1. Presented by: John Cole General Manager, CICB 1926.1401 – Definitions 1926.1413 – Crane Inspections 1926.1414 – Wire Rope Selection and Inspection Criteria 1926.1415 – Safety Devices 1926.1416 – Operation Aids 1926.1429 – Qualifications of Maintenance and Repair Personnel 1926.1434 – Equipment Modifications www.cicb.com johncole@cicb.com OSHA 1926.1400 (800) 327-1386

2.  Builder  Certified Welder  Competent Person www.cicb.com

3.  Controlling Enti ty  Dismantling  Equipment criteria www.cicb.com

4.  Qualified person  Unavailable procedures  Wire rope www.cicb.com

5.  Repaired Adjusted Equipment  Modified Equipment  Post-assembly www.cicb.com

6.  Each Shift  Monthly  Annual/comprehensive www.cicb.com

7.  Equipment not in regular use  Manufacturer’s procedures  Documentation www.cicb.com

8.  Shift Inspection  Who conducts the inspection  What is inspected www.cicb.com

9.  Monthly Wire Rope Inspections  Annual Wire Rope Inspections www.cicb.com

11.  Wire Rope Design Criteria  Wire Rope used in Boom Hoists www.cicb.com

12.  Rotation Resistant Rope Design Criteria  Diameter for Hoist Sheaves  Criteria for Dead Ending Wire Rope www.cicb.com

13.  Crane Level Indicator  Boom Stops  Jib Stops www.cicb.com

14.  Horns  Foot Pedals  Outrigger Jacks and Stabilizers www.cicb.com

15.  Boom & Luffing Jib Limiting Devices  Anti-two Blocking Device  Boom Angle or Radius Indicator www.cicb.com

16.  Jib Angle Indicator  Load Weighing and Similar Devices  Outrigger / Stabilizer position sensor/monitor www.cicb.com

17.  Requirements for Maintenance and Repair Personnel  Must Meet the requirements of a qualified person when operating a crane in the performance of their tasks www.cicb.com

18.  Modifications that affect the capacity of safe operations  Procedure to follow www.cicb.com

19.  Procedures to follow in the event of manufacture's refusal  Procedures to follow in the event procedures are unavailable  Military modifications www.cicb.com