1. Bemalastic 1213 Bridge Deck Membrane
Bridge Deck Waterproofing

2. Bridge Preparation

3. After sandblasting, Waterproofing primer applied

4. Which system one ply/two ply
One ply is generally used on MTO bridges in Ontario. The application is 5 mm thick Bemalastic 1213 and MTO approved 1/8 inch Protection Board.
Two Ply is generally used on the Superelevated bridges and in Toronto where the fabric reinforcement Reemay is sandwiched between two layers of Bemalastic 1213 approximately 2.5 mm thick each. Then the hot material layer is covered with protection board as above.

5. Typical Single Ply Application

6. Bemalastic 1213 applied 5 mm thick on the deck

7. Protection Board being applied into the hot rubber

8. Ready to pave

10. Typical 2 ply system application

15. Other Waterproofing