1. C T A Camera Mechanics Rich Northrop University of Chicago 1 Design Review Argonne May 9, 2014 Final

2. Camera Mechanics Crate / Camera Assembly 2 Crate with Focal Plane Box being installed into Inner Frame Crate – Top Lattice, Carbon Fiber Posts, & Bulkhead Weight of empty Crate (as shown) - 118.8 kg (262 lbs.) Weight of Crate with 177 Modules - 264.0 kg (582 lbs.) ( OSS Mount Ring Not Shown )

3. Camera Mechanics - Sensor/Cage/FEE/Base Block Design Sensor / Foam/Heat Sink Top Cage Section FEE Boards Base Mount Bracket Module Prior to Insertion Sensor Fiducial Surface Thermal Slip Joint 3 Bottom Cage Section

4. 4 Major Revision Pending FEE Final Design Camera Mechanics Cage / FEE / Sensor

5. Camera Mechanics Mount Bracket / Injector-Ejector tool 5 Sliding Weight

6. Camera Mechanics 5 x 5 Test Crate / Sensor 6

7. 7 Test Module thermal cycling tests Test Module Vibration tests Flatness Hardware Show and Tell Post ends - inserts - Locktite

8. Camera Mechanics 5 x 5 Bulkhead – Motherboard 8 Latest MB Design ?

9. Camera Mechanics 5 x 5 Bulkhead Detail 9

10. Camera Mechanics Lattice 10

11. 11 Camera Mechanics Selected Design Issues Final FEE configuration, Mounting, & Rear Connector mate Surface treatment for Lattice or Cage Lattice Flatness (.004” TIR ) vs. costs ($23,285) Crate Mounting to Inner Frame details (hard mount to top - float/pin (Z) Final Cooling Design & Testing Inner & Outer covers - Access - component mounting CMM ?