1. Please click on our logo or any link in this presentation to be redirected to our website & email. Thank You! 17A Marlen Drive  H amilton, NJ 08691  U SA Tel: (609) 586-8004  F ax: (609) 586-0002 www.ippe.com

2. Paper Making Line Overview Overview Summary:  124” Trim Fourdrinier Paper Machine with Rotoformer  Rebuilt in 2001 at a cost of $30,000,000.00+ USD for upgrades  The entire Wet End is all stainless steel and new in 2001  Basis Weight Range: 28-220 lbs/3,000 sq. ft. (45-355 GSM) This machine was designed to produce a wide range of paper, board and specialty products. The machine is available with or without the Rotoformer. Complete engineering documentation is available on site. This mill is immediately available.

3. Paper Making Line Equipment Stock Preparation:  3 Hydrapulpers  Stainless Steel Drum Thickener  BC Hydraflaker  (2) Valmet/Metso Optifiner MdI RF-1 Refiners (2001)  (1) BC Refiner Chemifiner MdI D-50  Voith Sulzer Multiscreen Stainless Steel (2001)  GL & V Cleaner MdI CLP-700-LD (2001) (Some other Stock Prep items have been removed for other ongoing operations)

4. Paper Making Line Equipment Forming Section (2001):  GL&V Cantilever Fourdrinier with 41’ Formation Table  (6) Foil Forming Boards  (3) Vacuum Foil Boxes  (4) Gravity Forming Boxes  24” diameter, Dandy Roll  (4) Vacuum Flat Boxes  139” x 24” diameter, Suction Couch Roll DF, 150” overall length  Voith Wire Shake control  Sandy Hill Top Rotoformer 2000, Stainless Steel, located over Wet Felt Presses  Sheets meet at the felt going into the first press

5. Paper Making Line Equipment Headbox:  Mecfab, All Stainless Steel, Hydraulic, Dilution Controlled (2001)  134” Slice Opening  (24) Auto-Actuators

6. Paper Making Line Equipment Wet Presses (2001):  (3) Individual felted wet presses  1 st Press: 24” diameter, Suction Couch Roll DF, 150” overall length  2 nd Press: Blind Drill Bottom Roll with a bone hard top roll doctored  3 rd Press: Solid Bottom Roll with a blind drill top roll doctored (Entire wet end New in 2001)

7. Paper Making Line Equipment Dryer Section (2001):  Forty-one (41) ASME Code Dryers for 75 PSI  3 Sections- 1 st (8); 2 nd (23); 3 rd (10)  134” x 48” diameter Dryer Cans with rope rings  Anti-Friction Bearings  JHK Systems, Inc. Dryer Hood with individual pocket ventilation system (2001)

8. Paper Making Line Equipment Size Press:  Inclined unit flooded nip, (1) Steel and (1) Rubber roll  Located between 3 rd and 4 th dryer sections  Latex/Coatings is applied to the sheet at this size press Overhead Dryer:  Spooner Flotation Gas Fired Dryer (2001)  Located in between 2 nd and 3 rd Dryer Section

9. Paper Making Line Equipment Calender Stacks:  Manchester 6 roll open frame Wet Calender Stack  Farell 2-roll 1000 PLI Finishing Stack, swimming bottom roll (Rebuilt 2001) Track Reel:  Beloit horizontal 6’ long Track Reel. Primary and secondary arms

10. Paper Making Line Equipment Slitter-Rewinder Rebuilt (2001):  Beloit Two-Drum Slitter-Rewinder Shaftless Rewind for 72” O.D. Rolls Tidland MSP Modular  Automatic Shear Slitting System Rated for 4000 FPM Roll Unloading Table

11. Paper Making Line Equipment Drive & Control Systems (2001):  Complete ABB AC Sectional Drive  Circonix Process Management and Control System  Honeywell Proflow Controller Process Equipment:  Complete Latex/Coatings Processing System including bulk storage tanks  Installed in 2001

12. Block Diagram

13. MICHAEL JOACHIM DIRECTOR, PLANTS DEPT. Tele: 609-838-5930 (direct) Mobile: 609-516-9107 MichaelJ@ippe.com SANJEEV REGE VP GLOBAL PLANT SALES Tele: 609-838-5938 (direct) Mobile: 609-510-2616 SanjeevR@ippe.com Contact Information: Visit us at www.ippe.com Visit us at www.ippe.com