Inventor Work File: “work Sa” – Tube is mated to rotate on claw – Smoke polycarb is the 84” envelope – Smoke polycarb height is 45” (feeder station height) tube-floor Mate: puts tube on floor (sliding) tube-feeder Mate: puts tube at feeder level (sliding) tube-FloorMaxRear Mate: tube @ angle for max envelope for floor pickup tube-FeederMaxRear Mate: tube @ angle for max envelope feeder pickup Grid Left Mate: suppress on-off to flip the Grid left of the robot Grid Right Mate: suppress on-off to flip the Grid right of the robot tube-FloorMinRear Mate: tube @ angle for min floor pickup arm-FloorMaxRear Mate: arm & angle for max floor pickup

2 Floor PickupRearMax Envelope

3 To Top-Outside ScoreFrontForward Lean

4 Floor PickupRearMax Envelope To Top-Inside ScoreFrontForward Lean

5 Floor PickupRearMax Envelope To Mid-Inside ScoreFrontForward Lean

6 Floor PickupRearMax Envelope To Low-Outside ScoreFrontForward Lean(ish)

7 Floor PickupRearMax Envelope To Mid-Inside ScoreRearForward Lean

8 Floor PickupRearMax Envelope To Mid-Outside ScoreRearForward Lean

9 Floor PickupRearMax Envelope To Low-Inside ScoreRearForward Lean

10 Floor PickupRearMax Envelope To Low-Inside ScoreRearForward Lean Not so much…

11 Floor PickupRearMax Envelope To Top-Outside ScoreFrontBackward LeanClose…

12 Floor PickupRearMax Envelope To Top-Outside ScoreFrontBackward Lean

13 Floor PickupRearMax Envelope To Mid-Inside ScoreFrontBackward Lean

14 Floor PickupRearMax Envelope To Mid-Outside ScoreFrontBackward Lean

15 Floor PickupRearMax Envelope To Low-Inside ScoreFrontBackward Lean

16 Feeder PickupRearMax Envelope

17 To Mid-Inside ScoreFrontForward Lean

18 Feeder PickupRearMax Envelope To Mid-Outside ScoreFrontForward Lean

19 Feeder PickupRearMax Envelope To Low-Inside ScoreFrontForward Lean(er)Not Sure

20 Feeder PickupRearMax Envelope To Low-Inside ScoreFrontForward Lean(er)Not Sure

21 Feeder PickupRearMax Envelope To Low-Inside ScoreFrontForward Lean(est)Probably Not

22 Feeder PickupRearMax Envelope To Top-Inside ScoreRearForward LeanNot Sure

23 Feeder PickupRearMax Envelope To Top-Outside ScoreRearForward Lean

24 Feeder PickupRearMax Envelope To Mid-Inside ScoreRearForward Lean

25 Feeder PickupRearMax Envelope To Mid-Outside ScoreRearForward Lean

26 Feeder PickupRearMax Envelope To Low-Inside ScoreRearForward Lean (not by much)

27 Feeder PickupRearMax Envelope To Top-Inside ScoreFrontBackward Lean

28 Feeder PickupRearMax Envelope To Top-Outside ScoreFrontBackward Lean

29 Feeder PickupRearMax Envelope To Low-Inside ScoreRearBackward Lean

30 Feeder PickupRearMax Envelope To Low-Outside ScoreRearForward Lean

Download ppt "Inventor Work File: “work Sa” – Tube is mated to rotate on claw – Smoke polycarb is the 84” envelope – Smoke polycarb height is 45” (feeder station height)"

Similar presentations

Directions: Form into Teams (up to 7 team members) Clear your tables and move chairs against the wall Only 4 people will participate per iteration Four.

Directions: Form into Teams (up to 7 team members) Clear your tables and move chairs against the wall Only 4 people will participate per iteration Four.
HS-22M+Loader. Boxway provides heavy cutting ability and Boxway provides heavy cutting ability and reducing the C/T reducing the C/T Compact size for.

HS-22M+Loader. Boxway provides heavy cutting ability and Boxway provides heavy cutting ability and reducing the C/T reducing the C/T Compact size for.
MCC8.G.1, 2, and 3 Translation Reflection Rotation.

MCC8.G.1, 2, and 3 Translation Reflection Rotation.
Answer the following questions using yesterday’s Translation Task: 1.What is a transformation? 2.What are vertices? 3.When does it mean when geometric.

Answer the following questions using yesterday’s Translation Task: 1.What is a transformation? 2.What are vertices? 3.When does it mean when geometric.
4 Bar Linkage: Thinking in the Box Siri Maley FIRST Team 1640, 28 January 2011.

4 Bar Linkage: Thinking in the Box Siri Maley FIRST Team 1640, 28 January 2011.
Position b 90 0 to position a Bubble still follows LEFT THUMB.

Position b 90 0 to position a Bubble still follows LEFT THUMB.
Ken Youssefi Engineering 10, SJSU 1 The Blade Shape Design groups should conduct a thorough search of the internet to obtain information on turbine rotor.

Ken Youssefi Engineering 10, SJSU 1 The Blade Shape Design groups should conduct a thorough search of the internet to obtain information on turbine rotor.
PLEASE DO NOT TOUCH THE MICROSCOPES AT YOUR DESKS!!!

PLEASE DO NOT TOUCH THE MICROSCOPES AT YOUR DESKS!!!
Created by Barbara Fugitt Vocabulary Transformations Sketches $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 Final Jeopardy.

Created by Barbara Fugitt Vocabulary Transformations Sketches $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 Final Jeopardy.
Unit 5: Geometric Transformations.

Unit 5: Geometric Transformations.
Motion Constraint Train Down the Track. Apply Angle Constraint to Workplanes Train is assembled at this point. Place a Workplane through the center of.

Motion Constraint Train Down the Track. Apply Angle Constraint to Workplanes Train is assembled at this point. Place a Workplane through the center of.
Geometry Vocabulary- transformation- the change in the size, shape, or position of a figure. translation- slide--every point in a figure moves the same.

Geometry Vocabulary- transformation- the change in the size, shape, or position of a figure. translation- slide--every point in a figure moves the same.
State estimation with fleeting data. 05/12/20152 > Plan 1.Introduction 2.Approach used: fleeting data and tubes 3.Demo 4.Conclusion.

State estimation with fleeting data. 05/12/20152 > Plan 1.Introduction 2.Approach used: fleeting data and tubes 3.Demo 4.Conclusion.
Find the Mindstorms Icon on the computer.. To start a new program click go.

Find the Mindstorms Icon on the computer.. To start a new program click go.
Answer the following questions using yesterday’s Translation Task: 1.What is a transformation? 2.What are vertices? 3.When does it mean when geometric.

Answer the following questions using yesterday’s Translation Task: 1.What is a transformation? 2.What are vertices? 3.When does it mean when geometric.
Rotation On a coordinate grid. For a Rotation, you need An angle or fraction of a turn –Eg 90° or a Quarter Turn –Eg 180° or a Half Turn A direction –Clockwise.

Rotation On a coordinate grid. For a Rotation, you need An angle or fraction of a turn –Eg 90° or a Quarter Turn –Eg 180° or a Half Turn A direction –Clockwise.
Rotations. Goals Distinguish between a translation, reflection, and rotation. Visualize, and then perform rotations using patty paper. To determine the.

Rotations. Goals Distinguish between a translation, reflection, and rotation. Visualize, and then perform rotations using patty paper. To determine the.
Design idea's BY ZION JOHNSON. What lead me to my designs?  The reason why I pick these designs. Because I thought of what we need the robot to do which.

Design idea's BY ZION JOHNSON. What lead me to my designs?  The reason why I pick these designs. Because I thought of what we need the robot to do which.
Grid Pictures Modification. Geometrical Modifications Clip – Rectangular – Other shapes Rotate – Left, Right – 180 degrees – Flip.

Grid Pictures Modification. Geometrical Modifications Clip – Rectangular – Other shapes Rotate – Left, Right – 180 degrees – Flip.
Statics. Identifying Static Situations Objects that do not move linearly (translational motion) or rotate (rotational motion) are static.

Statics. Identifying Static Situations Objects that do not move linearly (translational motion) or rotate (rotational motion) are static.

Similar presentations

Ads by Google