2. PGS Introduction "Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio). "Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs. "Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers. "Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling. "Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX). Red

3. Design Concept Aerocool is proud to announce our first Mid-Tower case (Model : Rs-9 Devil Red) under the PGS-R series (Professional Series – Red Label). Rs-9 Devil Red is one of the best “Mid-Tower” case in the market today. This case is not only elegantly designed and solidly constructed; it also delivers high performance, expandability, protection and cooling. The "ALL BLACK" chassis (both internal and external) with Black/Red screw- less clips, fans and PCI-cover give this chassis a GREAT look. The Rs-9 Devil Red is designed with “User-Friendly” concept in mind and it gives gamers great expandability and protection for their Hard Drives. Its “Screw-less” chassis and Pre-drilled holes on the motherboard plate for cable routing make this chassis an easy install. This chassis also offers great expansion capabilities. It can support 9 x 5 1/4” devices, 3 x 3.5" HDDs (internal) and 1 x 3.5" external device such as a Floppy drive or a Card Reader. Your Hard Drives are well protected from shock with the “anti-vibration” rubbers. The Rs-9 Devil Red case also delivers optimal air flow and supports Longer High-End VGA cards up to 295mm. Your system will be cooled by 6 x 12/14cm fans (1 x12cm fan in front, 1 x 12cm fan in the rear, 2 x 12/14cm fans on top and 2 x 12cm fans on the side panel). These fans can be controlled by a "3-Mode" LED fan controller (Low speed, Medium Speed and High Speed).

4. Gallery FrontBack Side Photos are for exterior reference only. Not all fans are inclusive. Please see specification page. Top

5. Features - High performance "Mid-Tower" for gamers and enthusiast - Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese Steel and beautifully finished ALL BLACK interior - High-end Graphic card Support - Supports longer high-end VGA cards up to 295mm - High Expandability - Supports 9 x 5 1/4" bays, 3 x 3.5" HDDs (internal) and 1 x 3.5" external devices such as Floppy or a Card Reader. - HDD Protection - Includes anti-vibration rubbers to protect your HDDs from shock. - Ease of Installation – New "Easy-install" screw-less kits are included for the 5 1/4" devices. - Easy Access Top I/O ports - 2 x USBs, Audio/Mic and E-Sata ports - Smart Cable Management – Cable routing is pre-drilled on the MB so users can hide cables behind the MB tray. - Dust Protection - Includes front, bottom and top "Dust Filter" to prevent dust entering your computer - Mesh PCI cover - Includes Red metal mesh PCI covers for better ventilation - RED LED fan controller - 3 "Mode" (Low, Medium and High) RED LED fan controller is included to control up to 20 Watts of power. - Bottom PSU position - the bottom PSU location enables PSUs to suck in cold air and provides better air flow for your system. - Water-cooling Support - water-cooling holes are pre-drilled to support water-cooling systems!!

6. Specifications Spec Cooling System Chassis Dimensions Material Motherboards 5.25" bay (External) 3.25" bay (External) 3 x 3.5” HDDs Expansion Slots Max length space available for PCI slots I / O Ports Fan Rated voltage Starting voltage Power consumption Rated current Speed Air Flow (CFM) Air pressure Noise (dBA) Bearing :::::::::::::::::: :::::::::::::::::::: 443(H) x 200(W) x 476(D) SECC 0.6mm ATX / Micro ATX 9 x 5.25" (External) 1 x 3.5" (Convert from 5.25”) 3 x 3.5” HDDs (Internal)(w/adaptors) 7 Slots 295 mm 2 x USB2.0 / e-SATA / Mic & headphone (AC97 & HD audio) 120 x 120 x 25mm 12V ≤ 9V(Power ON/OFF) 2.64W 0.22A 1500 RPM +- 10% 58.35 CFM (Max) 2.1mm H2O 26.67 dB-A Sleeve 120 x 120 x 25mm 12V ≤ 9V(Power ON/OFF) 2.64W 0.22A 1500 RPM +- 10% 58.35 CFM (Max) 2.1mm H2O 26.67 dB-A Sleeve FrontRear

7. Air Flow Superb Airflow - install up to 6 x 12/14 cm fans !!! 1. Front - 1 x 12cm fan (1 x 12cm RED LED fan included) 2. Back - 1 x 12cm fan (1 x 12cm RED LED fan included) 3. Side - 2 x 12/14cm fans (optional) 4. Top - 2 x 12/14cm fans (optional)

8. Inside Dual fans on top panel to extract heat from chassis Pre-drill pipe holes for water cooling w/meshed PCI slot Cables are neatly tugged behind the chassis Filter included to prevent dust from entering PSU Tool-free for 5.25” bay HDDs can be mounted with adaptors provided Provide easy access to CPU cooler’s back plate 5.25” > 3.5” adaptor for FDD Adaptors are equipped with anti-vibration rings 295mm Sufficient depth of chassis for installing long cards

9. Close Up

10. Low – 50% of max speed Power Reset Medium – 80% of max speed High – full speed Fan Control