1. ASHLOK Presents Safe Earthing Electrode (ASEEL)
“ YOUR SAFETY IS OUR RESPONSIBIlITY”

2. Need For Superior Earthing
Industrial Revolution and Infrastructure Development
Electronic Boom in the 1980’s
Requirement of Precise Ohmic Values for various applications
Protection from chaotic electrical Hazards
NOT TO BE FORGOTTEN:
Human Safety
Infrastructure Safety

3. EARTHING SYSTEM Earth Pit Conductive Electrodes
Soil Enhancing Compound

4. Significance of Good Earthing
Low impedance
Resist Corrosion
Sufficient Mechanical strength to hold fault current
Earth Resistance
Varies with different soils
To be Checked before earthing the site
Decide the earthing system for the requirement

5. TECHNOLOGY & STRUCTURE
Pipe In Pipe Technology
Coaxial Pipes ( One inside the other)
Adequate Mechanical strength
Galvanized or
Coated for effective corrosive resistance

6. Ashlok Earthing – Features
Crystalline Conductive Mixture (CCM):
Contains metal alloys and natural compounds
CCM is an unique mixture having.
Excellent conductivity.
High specific gravity.
Anti-corrosive Properties.
Excellent bonding properties.

7. Ashlok Earthing – Features
Back Fill Compound (BFC) : After erecting the pipe in the earth pit the BFC is mixed with water and filled around the pipe.
Not soluble & part of the earth pit.
Hydroscopic in nature.
Enhances performance of electrode – Electrolytic Gel solution.
Maintains moisture and enhances conductivity around the electrode.
Does not leach in to the normal soil.
Reduces soil resistivity around the electrode.

8. Ashlok Earthing - Benefits
Scientifically developed, Readymade and Standardized
Maintenance Free
Consistency
Larger surface area
Low earth resistance
Corrosion resistant & Eco friendly
Long life – yrs
As per IS 3043:1987 standards

9. TECHNICALITIES ASEEL 19 ( 3 Mtrs ) Dia 50mm 20 KA /sec of rms
51 KA peak value
ASEEL 39 ( 3 Mtrs ) Dia 80mm
40 KA /sec of rms
100 KA peak value

12. Ashlok Earthing – Specially Coated Electrodes
Advanced SPM ( Special Purpose Machine ) technology
80 – 100 microns of coating on the outer pipe.
Customized as per application & requirement
SPM Benefits
Thick Coating
Uniformity
Mat Finish
Products in 2009
Zinc coated
Copper coated
Alloy coated

14. Installation – Normal Soil
3 M Electrode – Normal Soil
Augur a hole of 10” Diameter and 10’ in depth.
Put BFC at the bottom of the pit (App 5 Kgs)
Place the electrode in the middle of the pit.
Filter the mother soil (taken out during auguring) - mix the BFC with the soil.
Start putting the mixture around the electrode with adequate supply of water in the pit.

15. Installation – Normal Soil
With a long stick, start poking the sides of the pits to help in mixing the compound well and to remove the air bubbles.
Fill the pit completely with the compound mixture and pour abundant water in and around the pit.
Leave the pit to rest for a day.
Construct a chamber and provide connection to the equipment.

16. Achievements & Credentials
Best product award – Elecrama 2008
Accomplished the toughest installation in remote regions of India, under the harshest conditions
Our electrode has the distinction of being the only Earthing product to withstand the highest short circuit current tested by CPRI
Successfully converted our 1st Annual turnover into daily turnover

17. Some Prominent Customers

18. Some Prominent Customers

19. L

20. Some Prominent CustomersL
Some Prominent Customers

21. Some Prominent Customers

22. Some Prominent Customers

23. Some Prominent Customers

24. Some Prominent CustomersL
Some Prominent Customers
Railways and Aviation

25. “” Please Act Smart & Fast - Be Safe THANK YOU ASHLOK SEE CONVENTIONAL
Long term – (15 – 20 yrs)
One Time investment
Maintenance Free
Better Ohmic Value
Short Term ( 1 – 2 yrs )
Repetitive Investment
Continuous maintenance
Unpredicted Ohmic Value
Performance, Value, Safety & Good price (Vs) Only less COST
Please Act Smart & Fast - Be Safe
THANK YOU “”