1. Common Shape Candle Making Machine Including common shape, pillar shape, spiral shape, taper shape.

2. Commons shape candle machine  The machine is simple in structure and small in size. The mould are made of seamless steel pipes. section steel and steel sheet to assure precision and easy operation. The pushrods are connected with seamless steel threads and can be moved up and down to vary the length of the candle. The machine is cooled through a circulating water system.

3. The machine after be packed  The various models of candle expect for specifications on the catalogue we make other models of machines according to the candle sizes and samples given by the customers. Besides, we have more than 280 kind of candle machines, welcome to order. We also produce pule Changeable candle machine and taillight pressing tally automatic candle machine.

4. 1.A brief of the candle making machine My moulding machines are specially designed for making candles of various forms. 2. Structure and Performance of common candle making machine 2.1 Structure The machine is composed of candle holding dish, water tank, machine frame, spool box, hand wheel, spindle, bevel gear, lead screw, nut, nut shelf, bearing box, cross beam, push-off tube and candle moulding tubes, etc.

5. Candle making machine  2.2 Performance  1.2.1 Water tank, candle moulding tube enable the fluid wax to solidify by means of circulating water in the tube.  1.2.2 Candle holding dish make usre that the wick is in the center of the tube and the candle to be properly placed and clamped.  1.2.3 Lead heads and push-off tubes are used for the forming of the candle tip and the push of the candle from the candle moulding tube.  1.2.4 The spool box is used for mounting the wick spool.

6. Operation 4. Operation Process  4.1 Rotate the hand wheel to making cross beam fall to the lower stopping position. Place the candle holding-dish in the slot on the locating plate, pull the locating plate to the front stopping point. Hang the wick in the serrate slot of the candle-holding plate. When the wax liquid half solids, cut off the wick, remove the candle-holding, dump the residual wax liquid. When the wax liquid in the candle moulding tube completely solidifies, rotate the hand wheel, through movement of the bevel gear, lead screw, nut and nut shelf, move the cross rail and push the candle off tube. Put on the candle-holding dish to store the candle. Let the wick enter the serrated hole, rotate the hand wheel to lower the cross beam to the lower stopping position.

7. Candle making machine 5. Packing and transportation  The machine shall be covered with a plastic film to prevent entrance of water. It shall be enclosed by wooden box combined with iron nails. The box shall be reinforced by iron wires at the two ends to prevent damages in transportation. The box shall not be turned upside-down and shall avoid clashes.

8. Do you know Xuguan?  It is a good thing for me to talk with you about chalk making, if you have any question or problem, please do not hesitate to contact me.  Www.xuguan.net  xuguan@online.ln.cn  webmaster@xuguan.net  Tel: 86-1300 947 1870