1. DISTRIBUTED BY

2. A non-toxic, Planet Friendly solution for soil remediation  Proven effective in the field with documented test results Environmental cleanup:  Proven superior in eliminating TPH contamination caused by oil spills and fuel oil leakage  Effective in treating large and small contaminate sites  No costly “dig and haul” methods that require soil removal and replacement

3. PROJECT CASE STUDY Location: South Louisiana Project: Drill Yard Site Remediation Contaminate: Petroleum Hydrocarbons 490 cubic yards of soil Initial TPH Levels Prior To Treatment: 6,000 ppm TPH Levels After Treatment : 10 ppm after 12 days ***Louisiana Department of Environmental Quality declared the site clear after testing on the 12 th day. Est. cost savings $122/yd

4. BEFORE TREATMENT

5. AFTER TREATMENT

6. Proven Field Results BEFOREAFTER

7. A non-toxic, planet friendly solution for soil remediation Frelo Hydrocarbon Converter is a specifically blended silicate based liquid that reduces hydrocarbons >98% upon contact when applied to impacted soils, surface and groundwater. A minimal reaction time renders the contaminant irreversibly altered

8. TESTED AND APPROVED FOR USE BY THE NIGERIAN GOVERNMENT

9. BEFORE TREATMENT

10. AFTER TREATMENT

11. Proven Field Results BEFORE AFTER

12. Observe and Test The Difference of Frelo’s Hydrocarbon Converter Unlike some of the present methods, surfactants and fertilizer, the Frelo Hydrocarbon Converter actually changes the composition of the hydrocarbons rather than just breaking them down as a surfactant would do into smaller particles and then using a fertilizer to make the grass grow but still leaving the hydrocarbons intact to eventually dissipate over time. A non-toxic, planet friendly solution for soil remediation

13. DISTRIBUTED BY

14. PROJECT CASE STUDY Location: Kirby, Arkansas Project: Diesel Spill on land and water. Contaminate: 300 gallons of diesel fuel migrated approx. 450 yards across a parking lot, pasture land, and into a farm pond Initial TPH Levels Prior To Treatment: 15,400 ppm TPH Levels After Treatment : 40.4 ppm after 72 hours ***Arkansas Dept. of Environmental Quality, Army Corps of Engineers, and Pike County Office of Emergency Services surveyed the area after cleanup and declared the site clear.

15. Observe and Test the Difference of Frelo’s Hydrocarbon Converter  The sodium silicate attaches to the weak hydrocarbon molecule. Also, FRELO HYDROCARBON CONVERTER is not corrosive and contains biodegradable ingredients and actually helps acidic soil by raising the pH and thus allowing natural organisms to work in the soil. A non-toxic, planet friendly solution for soil remediation  FRELO HYDROCARBON CONVERTER typically works much faster than typical remediation procedures. The catalytic conversion process begins upon the drying of the FRELO HYDROCARBON CONVERTER.

16. BEFORE TREATMENT

17. AFTER TREATMENT

18. BEFOREAFTER Proven Field Results

19. Compare the Benefits of Frelo Technology Frelo Hydrocarbon Converter does not add hazardous ingredients to the soil and/or water matrix. Unlike microbes, Frelo Hydrocarbon converter is not dependent upon soil type and you are not adding new microbes to the the environment. Results can actually be noticed in as little as 72 hours depending upon weather conditions. A non-toxic, planet friendly solution for soil remediation

21. DISTRIBUTED BY

22. PROJECT CASE STUDY Location: California North Coast Project: Gasoline on soil Contaminate: 1,915 cubic yards of soil impacted from gasoline tank spill Initial TPH Levels Prior To Treatment: 7,000 ppm TPH Levels After Treatment : Non Detect after 14 days

23. A non-toxic, planet friendly solution for soil remediation Frelo Hydrocarbon Converter is non-corrosive to metal surfaces. Highly specialized equipment is not necessary to apply Frelo Hydrocarbon Converter. People can be easily trained to apply Frelo Hydrocarbon Converter. It is not considered hazardous in terms of shipping and storage and is not flammable.

24. BEFORE TREATMENT

25. AFTER TREATMENT

26. Proven Field Results BEFOREAFTER

27. Proven science behind the product The breakdown of TPH (GRO, DRO) occurs upon direct contact of Frelo with the hydrocarbon contaminant. The process is described by leading chemist as a “catalytic conversion” and by the mechanism of dehydration of the hydrocarbon chain and a free substitution of the SiO radical in the presence of oxygen, the silicate molecule attaches to active sites on the hydrocarbon chain, converting the hydrocarbon to an organo-silicate residue.

28. DISTRIBUTED BY

29. BEFORE TREATMENT

30. AFTER TREATMENT

31. Proven Field Results BEFOREAFTER

32. PROJECT CASE STUDY Location: Hot Springs, Arkansas Project: Utility Vault Contaminate: 300 Gallons of Gasoline and 2000 gallons of water in a concrete containment vault Initial TPH Levels Prior To Treatment: 10,000 ppm TPH Levels After Treatment : 34 ppm after 24 hours ***Arkansas Dept. of Environmental Quality declared the site clear afer 24 hours and the water was flushed in the city sewer.

33. BEFORE TREATMENT

34. AFTER TREATMENT

35. Proven Field Results BEFOREAFTER

36. DISTRIBUTED BY

37. BEFORE TREATMENT

38. AFTER TREATMENT

39. Proven Field Results BEFOREAFTER

42. PROJECT CASE STUDY Location: Haynesville, Louisiana Project: Crude Oil Release on Soil Contaminate: 400 gallons of crude oil washed approximately 100 yards after rain Initial TPH Levels Prior To Treatment: Not Tested TPH Levels After Treatment : < 100ppm within days ***Louisiana Department of Environmental Quality approved the area without having to haul any soil for remediation.