1. Training DVDR610VR Combi DVDR and Videorecorder. Euroservice Service Training Theo Heijnen April 2004

2. Philips CE Europe, Euroservice, TTS2004A DVDR600VR Slide Block Diagram Digital Board (from Philips) -DVD playback/rec -Video ADC/DAC -Tuner control Analog board 2003 (from Philips) -input selection -Output selection -Tuner -Audio ADC/DAC -Bridge to VCR in the SIO uP (use Debug interface ) -IIC port expander Clock/timer control/fan control VFT 2003 + DD (DVD+RW) RC input VCR (from Funai) -playback.rec -VCR control -Sys. Power control -Output control PSU Signal in/out FTD (VCR) + Keys + RC input Combi board In/out UART IIC Add keys SIO Remark: need to adapt uP sub Note:RC input is sent to both DVD and VCR uP

3. Philips CE Europe, Euroservice, TTS2004A DVDR600VR Slide Disc record while VCR PB and vice versa VCR DVD+RW OSD TV Tuner External Sources REC Pb Signal Flow Today´s DVD+RW YUV, S- Video, RGB Inhibit in simultaneous modes CVBS/ RF Mod DV IN Simultaneous VCR Playback, DVD Rec Normal mode Normal mode Inhibit video input / YUV input Dubbing Attention inhibit OSD

4. Philips CE Europe, Euroservice, TTS2004A DVDR600VR Slide Key Component Digital PCB from Philips Loader POS AV3 -> AV3.5 FTD (Futaba BJ944GN) for DVDRW – same connection as per Philips DVDR75 ANA uP based on TMP91CW12AF (Toshiba) + external 1M Flash TV Tuner (Samsung TCM0682) as per Philips DVDR75 PSU from Funai FTD for VCR from Funai VCR module from Funai