Download presentation
Presentation is loading. Please wait.
Published byAngelica Brogden Modified over 9 years ago
1
Voltaic Cells/Electrochemical Cells/Spontaneous Reactions
2
Involve the conversion of chemical energy into electrical energy Spontaneous reactions take place within the cells A flow of electrons is produced that can be captured to power a device We can use the activity series to see if our cell is operational Electrochemical Cells(Voltaic Cells)
4
1. Electrode – Metal Surface that conducts electricity This is the site of oxidation and reduction in the cell 2. Anode—Site of Oxidation (AN OX) The anode loses mass, and provides the electrons for the power This is the higher metal on Table J The anode has a negative charge (Source of electrons) Parts of an Electrochemical Cell
5
3. Cathode—Site of reduction within the voltaic cell Gains mass during the reactions in the cell Ions are reduced from the solution and attach themselves to the electrode in the cell This is the lower metal on Table J RED CATS Cathode has a POSITIVE charge (Draws the electrons to it) Parts Continued
7
4. Half-Cell—One half of an electrolytic cell set up 5. Salt-Bridge– device that allows for the movement of electrolyte ions Connects the cells to each other to prevent the build up of charge Without the salt-bride the charges build up in the cells and it stops working YOU MUST ALWAYS HAVE A SALT BRIDGE Parts Continued
8
Cell that requires the input of a current to get the reaction started These are non-spontaneous because under normal conditions the reaction will not take place Nonspontaneous Cells: Electrolytic Cells
10
1. NO Salt bridge 2. One Container 3. Non-spontaneous 4. Anode is Positive/Cathode is Negative AN OX STILL EATS RED CATS!!!!!!!!!! 4 Differences Between Electrochemical and Electrolytic Cells
11
1. Electrolysis---process where a current is used to initiate the reaction and separate compounds into elements Can be used to isolate hydrogen and oxygen from water Or to isolate a reactive metal (Sodium) from sodium chloride 2. Electroplating—process where a metal is coated with a different metal Used for corrosion prevention or alloying Uses of Electrolytic Cells
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.