1. Plots, Graphs, and Sketches (1.1)
Plots or Graphs - Generally the most effective format for displaying and conveying the interrelation of experimental variables.
Sketches - Quick and informal method of sharing ideas with others or clarify concepts for yourself. Free body diagrams (FBDs) are an example.

2. Plots and Graphs Means of Communicating Ideas Concisely Axes
X-axis (horizontal, independent variable)
Y-axis (vertical, dependent variable)
Divide major axes into appropriate divisions of 1, 2, 10, 10X, etc
Label with words, symbols, and units
Minor axes should be distributed evenly

3. Plots and Graphs

4. Sketch

5. Sections 1.2 Functions: Independent variables (Cause /Input /Action)
Dependent variables (Effect /Output / Reaction)

6. Dependent / Independent Variables
Dependent variables (Y-axis) values will depend on the value
of independent variables (X-axis).
Notation in math and science
- parameter name = f ( independent 1, independent 2,…)
- example : p = f (, z)
Developing the relationship between the dependent and
independent variable
Experiment: collect raw data and draw the curve.
apply fairing algorithm and interpolate regression analysis.
Conservation law or theoretical principles
Semi-empirical equation 1) identify the important parameter.
2) develop analytical equations through experiments

7. Sections 1.3
“Area under the curve”
“Slope of the curve”

8. Area Under and Instantaneous Slope of a Curve

9. Section 1.4 Unit Systems Carry units through all calculations S.I.
Pound force - pound mass
Pound - slug: What we will use
Carry units through all calculations
If the units are wrong, the answer is wrong

10. Units 1 slug is defined as the mass that will
g sub c is the mass conversion factor known as the gravitational constant.
1 slug is defined as the mass that will
be accelerated at a rate of 1 ft/s2 by a
1 lb force.

11. Unit Analysis If you get unreasonable values:
- check the units in the process of calculations
To avoid mistakes:
- know the units of each parameter
- understand the relationship between fundamental
dimensions and their units
Ruled Lines Method :
LT = 4000 ft³ | lb-s² | ft | 1 LT
| ft^ | s² | 2240 lb
= LT

12. Section 1.5 Significant figures Exact numbers Measurements
Addition/subtraction
Multiplication/division

13. Significant Figures The number of accurate digits in a number
Example: 2.65 has 3 significant figures
Example: 10 has 1 or 2 , 10.0 has 3
Multiplication / Division: Use the same # of
significant figures as the number with the least # of significant figures
Example: 20 x = 69
Addition / Subtraction: Use the same # of
decimal places as the number with the least # of decimal places
Example: = 4.8

14. General Problem Solving Technique
Write down applicable reference equation which contains the desired “answer variable”.
Solve the reference equation for the “answer variable”.
Write down additional reference equations and solve for unknown variables in the “answer variable” equation, if needed.
Draw a quick sketch to show what information is given and needed and identify variables, if applicable.
Rewrite “answer variable” equation, substituting numeric values with units for variables.
Simplify this expanded equation, including units, to arrive at the final answer.
Check the answer:
Do units match answer?
Is the answer on the right order of magnitude?

15. Section 1.6 Linear Interpolation Assume a straight line
Output
Linear Interpolation
Assume a straight line
Use anchor point, output range, and domain fraction from anchor point to input value.
Output=anchor+{range*fraction}
y3= y1+ {(y2-y1)*(x3-x1)/(x2-x1)} y2
y3=? y1 x1 x3
Input
Output y2 y3
y1=Anchor x1 x3 x2
Input 2

16. Linear Interpolation Example
Temperature (°F)
Density (lb-s2/ft4) 61
1.9381 62
1.9379 63
1.9377
Solve for the density at 62.7°F as follows:
Only one unknown (density at 62.7 deg F)

17. Section 1.7 Scalars & Vectors Forces & Weight
Point forces (centroid of a force distribution)
Distributed forces (such as Pressure)
Moments & Couples: Force × Distance
Static Equilibrium:
Hydrostatic Pressure = Phyd = rgz
Fhyd = Phyd×Area 3

18. Rectangular Coordinate Systemz y x

19. Scalars and Vectors F Fy F Fx Scalar has only magnitude.
- Example : mass, speed, work, energy
Vector has its magnitude and direction.
- Example : velocity, force, momentum, acceleration
- Way of presentation : boldface, symbol with a half/full arrow
( notation should be consistent in the text.)
Vectors can be resolved into scalar components in each principal dimension. F Fy F Fx

20. Vectors - Vector symbols often have subscripts to better clarify.
resultant buoyant force
resultant weight of ship = displacement
line of action
- Naval Engineers uses to represent a change in a property.
Ex ; : change in a draft due to parallel sinkage

21. Forces, Moments, and Couples
FORCE - a vector quantity with magnitude
and a direction.
MOMENT - force times a distance with
respect to a given origin, i.e.
COUPLE - a special case a of moment that
results in pure rotation and no translation.

22. Forces Point Force Distributed force and its resultant point force. F
100 lb/ft
1000 lb
20 ft
10 ft
Point Force
Distributed force and its resultant point force.

23. Moments d Moment = Force x Distance (M = F x d) Units: foot - pounds F
Example of a moment applied with a wrench
Increasing F or d will increase the magnitude of the Moment about the nut
Moment = Force x Distance (M = F x d)
Units: foot - pounds

24. Couples
Two forces creating a couple F
Couple = Force  distance
C = F  d
Units: foot-pounds d F
The magnitude of a couple is calculated by multiplying the magnitude of one force by the distance separating the two forces.
The two forces must be equal in magnitude and opposite in direction for pure rotation without translation.

25. Static Equilibrium
If an object is neither accelerating or decelerating then it is because the following 2 conditions are met:
Sum of the forces = 0
Sum of the moments = 0

26. Hydrostatic Pressure Air pressure is ~ 15 psi.
“Pressure” is the amount of force applied to a given area (p=F/A)
In English units it is pounds/sq. ft. or pounds/sq. in., or “psi”
Air pressure is ~ 15 psi.
At 440 ft below sea level it is ~ 195 psi!

27. Hydrostatic Pressure & Force
If an object is floating in water and the object and water are both at rest, then the pressure exerted by the water on the object is referred to as hydrostatic pressure and is defined as:
Phyd = gz where  = water density (lb-s2/ft4)
g = acceleration of gravity (ft/s2)
z = depth of object below the
water’s surface (ft)
Hydrostatic pressure acting over an area (A) results in a Hydrostatic Force where Fhyd = Phyd A.

28. The Mathematical First, Second and Third Moments
These integrals are used in mathematical
descriptions of physical problems
Where:
s = some distance
db = some differential property
= summation

29. The Mathematical First and Second Moments
In Naval Architecture:
“b” could represent length, area, volume, or mass
“s” is a length or distance
First Moment of Mass 
Second Moment of Area 

30. Weighted Averages In Naval Architecture, we use the simplified form:
Used to find: Longitudinal Center of Flotation (LCF), Longitudinal Center of Buoyancy (LCB) Centers of Gravity (LCG, TCG, VCG)

31. Mathematical Moments and the Parallel Axis Theorem
First Moment=òsdm
Mx=òydA; My=òxdA; AT=òdA
Centroids: y = Mx/AT : x = My/AT
Second Moment=òs²dm
Ix=òy²dA; Iy=òx²dA
Ix= Ixc+Ad12; Iy= Iyc+Ad22
Use Appendix C dA y x y x C xc yc d1 d2 A

32. Translational vs. Rotational Motion
Ship freely floating is subject to 6 degrees of freedom.
Three are Translational
Heave (z)
Sway (y)
Surge (x)
Three are Rotational
Yaw (z)
Pitch (y)
Roll (x)

33. Ship’s Axes and Degrees of Freedomy z
Heave
Surge
Sway
Pitch/Trim
Roll/List/Heel
Yaw

34. Section 1.9
Bernoulli’s Equation:
Flow Energy + Kinetic Energy + Gravitational Potential Energy=Available Energy
(Assumes steady, frictionless, incompressible flow along a streamline)
p=hydrostatic pressure at any point in the stream
V=speed of the fluid at any point on the stream
g=acceleration of gravity
z=height of the streamline point above reference
r=fluid density
Along a line of equal energy (a streamline) in a fluid, the above is a constant.

35. Bernoulli Equation
Total pressure is constant in a fluid, if:
inviscid flow (no viscosity)
incompressible flow
steady flow
This gives us hydrostatic and hydrodynamic pressure. These are the water loads on the vessel.

36. Pressure Prediction These are the same as an aircraft!
Vertical pressure supports the vessel (lift versus weight)
Horizontal pressure is thrust and drag
These are the same as an aircraft!

37. Example Problem
A 50ft wide, 100ft long barge on an even keel is divided into forward and aft compartments by a transverse bulkhead 60ft aft of the bow. The barge weighs 100LT empty with an even weight distribution. The forward tank is then filled to a height of 5ft and the aft tank to a height of 4ft with oil (r=1.80lb-s²/ft4)
What is the total weight of the barge?
At what point (fore and aft) would this weight be applied?
Which degrees of freedom for the barge were affected by loading the oil and in what direction?

38. Answer: 60ft 40ft 5ft deep 4ft deep 50ft Weightbow compt=rgV=
(1.80lb-s²/ft4) (32.17ft/s²)(50ft×60ft×5ft)(1LT/2240lb)= 388LT
Weightaft compt=rgV=
(1.80lb-s²/ft4) (32.17ft/s²)(50ft×40ft×4ft)(1LT/2240lb)
=207LT
Weighttotal=388LT+207LT+100LT=695LT

39. Answer: Application point=
60 ft
40 ft
Answer:
5ft
deep
4ft
deep
50 ft
0ft
Application point=
= [(100LT×50ft)+(388LT×30ft)+(207LT×80ft)] LT
= 47.8ft
Barge became heavier, draft increased, barge sank in the heave direction. More weight was placed forward, so barge pitched forward.

40. Example Problem
A Landing Craft Medium (LCM8) boat has an empty draft of 1 ft. A 60 LT tank is loaded into the boat.
How many 250 lb combat ready Marines can board the LCM and still be able to cross a 4 foot shoal with 1 foot to spare on the way to the beach?
Data:
LCM dimensions: 75 ft long × 21 ft wide × 4.5 ft high
Propulsion: 1300 HP from 2 diesels on separate shafts
dT=dw/TPI (T=draft; w=weight; TPI= long tons/inch)
1 LT=2240 lb
rgsw=64 lb/ft3

41. Example Answer Displacement = Density x Submerged Volume
Vessel Submerged Volume = (75 ft)(21 ft )(1 ft) = ft3
(62.4 lb/ ft3)(1575 ft3)=98280 lb
(98280lb)/(2240lb/LT)= LT (Empty)
Tons per Inch (TPI) = LT /12 in= LT/ in
(24 in)(3.656 LT/ in)= 87.74LT
87.74LT-60LT=27.74 LT is allowable
(27.74 LT)(2240 LT/lb)/(250lb/Marine)=248 Marines
Max change in draft =
4 foot shoal –
1 foot draft empty –
1 foot margin
= 2 feet
60 LT +
# Marines
1 foot draft empty
4 foot
shoal
1 foot margin
1 foot margin
1 foot draft empty
4 foot
shoal
Max change in draft
= 4’ shoal – 1’draft empty – 1’ margin
= 2’
60 LTs + # Marines

42. Example Problem
A 100 ft Barge with an empty weight distribution of 2LT/ft is loaded with the following additional loads:
What is the total weight of the barge and where, along the length, is the center of gravity? Y
<-30ft->
<-40ft->
<-30ft->
2LT/ft
4LT/ft
1LT/ft
Empty Barge=2LT/ft X
100ft

43. Example Answer Weight Weighted Average of each weight:
=(2LT/ft×100ft)+(2LT/ft×30ft)+(4LT/ft×40ft)+(1LT/ft×30ft)
= 200LT+60LT+160LT+30LT=450LT
Weighted Average of each weight:
200 LT × 50ft= 10,000 LT-ft
60 LT × 15ft= 900 LT-ft
160 LT × 50ft= 8000 LT-ft
30 LT × 85ft= 2550 LT-ft
Sum=10, = 21450LT-ft
Weighted Average=21450LT-ft/450LT=47.7ft
Center of Gravity along X axis=47.7ft Y
450 LT
47.7ft
Loaded Barge X
100ft