1. Potential Energy, Energy Density Capacitance, Polarization Boundary Conditions

2. Potential Energy The electric field and potential energy are directly related: As a test charge +q moves in the direction that the field opposed it, its potential energy increases. The electrostatic potential energy is the energy of an electrically charged particle (at rest) in an electric field. The energy difference between two potentials is given by U = q(V 2 – V ref ) Joules (VAs)

3. Example Test Charge +q Charge Q Potential V = kQ R Potential Energy U = +qV R V( ∞→ R) =V ref = 0

4. Observations The potential at infinity is zero A positive test charge +q gains potential as it gets closer to the charge +Q A negative test charge –q loses potential as it gets closer to the charge +Q.

5. Cathode Ray Tube The CRT is a vacuum tube containing an electron gun (a source of electrons) and a fluorescent screen used to create images in the form of light emitted from the fluorescent screen. The image may represent electrical waveforms (oscilloscope), pictures (television, computer monitor), radar targets and others.

6. CRT Simplified Set Up Once the electrons leave the cathode, they accelerate toward the grid. Electrons entering the deflecting plate region and change directions depending on the voltage between the plates.

7. Exercise An electron moves at a constant velocity v = v o a x. Assume that the electron enters in a field E = - 1 a z (V/m) at x =0. Compute the potential energy U the electron loses as it moves from A (at z = 0 cm) to B (at z = 0.5 cm). Recall e = 1.602 x 10 – 19 As.

8. Energy Stored in an E Field Using Gauss’ Law in differential form and the Divergence theorem and it can be shown that the energy density or energy per unit volume (J/m 3 ) of the electric field is: u = ½ є |E| 2 (Joules/m 3 ) The total energy stored in the electrostatic field is U = ∭ u dV(Joules) where dV is the volume differential.

9. Example Let E = 9 V/mm in between the plates. Suppose that the area A = 1 cm 2 and the dielectric thickness is d = 1 mm. Find the energy stored by the capacitor for a relative permittivity of 2.8. Neglect (field) fringing effects. Notice that the field is constant Calculate the energy density Calculate the volume between the capacitor plates

10. Exercise Calculate the energy stored in the field produced by a metal sphere of radius a holding a charge Q. Determine the electric field E Find the energy density u Set up the integral for U Integrate over space a<R< ∞

11. Capacitance As shown above a capacitor consists of two conductors separated by a non-conductive region. The non-conductive substance is called the dielectric medium. The conductors contain equal and opposite charges on their facing surfaces, and the dielectric contains an electric field. A capacitor is assumed to be self-contained and isolated, with no net electric charge and no influence from an external electric field.

12. Capacitance An ideal capacitor is wholly characterized by its capacitance C (in Farads), defined as the ratio of charge ±Q on each conductor to the voltage V between them C = Q/V More generally, the capacitance is defined in terms of incremental changes C = dq/dv

13. Parallel Plate Capacitor From Gauss’ Law the charge and the electric field between the plates is related by Likewise, the line integral relating the potential and the electric field simplifies to Thus the capacitance is given by

14. Exercise Consider a parallel plate capacitor. Derive an expression for the stored energy U in terms of the capacitance C and the potential V.

15. Polarization Suppose that a capacitor is charged up by connecting it to a voltage source V which is then removed. A fixed charge Q is placed on its upper plate and –Q on the lower plate. Suppose the capacitor is air filled. In this case, The capacitance is

16. Polarization Next assume that the capacitor is filled with dielectric material as illustrated here. Since the charge does not change, the electric flux D is the same as before. However, the electric field E changes to

17. Polarization The decrease of E is said to be due to the polarization P of the dielectric molecules which opposes E: But the capacitance increases to

18. Exercise The relative permittivity of air is 1.0 and that of quartz is about 4.5. Calculate the difference in capacitance for two capacitors with identical geometry using these two dielectric materials.

19. Electric Boundary Conditions On a perfect conductor The component of E parallel to the conducting surface is zero The component of D normal to the conducting surface is numerically equal to the charge density On a perfect dielectric material The component of E parallel to the interface is continuous The component of D normal to the interface is continuous

20. Perfect Dielectric Medium WATER DROPPLET Medium 1 (air) Medium 2 Tangential components of E are continuous E 1t = E 2t

21. Perfect Dielectric Medium WATER DROPPLET Medium 1 (air) Medium 2 Normal components of E are discontinuous ε 1 E 1n = ε 2 E 2n no free charges

22. Perfect Conductor Medium WATER DROPPLET Medium 1 (air) Medium 2 Tangential components of E are zero E 1t = E 2t = 0 Short circuit X

23. Perfect Conductor Medium WATER DROPPLET Medium 1 (air) Medium 2 Normal components of E are discontinuous E 1n ≠ 0 E 2n = 0

24. Examples of Field Lines

25. Exercise Consider a dielectric interface at z = constant. Let є r1 = 2, є r2 = 5, and E 1 = 2a x + 3a y + 5a z Find E 2 є r2 = 5 є r1 = 2

26. Homework Read textbook sections 4-8, 4-9, 4-10, 4-11 Solve problems 4.43, 4.45, 4.50, 4.51, 4.52, 4.54