Presentation is loading. Please wait.

Presentation is loading. Please wait.

Crown DSi Series Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display.

Published byIsaak Bordley Modified over 9 years ago

Similar presentations

Presentation on theme: "Crown DSi Series Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display."— Presentation transcript:

1 Crown DSi Series Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display Updating Firmware Service Information Controls Wiring and Connectivity Configurations in System Architect Diagnostic Information

2 Crown DSi Series Control Welcome to the DSi Front Panel Use your mouse to navigate the front panel as if you were pressing the actual buttons

3 Crown DSi Series Control Click The Sel / Enter Button As The Amp Powers Up

4 Crown DSi Series Control Click on the Sel / Enter Button To Begin Factory Default Screen

5 Crown DSi Series Control Use The front Panel Buttons to Navigate Choose Presets Or Configuration Menu Presets Or Configuration

6 Crown DSi Series Control Preset 1 Factory Default Amplifier

7 Crown DSi Series Control View In System Architect Preset 2 JBL 3631

8 Crown DSi Series Control View In System Architect Preset 3 JBL 3631T Low Frequency

9 Crown DSi Series Control View In System Architect Preset 4 JBL 3631T Mid / Highs

10 Crown DSi Series Control View In System Architect Preset 5 JBL 3632

11 Crown DSi Series Control View In System Architect Preset 6 JBL 3632T Low Frequency

12 Crown DSi Series Control View In System Architect Preset 7 JBL 3632 Mid / Highs

13 Crown DSi Series Control View In System Architect Preset 8 JBL 4622

14 Crown DSi Series Control View In System Architect Preset 9 JBL 4632

15 Crown DSi Series Control View In System Architect Preset 10 JBL 4632T Low Frequency

16 Crown DSi Series Control View In System Architect Preset 11 JBL 4632T Mid / Highs

17 Crown DSi Series Control View In System Architect Preset 12 JBL 4675C4 Low Frequency

18 Crown DSi Series Control View In System Architect Preset 13 JBL 5674 Low Frequency 3

19 Crown DSi Series Control View In System Architect Preset 14 JBL 5674 Mid / Highs

20 Crown DSi Series Control View In System Architect Preset 15 JBL 4641

21 Crown DSi Series Control Preset 16 JBL 4642A View In System Architect

22 Crown DSi Series Control Preset 17 JBL 8330A View In System Architect

23 Crown DSi Series Control Preset 18 JBL 8340A View In System Architect

24 Crown DSi Series Control Blank Preset

25 Crown DSi Series Control Blank Preset

26 Crown DSi Series Control Configuration Menu

27 Crown DSi Series Control Stereo Input Channel 1 And Channel 2 Inputs Are Independent And Controlled By Individual Gain Controls

28 Crown DSi Series Control CH1 + CH2 Input Channel 1 And Channel 2 Inputs are Summed Together And Controlled By Channel 1 Gain Control

29 Crown DSi Series Control Input “Y” Enabled Channel 1 Input Is Paralleled to Channel 2’s Input Path And Both Are Controlled By Channel 1 Gain Control

30 Crown DSi Series Control Amplifier Crossover Off

31 Crown DSi Series Control View In System Architect Amplifier Crossover At 90 Hz

32 Crown DSi Series Control View In System Architect Amplifier Crossover At 100 Hz

33 Crown DSi Series Control View In System Architect Amplifier Crossover At 1.2kHz

34 Crown DSi Series Control View In System Architect Amplifier Crossover At 1.5kHz

35 Crown DSi Series Control View In System Architect Amplifier Crossover At 2kHz

36 Crown DSi Series Control View In System Architect Amplifier Crossover At 90 Hz Both Channels Output For Subs

37 Crown DSi Series Control View In System Architect Channel 1 EQ Enabled Enables Channel 1 EQ Created In System Architect

38 Crown DSi Series Control Channel 1 EQ Disabled Disables Channel 1 EQ Created In System Architect

39 Crown DSi Series Control View In System Architect Channel 2 EQ Enabled Enables Channel 2 EQ Created In System Architect

40 Crown DSi Series Control Channel 2 EQ Disabled Disables Channel 1 EQ Created In System Architect

41 Crown DSi Series Control Channel 1 Delay 0.0ms Channel 1 Delay In Milliseconds

42 Crown DSi Series Control Channel 1 Delay 1ms Channel 1 Delay In Milliseconds

43 Crown DSi Series Control Channel 1 Delay 2ms Channel 1 Delay In Milliseconds

44 Crown DSi Series Control Channel 1 Delay 3ms Channel 1 Delay In Milliseconds

45 Crown DSi Series Control Channel 1 Delay 4ms Channel 1 Delay In Milliseconds

46 Crown DSi Series Control Channel 1 Delay 5ms Channel 1 Delay In Milliseconds

47 Crown DSi Series Control Channel 1 Delay 6ms Channel 1 Delay In Milliseconds

48 Crown DSi Series Control Channel 1 Delay 7ms Channel 1 Delay In Milliseconds

49 Crown DSi Series Control Channel 1 Delay 8ms Channel 1 Delay In Milliseconds

50 Crown DSi Series Control Channel 1 Delay 9ms Channel 1 Delay In Milliseconds

51 Crown DSi Series Control Channel 1 Delay 10ms Channel 1 Delay In Milliseconds

52 Crown DSi Series Control Channel 1 Delay 20ms Channel 1 Delay In Milliseconds

53 Crown DSi Series Control Channel 1 Delay 30ms Channel 1 Delay In Milliseconds

54 Crown DSi Series Control Channel 1 Delay 40ms Channel 1 Delay In Milliseconds

55 Crown DSi Series Control Channel 1 Delay 50ms Channel 1 Delay In Milliseconds

56 Crown DSi Series Control Channel 1 Delay Off

57 Crown DSi Series Control Channel 2 Delay 0.0ms Channel 2 Delay In Milliseconds

58 Crown DSi Series Control Channel 2 Delay 1ms Channel 2 Delay In Milliseconds

59 Crown DSi Series Control Channel 2 Delay 2ms Channel 2 Delay In Milliseconds

60 Crown DSi Series Control Channel 2 Delay 3ms Channel 2 Delay In Milliseconds

61 Crown DSi Series Control Channel 2 Delay 4ms Channel 2 Delay In Milliseconds

62 Crown DSi Series Control Channel 2 Delay 5ms Channel 2 Delay In Milliseconds

63 Crown DSi Series Control Channel 2 Delay 6ms Channel 2 Delay In Milliseconds

64 Crown DSi Series Control Channel 2 Delay 7ms Channel 2 Delay In Milliseconds

65 Crown DSi Series Control Channel 2 Delay 8ms Channel 2 Delay In Milliseconds

66 Crown DSi Series Control Channel 2 Delay 9ms Channel 2 Delay In Milliseconds

67 Crown DSi Series Control Channel 2 Delay 10ms Channel 2 Delay In Milliseconds

68 Crown DSi Series Control Channel 2 Delay 20ms Channel 2 Delay In Milliseconds

69 Crown DSi Series Control Channel 2 Delay 30ms Channel 2 Delay In Milliseconds

70 Crown DSi Series Control Channel 2 Delay 40ms Channel 2 Delay In Milliseconds

71 Crown DSi Series Control Channel 2 Delay 50ms Channel 2 Delay In Milliseconds

72 Crown DSi Series Control Channel 2 Delay Off

73 Crown DSi Series Control Channel 1 Limiter OFF

74 Crown DSi Series Control Channel 1 Limiter -3dB Initiates A Limiter On Channel 1 At -3dB Below Clipping

75 Crown DSi Series Control Channel 1 Limiter -6dB Initiates A Limiter On Channel 1 At -6dB Below Clipping

76 Crown DSi Series Control Channel 1 Limiter -12dB Initiates A Limiter On Channel 1 At -12dB Below Clipping

77 Crown DSi Series Control Channel 2 Limiter OFF

78 Crown DSi Series Control Channel 2 Limiter -3dB Initiates A Limiter On Channel 2 At -3dB Below Clipping

79 Crown DSi Series Control Channel 2 Limiter -6dB Initiates A Limiter On Channel 2 At -6dB Below Clipping

80 Crown DSi Series Control Channel 2 Limiter -12dB Initiates A Limiter On Channel 2 At -12dB Below Clipping

81 Crown DSi Series Control Stereo Output

82 Crown DSi Series Control Bridge-Mono Output

83 Crown DSi Series Control Back 90Hz Crossover Lows On Channel 1Mid /Highs On Channel 2 Output

84 Crown DSi Series Control 100Hz Crossover Back Lows On Channel 1Mid /Highs On Channel 2 Output

85 Crown DSi Series Control 1.2KHz Crossover Back Lows On Channel 1Mid /Highs On Channel 2 Output

86 Crown DSi Series Control Back 1.5kHz Crossover Lows On Channel 1Mid /Highs On Channel 2 Output

87 Crown DSi Series Control Back 2.0kHz Crossover Lows On Channel 1Mid /Highs On Channel 2 Output

88 Crown DSi Series Control 2-Channel Subs Back Both Channel Outputs 90Hz and Below For Subs

89 Crown DSi Series Control Preset 2 JBL 3631 Back Click to View Crossover

90 Crown DSi Series Control Back Preset 2 JBL 3631 Click to View Equalization Biamped Configuration With Lows To Channel 1 And Mid-Highs To Channel 2

91 Crown DSi Series Control Preset 3 JBL 3631T-LF Back Click to View Crossover

92 Crown DSi Series Control Preset 3 JBL 3631T-LF Click to View Equalization Back Part Of Tri-amped Configuration With Amplifier In Bridge-mono For Lows

93 Crown DSi Series Control Back Preset 4 JBL 3631T-MH Part Of Tri-amped Configuration With Mids To Channel 1 And Highs To Channel 2

94 Crown DSi Series Control Back Preset 5 JBL 3632 Click to View Crossover

95 Crown DSi Series Control Back Preset 5 JBL 3632 Click to View Equalization Biamped Configuration With Lows To Channel 1 And Mid-Highs To Channel 2

96 Crown DSi Series Control Back Preset 6 JBL 3632T-LF Click to View Crossover

97 Crown DSi Series Control Back Preset 6 JBL 3632T-LF Click to View Equalization Part Of Tri-amped Configuration With Amplifier In Bridge-mono For Lows

98 Crown DSi Series Control Back Preset 7 JBL 3632T- MH Click to View Crossover

99 Crown DSi Series Control Back Preset 7 JBL 3632T-MH Click to View Equalization Part Of Tri-amped Configuration With Mids To Channel 1 And Highs To Channel 2

100 Crown DSi Series Control Back Preset 8 JBL 4622 Click to View Crossover

101 Crown DSi Series Control Back Preset 8 JBL 4622 Click to View Equalization Biamped Configuration With Lows To Channel 1 And Mid-Highs To Channel 2

102 Crown DSi Series Control Back Preset 9 JBL 4632 Click to View Crossover

103 Crown DSi Series Control Back Preset 9 JBL 4632 Click to View Equalization Biamped Configuration With Lows To Channel 1 And Mid-Highs To Channel 2

104 Crown DSi Series Control Back Preset 10 JBL 4632T-LF Click to View Crossover

105 Crown DSi Series Control Back Preset 10 JBL 4632T-LF Click to View Equalization Part Of Tri-amped Configuration With Amplifier In Bridge-mono For Lows

106 Crown DSi Series Control Back Preset 11 JBL 4632T--MH Click to View Crossover

107 Crown DSi Series Control Back Preset 11 JBL 4632T--MH Click to View Equalization Part Of Tri-amped Configuration With Mids To Channel 1 And Highs To Channel 2

108 Crown DSi Series Control Back Preset 12 JBL 4675C4 LF Click to View Crossover

109 Crown DSi Series Control Back Preset 12 JBL 4675C4 LF Click to View Equalization Biamped Configuration With Lows To Channel 1 And Mid-Highs To Channel 2

110 Crown DSi Series Control Back Preset 13 JBL 5674--LF Part Of Tri-amped Configuration With Amplifier In Bridge-mono For Lows

111 Crown DSi Series Control Back Preset 14 JBL 5674--MH Part Of Tri-amped Configuration With Mids To Channel 1 And Highs To Channel 2

112 Crown DSi Series Control Back Preset 15 JBL 4641 Amplifier Is Configured In Bridge-Mono For Subwoofer

113 Crown DSi Series Control Back Preset 16 JBL 4642A Amplifier Is Configured In Bridge-Mono For Subwoofer

114 Crown DSi Series Control Back Preset 17 JBL 8330A Amplifier Is Configured For full Range Surround Speakers

115 Crown DSi Series Control Back Preset 18 JBL 8340A Amplifier Is Configured For full Range Surround Speakers

116 Crown DSi Series Control Screenshot Of EQ Setup In System Architect Back EQ Programmed in System Architect

117 Crown DSi Series Control Back Screenshot Of EQ Setup In System Architect EQ Programmed in System Architect

118 Crown DSi Series Control DSi 8M Monitor Monitor Speaker Volume Control Processor Amplifier Selector VU Bar Graph Test Jack Internal SpeakerPower Switch Channel Select Buttons DSi 8M Monitor Front Panel Controls And Indicators

119 Crown DSi Series Control Updating Firmware In System Architect If a newer version of firmware exists, System Architect will ask if you want to update the firmware.

120 Crown DSi Series Control Updating Firmware In System Architect Check the appropriate update box and then click the “Begin Update” box.

121 Crown DSi Series Control After the firmware is updated, you can chose to send the previous settings back to the amplifier or receive the settings from the amplifier which will leave the amplifier back at factory defaults Updating Firmware In System Architect

122 Crown DSi Series Control Service Information In the event that your amplifier should require service, a Service Return Authorization (SRA) is required for product being sent to the factory for service. You can create the SRA by going to www.crownaudio.com/support/factserv.htm. www.crownaudio.com/support/factserv.htm If you do not have access to our website, call 1-800-342-6939, extension 8205 and we’ll create the SRA for you.

123 Crown DSi Series Control Signal Flow In System Architect

124 Crown DSi Series Control Input & Output In System Architect Choose Input Setup Or Test System With Onboard Pink Noise Generator Select Dual Or Bridge-Mono Output

125 Crown DSi Series Control EQ In System Architect Sample EQ From JBL 4632 Input and Output EQ

126 Crown DSi Series Control Crossovers In System Architect View of 225Hz Crossover

127 Crown DSi Series Control Delay & Limiters In System Architect Select Up To 50ms Of Delay Selectable Clip Limiting

128 Crown DSi Series Control Select & Store Presets In System Architect Select 17 Presets Designed For JBL Cinema Speakers Or Create And Save User Defined Presets

129 Crown DSi Series Control Input And Output Wiring Dual Output Wiring Bridge-Mono Output Wiring DSi Terminal Block Output Wiring

130 Crown DSi Series Control Input / Output Wiring Basic Dual Output Wiring Basic Bridge-Mono Wiring DSi 8M

131 Crown DSi Series Control Input And Output Wiring Phoenix Input Connector Balanced And Unbalanced Wiring Balanced And Unbalanced Input Connections RCA to Phoenix Connector DB-25 Pin outs For DSi 8M Monitor

132 Crown DSi Series Control Front Panel Controls & Indicators Power Switch Blue Power LED Detented Rotary Gain Controls Backlit LCD Display Display Navigation controls Meter LEDs Indicates Amplifier Is Ready To Pass Audio Signal Will Flash With Audio Flashes When Output Exceeds -20dB Below Clip Flashes When Output Exceeds -10dB Below Clip Turns On At Onset Of Audible Distortion Turns on Under Extreme Thermal Conditions

133 Crown DSi Series Control Back Panel Connections Removable IEC Power Connector Dual Neutrik Speakon Output Connectors Type B USB Connector For Use With HiQnet System Architect Variable Speed Front to Rear Airflow Two 3-pin detachable Phoenix-type connectors each accept a balanced line-level input signal HD-15 Connector for cinema I/O compatibility with DSi- 8M System Monitor

134 Crown DSi Series Control HiQnet Software http://hiqnet.harmanpro.com/ Follow this Link To Download The Most Current Version of System Architect

135 Crown DSi Series Control Connect To Speaker Channel Outputs Removable IEC Power Connector 3 10-Pin Phoenix Output Connectors 6 HD-15 Connectors To Connect Directly to DSi Amplifiers Main Input From Processor Adjust Input from Cinema Processor Adjust Bar Graph Sensitivity Adjust Levels From Amplifier Outputs Optional Input Connector Emergency AC Power Input “EX” Selector DSi 8M Monitor Back Panel

136 Crown DSi Series Control Typical Cinema Wiring Input And Output Wiring Left Center Right Subwoofer Left / Right Surrounds Back Left / Right Surrounds

137 Crown DSi Series Control

138 Amplifier Status Screens Hold In the 3 Front Panel Buttons While Powering Up Amplifier. Screen Will Say “Press Me" and Fan Will Turn On High. Pressing Each Button Will Display Each Button’s Function.

139 Crown DSi Series Control Amplifier Status Screens

140 Crown DSi Series Control Press The 3 Control Buttons Simultaneously While the Amplifier Is On And Use The Next and Previous buttons to Scroll Through The Status Screens Channel 1 & 2 Heat Sink Temperature Amplifier Status Screens

141 Crown DSi Series Control Amplifier Firmware Version & System Architect Address Amplifier Status Screens

142 Crown DSi Series Control Power Supply Temperature Amplifier Status Screens

143 Crown DSi Series Control Programmable Fan Modes In Hi mode the fan will turn on at 53C In LO mode, the fan will turn on at 33C In Fan On mode, the fan is always on high Amplifier Status Screens

144 Crown DSi Series Control In XTi, CDi, and DSi amplifiers, the fan will turn on in “Fan Hi” mode when the internal heat sink temperature reaches 53C. To change the fan mode, the “Next” button is held down at start up. A more sensitive “Fan Lo” will be initiated. The fan will turn on at 33C and off at 23C. To disable it, hold down the “Next” button at start up and the fan will return to normal. To change to “Fan On” mode, hold down the “Sel” button at start up and the fan will stay on high continuously. To disable it, hold down the “Sel” at start up and the fan will return to normal. Amplifier Status Screens

Download ppt "Crown DSi Series Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display."

Similar presentations

Crown XTi Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display Updating.

Crown XTi Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display Updating.
AD-340 Universal Audio Delay Processor Compatible with Analog and a wide range of Digital Audio formats SPDIF (digital audio) input and output and Stereo.

AD-340 Universal Audio Delay Processor Compatible with Analog and a wide range of Digital Audio formats SPDIF (digital audio) input and output and Stereo.
Triad DSP RackAmps™ Set Up

Triad DSP RackAmps™ Set Up
Crown CDi Series Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display.

Crown CDi Series Control Click the Crown Logo at the top of any the screen to return to this Menu Interactive Main Menu Interactive Front Panel Display.
CommentaryVideo Hi, my name is Edward Guillergan and I’m one of AMETEK Programmable Power’s Applications Engineers. I’m here to provide an overview of.

CommentaryVideo Hi, my name is Edward Guillergan and I’m one of AMETEK Programmable Power’s Applications Engineers. I’m here to provide an overview of.
JED Microprocessors Pty Ltd Presenting the JED T430 low-cost Projector Controllers Nov 22nd, 2009.

JED Microprocessors Pty Ltd Presenting the JED T430 low-cost Projector Controllers Nov 22nd, 2009.
…performance audio networks. ABOUT RockNet => RockNet provides ultra low latency and very high audio quality. Genuine Audio Technology  RockNet is a.

…performance audio networks. ABOUT RockNet => RockNet provides ultra low latency and very high audio quality. Genuine Audio Technology  RockNet is a.
PSI-5120 / 5240. New Products for 2007… PSI-5120/5240 Digital PA Combination System.

PSI-5120 / New Products for 2007… PSI-5120/5240 Digital PA Combination System.
PC CMD V2 Enhancement and New Firmware

PC CMD V2 Enhancement and New Firmware
GE job title/1 GE internal information - Not for external distribution 1 GE Security EMEA NPI template – v1 1X Series (phase 1) Conventional Fire Panel.

GE job title/1 GE internal information - Not for external distribution 1 GE Security EMEA NPI template – v1 1X Series (phase 1) Conventional Fire Panel.
Audio Signal Flow By Jodi Kidneigh Week 1 IMPMOOC.

Audio Signal Flow By Jodi Kidneigh Week 1 IMPMOOC.
D-901 Digital Mixer.  Rack-mount digital mixer  Modular design — up to 12 inputs and 8 outputs  Installed sound applications such as audio/visual,

D-901 Digital Mixer.  Rack-mount digital mixer  Modular design — up to 12 inputs and 8 outputs  Installed sound applications such as audio/visual,
① The output signal of a room thermostat is ON or OFF according to changes of room temperature ② The power supply to a motorized valve is ON or OFF according.

① The output signal of a room thermostat is ON or OFF according to changes of room temperature ② The power supply to a motorized valve is ON or OFF according.
DAP-1520 FAQ’s Wireless AC750 Dual Band Range Extender.

DAP-1520 FAQ’s Wireless AC750 Dual Band Range Extender.
1 Check all equipment is included before returning. If you have an accident or the equipment is damaged or you need support please contact Blaize. 01943.

1 Check all equipment is included before returning. If you have an accident or the equipment is damaged or you need support please contact Blaize
MH 201, 203, 205 Classroom Technology University of Dayton Information Technology Classroom Support.

MH 201, 203, 205 Classroom Technology University of Dayton Information Technology Classroom Support.
Projector Controllers

Projector Controllers
Mixing Consoles Designations Inputs Outputs Signal processing.

Mixing Consoles Designations Inputs Outputs Signal processing.
Audio Production Console Huber, Ch. 11. Three Stages of Multitrack Recording Recording (Tracking) Overdubbing Mixdown.

Audio Production Console Huber, Ch. 11. Three Stages of Multitrack Recording Recording (Tracking) Overdubbing Mixdown.
An instrument to glorify God! Channel Strip Trim Control The Trim control sets the gain of the input amplifier for the MIC and Line inputs. Proper setting.

An instrument to glorify God! Channel Strip Trim Control The Trim control sets the gain of the input amplifier for the MIC and Line inputs. Proper setting.

Similar presentations

Ads by Google