Download presentation
Presentation is loading. Please wait.
1
Gary Carlson Drinking Water Program EPA Region 8
Sanitary Surveys Gary Carlson Drinking Water Program EPA Region 8
2
Sanitary Surveys Who What When Why Typical Findings
3
Sanitary Surveys Who conducts sanitary surveys?
- State Program staff or an agent or contractor approved by the regulator (40 CFR (d)(2))
4
Sanitary Surveys The Surveyor should have:
- experience or knowledge about the operation and maintenance of public water systems - a sound understanding of public health principles and waterborne diseases - a thorough understanding of applicable regulations
5
Sanitary Surveys A Sanitary Survey is an on-site evaluation of:
- the system’s water source(s) - treatment - storage and distribution facilities and equipment - the operation and maintenance practices for each
6
Sanitary Surveys How are Sanitary Surveys done?
- Before doing a survey: Surveyors need to do a thorough review of existing monitoring data, past surveys, and well logs - Survey visit must be coordinated with manager or operator
7
Sanitary Surveys How are Sanitary Surveys done?
- During a survey: look for key problems; walk through entire facility; thorough interview of operator; use standard format - take pictures, sketch the entire water system - get latitude and longitude or township range information on key features of the water system
8
Sanitary Surveys How are Sanitary Surveys done?
After survey is complete: - write complete report and highlight problems that need correction
9
Sanitary Surveys When are Sanitary Surveys done?
- An initial survey by June 29, 1999 of all non-community systems that do not collect at least 5 or more routine samples for bacteriological analyses each month, and - once every five years thereafter except that,...
10
Sanitary Surveys When are Sanitary Surveys done? (40 CFR 141.21(d))
- non-community water systems using only protected and disinfected groundwater must undergo a sanitary survey at least once every ten years following the initial survey (40 CFR (d))
11
Sanitary Surveys Why are Sanitary Surveys necessary?
- to identify deficiencies in a water system before they become a threat to public health - to help operators develop a better understanding of the importance of their duties - to help operators improve their operations so that they stay in compliance with the regulations
12
Sanitary Surveys Typical findings during Sanitary Surveys:
- unprotected hose bibs; threaded spigot with no anti-siphon device - no locks on storage tanks, collection vaults, treatment facilities, outside electrical panels - tank covers that allow entrance of contaminants; holes, bad fit, rotting wood
13
Sanitary Surveys Typical findings, continued:
storage of fuel and/or flammables, chemicals in well houses, water treatment buildings or vaults sanitary wellhead seals compromised by open holes through seal for electrical service and/or open hole for vent
14
Sanitary Surveys Typical findings, continued:
- well vaults that flood above the height of the well casing - leaky vault toilets within the recharge area of the well or spring - damaged facilities, tanks, equipment that has not been repaired
15
Sanitary Surveys Typical findings, continued:
- spring developments with no fence to keep livestock, wildlife, people and development away from the recharge and collection areas - springs with no surface drainage up-gradient of collection area; no screens on overflow, drain and vents
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.