1. 1 Organic Chemistry, Second Edition Janice Gorzynski Smith University of Hawai’i Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Prepared by Rabi Ann Musah State University of New York at Albany Chapter 3 Functional Groups

2. 2 Functional Groups: A functional group is an atom or a group of atoms with characteristic chemical and physical properties. It is the reactive part of a molecule. Organic compounds having only C—C and C—H bonds are called Hydrocarbons. There are four classes of hydrocarbons: alkanes, alkenes, akynes and aromatics. Alkanes are saturated structures and the others contain unsaturations. Many organic molecules contain Heteroatoms, these are atoms other than carbon or hydrogen. Organic Molecules and Functional Groups

3. 3 Functional Groups: Hydrocarbons Hydrocarbons are compounds made up of only the elements carbon and hydrogen. They may be aliphatic or aromatic. Organic Molecules and Functional Groups

4. 4 Functional Groups: Heteroatoms Organic Molecules and Functional Groups

5. 5 Functional Groups: Carbonyl groups

6. 6 Functional Groups: Heteroatoms and  bonds confer reactivity on a particular molecule. Heteroatoms have lone pairs and create electron- deficient sites on carbon.  Bonds are easily broken in chemical reactions. A  bond makes a molecule a base and a nucleophile. Don’t think that the C—C and C—H bonds are unimportant. They form the carbon backbone or skeleton to which the functional group is attached. Organic Molecules and Functional Groups

7. 7 Functional Groups: Ethane: This molecule has only C — C and C — H bonds, so it has no functional group. It has no polar bonds, no lone pairs, and no  bonds, so it has no reactive sites. It is very unreactive. Ethanol: This molecule has an OH group attached to its backbone. It is called a hydroxy functional group. Ethanol has lone pairs and polar bonds that make it reactive with a variety of reagents. The hydroxy group makes the properties of ethanol very different from the properties of ethane. Organic Molecules and Functional Groups

8. 8 Functional Groups: Aromatic hydrocarbons are so named because many of the earliest known aromatic compounds had strong characteristic odors. The simplest aromatic hydrocarbon is benzene. The six- membered ring and three  bonds of benzene comprise a single functional group. When a benzene ring is bonded to another group, it is called a phenyl group. Organic Molecules and Functional Groups

9. 9 Functional Groups: Examples of Molecules Containing C-Z  Bonds (where Z is a heteroatom). Organic Molecules and Functional Groups

10. 10 Functional Groups: Compounds Containing the C=O Group: This group is called a “carbonyl group”. The polar C — O bond makes the carbonyl carbon an electrophile, while the lone pairs on O allow it to react as a nucleophile and base. The carbonyl group also contains a  bond that is more easily broken than a C — O  bond. Organic Molecules and Functional Groups

11. 11 Functional Groups: Molecules Containing the C=O Functional Group Organic Molecules and Functional Groups

12. 12 Functional Groups: It should be noted that the importance of a functional group cannot be overstated. A functional group determines all of the following properties of a molecule:  Bonding and shape  Chemical reactivity  Type and strength of intermolecular forces  Physical properties  Nomenclature Organic Molecules and Functional Groups

13. 13 Intermolecular Forces: Intermolecular forces are interactions that exist between molecules. Functional groups determine the type and strength of these interactions. There are several types of intermolecular interactions. Ionic compounds contain oppositely charged particles held together by extremely strong electrostatic inter- actions. These ionic inter- actions are much stronger than the intermolecular forces present between covalent molecules. Organic Molecules and Functional Groups

14. 14 Covalent compounds are composed of discrete molecules. The nature of the forces between molecules depends on the functional group present. There are three different types of interactions, shown below in order of increasing strength:  van der Waals forces (London forces)  dipole-dipole interactions  hydrogen bonding Intermolecular Forces: Organic Molecules and Functional Groups

15. 15 Intermolecular Forces: van der Waals Forces van der Waals forces are also known as London forces. They are weak interactions caused by momentary changes in electron density in a molecule. They are the only attractive forces present in nonpolar compounds. Even though CH 4 has no net dipole, at any one instant its electron density may not be completely symmetrical, resulting in a temporary dipole. This can induce a temporary dipole in another molecule. The weak interactions of this type constitutes van der Waals forces. Organic Molecules and Functional Groups

16. 16 All compounds exhibit van der Waals forces. The surface area of a molecule determines the strength of the van der Waals interactions between molecules. The larger the surface area, the larger the attractive force between two molecules, and the stronger the intermolecular forces. Intermolecular Forces: van der Waals Forces Figure 3.1 Surface area and van der Waals forces Organic Molecules and Functional Groups

17. 17 van der Waals forces are also affected by polarizability. Polarizability is a measure of how the electron cloud around an atom responds to changes in its electronic environment. Larger atoms, like iodine, which have more loosely held valence electrons, are more polarizable than smaller atoms like fluorine, which have more tightly held electrons. Thus, two F 2 molecules have little attractive force between them since the electrons are tightly held and temporary dipoles are difficult to induce. Intermolecular Forces: van der Waals Forces Organic Molecules and Functional Groups

18. 18 Intermolecular Forces: Dipole-Dipole Interactions Dipole—dipole interactions are the attractive forces between the permanent dipoles of two polar molecules. Consider acetone (below). The dipoles in adjacent molecules align so that the partial positive and partial negative charges are in close proximity. These attractive forces caused by permanent dipoles are much stronger than weak van der Waals forces. Organic Molecules and Functional Groups

19. 19 Hydrogen bonding typically occurs when a hydrogen atom bonded to O, N, or F, is electrostatically attracted to a lone pair of electrons on an O, N, or F atom in another molecule. Intermolecular Forces: Hydrogen Bonding Organic Molecules and Functional Groups

20. 20 Note: as the polarity of an organic molecule increases, so does the strength of its intermolecular forces. Organic Molecules and Functional Groups Intermolecular Forces: Summary

21. 21 Physical Properties: Boiling Point The boiling point of a compound is the temperature at which liquid molecules are converted into gas. In boiling, energy is needed to overcome the attractive forces in the more ordered liquid state. The stronger the intermolecular forces, the higher the boiling point. For compounds with approximately the same molecular weight: Organic Molecules and Functional Groups

22. 22 Consider the example below. Note that the relative strength of the intermolecular forces increases from pentane to butanal to 1-butanol. The boiling points of these compounds increase in the same order. For two compounds with similar functional groups: The larger the surface area, the higher the boiling point. The more polarizable the atoms, the higher the boiling point. Organic Molecules and Functional Groups Physical Properties: Boiling Point

23. 23 Liquids having different boiling points can be separated in the laboratory using a distillation apparatus, shown below. Organic Molecules and Functional Groups Figure 3.3 Schematic of a distillation apparatus Physical Properties: Boiling Point

24. 24 The melting point is the temperature at which a solid is converted to its liquid phase. In melting, energy is needed to overcome the attractive forces in the more ordered crystalline solid. The stronger the intermolecular forces, the higher the melting point. Given the same functional group, the more symmetrical the compound, the higher the melting point. Physical Properties: Melting Point Organic Molecules and Functional Groups

25. 25 Because ionic compounds are held together by extremely strong interactions, they have very high melting points. With covalent molecules, the melting point depends upon the identity of the functional group. For compounds of approximately the same molecular weight: Organic Molecules and Functional Groups Physical Properties: Melting Point

26. 26 The trend in melting points of pentane, butanal, and 1-butanol parallels the trend observed in their boiling points. Organic Molecules and Functional Groups Physical Properties: Melting Point

27. 27 Symmetry also plays a role in determining the melting points of compounds having the same functional group and similar molecular weights, but very different shapes. A compact symmetrical molecule like neopentane packs well into a crystalline lattice whereas isopentane, which has a CH 3 group dangling from a four-carbon chain, does not. Thus, neopentane has a much higher melting point. Organic Molecules and Functional Groups Physical Properties: Melting Point

28. 28 Solubility is the extent to which a compound, called a solute, dissolves in a liquid, called a solvent. In dissolving a compound, the energy needed to break up the interactions between the molecules or ions of the solute comes from new interactions between the solute and the solvent. Physical Properties: Solubility Organic Molecules and Functional Groups

29. 29 To dissolve an ionic compound, the strong ion-ion interactions must be replaced by many weaker ion-dipole interactions. Organic Molecules and Functional Groups Physical Properties: Solubility Figure 3.4 Dissolving a ionic compound in H 2 O

30. 30 Compounds dissolve in solvents having similar kinds of intermolecular forces. “Like dissolves like.” Polar compounds dissolve in polar solvents. Nonpolar or weakly polar compounds dissolve in nonpolar or weakly polar solvents. Water and organic solvents are two different kinds of solvents. Water is very polar and is capable of hydrogen bonding with a solute. Many organic solvents are either nonpolar, like carbon tetrachloride (CCl 4 ) and hexane [CH 3 (CH 2 ) 4 CH 3 ], or weakly polar, like diethyl ether (CH 3 CH 2 OCH 2 CH 3 ). Most ionic compounds are soluble in water, but insoluble in organic solvents. Organic Molecules and Functional Groups Physical Properties: Solubility

31. 31 An organic compound is water soluble only if it contains one polar functional group capable of hydrogen bonding with the solvent for every five C atoms it contains. For example, compare the solubility of butane and acetone in H 2 O and CCl 4. Organic Molecules and Functional Groups Physical Properties: Solubility

32. 32 Since butane and acetone are both organic compounds having a C—C and C—H backbone, they are soluble in the organic solvent CCl 4. Butane, which is nonpolar, is insoluble in H 2 O. Acetone is soluble in H 2 O because it contains only three C atoms and its O atom can hydrogen bond with an H atom of H 2 O. Organic Molecules and Functional Groups Physical Properties: Solubility

33. 33 The size of an organic molecule with a polar functional group determines its water solubility. A low molecular weight alcohol like ethanol is water soluble since it has a small carbon skeleton of  five C atoms, compared to the size of its polar OH group. Cholesterol has 27 carbon atoms and only one OH group. Its carbon skeleton is too large for the OH group to solubilize by hydrogen bonding, so cholesterol is insoluble in water. Organic Molecules and Functional Groups Physical Properties: Solubility

34. 34 The nonpolar part of a molecule that is not attracted to H 2 O is said to be hydrophobic. The polar part of a molecule that can hydrogen bond to H 2 O is said to be hydrophilic. In cholesterol, for example, the hydroxy group is hydrophilic, whereas the carbon skeleton is hydrophobic. Figure 3.5 Solubility summary Organic Molecules and Functional Groups Physical Properties: Solubility

35. 35 Influence of Functional Groups on Reactivity: Recall that: Functional groups create reactive sites in molecules. Electron-rich sites react with electron poor sites. All functional groups contain a heteroatom, a  bond or both, and these features create electron-deficient (or electrophilic) sites and electron-rich (or nucleophilic) sites in a molecule. Molecules react at these sites. Organic Molecules and Functional Groups

36. 36 Organic Molecules and Functional Groups Influence of Functional Groups on Reactivity:

37. 37 An electron-deficient carbon (electrophilic) reacts with a nucleophile, symbolized as :Nu ¯. An electron-rich carbon (nucleophilic) reacts with an electrophile, symbolized as E +. Example 1: alkenes contain an electron rich double bond, and so they react with electrophiles E +. Organic Molecules and Functional Groups Influence of Functional Groups on Reactivity:

38. 38 Example 2: alkyl halides possess an electrophilic carbon atom due to the electron withdrawing effect of the halogen atom, so they react with electron-rich nucleophiles. Organic Molecules and Functional Groups Influence of Functional Groups on Reactivity:

39. 39 Organic Chemistry, Second Edition Janice Gorzynski Smith University of Hawai’i Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Prepared by Rabi Ann Musah State University of New York at Albany End Chapter 3