Download presentation
Presentation is loading. Please wait.
Published bySabastian Hardin Modified over 9 years ago
1
Standard Knots www.idbsa.org
2
Objectives LL earn how to tie and what are the functions of the following knots. –T–Thumb knot –F–Figure-of-8 knot –R–Reef Knot –S–Sheet Bend –S–Sheepshank –C–Clove Hitch –M–Marlinspike –T–Timber Hitch –R–Round turn 2 half hitch
3
Caring For Rope AA good rope is expensive and should not be handled carelessly. KK eep it clean and free of mud or grease. If it is damp, do not coil or store it until it is thoroughly dried out. AA lways keep it in a dry place. It should never be thrown into a corner to tangle and kink. WW hen a job is finished, the rope should be placed where it will be available instantly, if necessary, and should be coiled so that it will pay out smoothly when needed.
4
Thumb Knot AA stopper knot for THICK ropes
5
Figure-Of-8 Knot AA stopper knot for THIN ropes
6
Reef Knot TT o tie together 2 ropes of the SAME THICKNESS.
7
Sheet Bend TT o tie together 2 ropes of the DIFFERENT THICKNESS.
8
Sheepshank TT o shortened a rope which is fastened at both ends.
9
Clove Hitch TT o tie a rope to a pole –S–Start a lashing
10
Marlinspike TT o make a ladder AA lso used to make a loop in the guideline when building flagpole.
11
Timber Hitch TT o tie a rope to a log and drag it.
12
Round Turn 2 Half Hitch TT o tie a rope to a tree trunk when you want to prevent something from escaping on the other end of the rope.
13
The End
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.