1. How to Use the Microphone System It’s as Simple as 0, 1, 2, 3!

2. The Microphone System 2 This is what the microphone system looks like

3. The Microphone System The microphone system is separate from the A/V equipment on the cart 3

4. The Microphone System 4 This is where to plug in the system

5. The Microphone System 5 This is the speaker

6. The Microphone System 6 This is the system control box

7. The Microphone System 7 Please don’t open the system control box!

8. The Microphone System 8 The system power switch is found at the rear of the base

9. The Microphone System 9 These are the microphon e channel boxes

10. The Microphone System 10 This blue plastic box holds the other system components

11. What’s in the Blue Box 11 In the blue box you will find the microphones, spare batteries, etc.

12. What’s in the Blue Box 12 There are two cordless handheld microphones

13. What’s in the Blue Box 13 And one cordless headset microphone

14. Other Things in the Blue Box 14 Spare batteries Sanitary wipes System instructions Optional stand

15. How to Get the System Going STEP 0: Plug in the system STEP 1: Turn on the system STEP 2: Turn on the channels STEP 3: Turn on the microphones 15

16. How to Get the System Going STEP 0: Plug in the system STEP 1: Turn on the system STEP 2: Turn on the channels STEP 3: Turn on the microphones 16 You can usually skip STEPS 1 and 2

17. 0 STEP 0: Plug in the System If the system is not plugged in, plug it in 17

18. STEP 1: Turn on the System 18 Check the system light at the rear of the base

19. STEP 1: Turn on the System If the light at the rear of the base is not on 19

20. STEP 1: Turn on the System 20 Press the power switch located next to the number 1

21. STEP 2: Turn on the Channels 21 Check the lights on the three microphone channel boxes 2 2 2

22. STEP 2: Turn on the Channels 2 22 If the light on a channel box is not on

23. STEP 2: Turn on the Channels 2 23 Press the switch located here

24. STEP 3: Turn on the Mics 24 Find the two pouches holding cordless handheld microphones

25. STEP 3: Turn on the Mics 25 Remove the contents of the pouch

26. STEP 3: Turn on the Mics 26 Open the battery compartment by pulling here on the side of the cover

27. STEP 3: Turn on the Mics 27 Instead of pulling on this clip here

28. STEP 3: Turn on the Mics 28 Insert the batteries

29. STEP 3: Turn on the Mics 29 Make sure they are pointing in the right direction

30. STEP 3: Turn on the Mics Close the battery cover and screw on the base 30

31. STEP 3: Turn on the Mics Turn on the microphone by holding down the recessed button for a few seconds 31

32. STEP 3: Turn on the Mics 32 The microphone comes on, indicating remaining battery life (5 hours 20 minutes in this instance)

33. STEP 3: Turn on the Mics To use the microphone, hold it close to the mouth and speak directly into it 33

34. STEP 3: Turn on the Mics Remove the headset microphone from its pouch 34

35. STEP 3: Turn on the Mics 35 Turn on the headset control

36. STEP 3: Turn on the Mics 36 This light will come on

37. STEP 3: Turn on the Mics Loop the headset over the facilitator or presenter’s ears 37

38. STEP 3: Turn on the Mics 38 Make sure the microphone is close enough to the mouth

39. STEP 3: Turn on the Mics Clip the headset control on your belt or put it in a pocket 39

40. ●Remove batteries from handheld micro- phones, putting everything in the pouches ●Turn off the headset microphone and return it with its control to the pouch ●Return the pouches in the blue box ●Unplug the system (no need to turn off the system or the channel boxes) At the End of the Day 40