1. TerraMod Basin Modelling Software Demonstrationof Thrust Models

2. TerraMod Thrust Modelling u Event Type = Thrust u Emplaces Older Layers on Younger u Define:  Timing and Duration of Thrusting  Layers Cut Out by Thrust  Transient Heat Flow During Thrusting

4. Select Project: Thrusts

7. Select Event Type

9. Calibration Data are Vital for Accurate and Realistic Models

11. Example of Kinetic Data for Custom Source Rock

12. Thrust Emplacement

17. Pressure u Simulation Calculates Detailed Transient Pressure Histories  Review Excess Pressure with Depth Plot ‘Time- Slices’ uExcess Pressure Plots - Measure Supra-Normal & Sub-Normal Pressures from Hydrostatic.

18. Select Excess Pressure Plot Type

19. Select Time-Slice to Plot

20. No Excess Pressures Prior to Thrusting and Associated Rapid Sediment Loading

21. Review Each Time Step for Development of Excess Pressures Associated With Thrust Loading

22. Slight Elevation of Pressures Above Hydrostatic (Note Auto-Scaling on X-Axis)

23. Development of Early Excess- Pressures From Rapid Sediment Loading Ahead of Thrust Front

24. Large Increase in Excess- Pressures (>30,000 kPa) Associated With Emplacement of Thrust Sheet

25. Excess-Pressures Decline to >5000 kPa

26. Continued Declining of Excess-Pressures

27. Declining Excess-Pressures Within 6 Myrs. After Thrust Emplacement

37. Increased Heating Rate and Peak Oil Generation Associated with Thrust Emplacement

38. Detailed Temperature History of Each Layer Tracked Through Time

39. Porosities of Individual Layers are Tracked Through Time