Presentation is loading. Please wait.

Presentation is loading. Please wait.

Matthew Daigle Robert Hunter Kendra Kreider Advisor: Richard Messner

Similar presentations


Presentation on theme: "Matthew Daigle Robert Hunter Kendra Kreider Advisor: Richard Messner"— Presentation transcript:

1 Matthew Daigle Robert Hunter Kendra Kreider Advisor: Richard Messner
Audio Visual LED Cube Matthew Daigle Robert Hunter Kendra Kreider Advisor: Richard Messner Kendra

2 Overview Problem Definition Design Objectives Block Diagram Design
Testing & Programming Goals Budget Project Timeline Kendra

3 Problem Definition 3-D cube of LEDs Audio/visual effects in real time
Completed within budget Presented at URC in April Kendra

4 Design Objectives Build cube of LEDs Program LEDs
8x8x8 single color LEDs or 5x5x5 RGB LEDs Program LEDs To light up in different patterns To change in sync with music playing Control with computer Kendra

5 Block Diagram BOBBY!!!!

6 Design Goal: 8x8x8 single color LED or 5x5x5 RGB LED
Start with 3x3x3 single color LED cube Experimentation Learn how to use Arduino microcontroller Work on light and music programming Mimic expected design for second cube to become familiar with final circuit on a smaller scale Bobby

7 Enabling LEDs Design does not allow for LEDs in separate columns to light simultaneously Flash LEDs faster that human eye can detect (persistence of vision) Bobby

8 Anode & Cathode Mapping
Bobby

9 Building Solder Cube Construct LED driver circuitry Wooden base
Check solder points before adding next layer Construct LED driver circuitry Wooden base LED Casing Matt

10 Testing & Programming Major part of project
Testing- results will not be qualitative Programming Get acquainted with Arduino software Lighting- patterns Music- spectrum analysis Matt

11 Goals Size 3 single color cube Size 8 single color or size 5 RGB cube
Effective light and music synchronization Programming development has no definitive end Dependent on time and knowledge of Arduino software Matt

12 Budget Parts Cost Arduino Mega 2560 Microcontroller $65
RGB LEDs or Single Color LEDs $80 Plexiglass for casing $30 Decoders (2-to-4 & 3-to-8) $15 General Components (resistors, capacitors, transistors, etc.) $70 Breadboards $20 Shipping and Handling Total $310 Matt

13 Project Timeline Kendra

14 Questions

15 Picture Sources http://www.nenomart.com/catalog/index.php?cPath=39


Download ppt "Matthew Daigle Robert Hunter Kendra Kreider Advisor: Richard Messner"

Similar presentations


Ads by Google