Download presentation
Presentation is loading. Please wait.
Published byStephanie Walker Modified over 9 years ago
2
Chapter 11 General Service Areas Types of Service Areas Designed the laundry area Usually has a service entrance May have an ironing area May have a sewing area Adding a dehumidifier will reduce excess moisture 110V and 220V outlets should be provided in the room Light fixtures should be 48” above a laundry appliance
3
Garage 3 Basic types Integral Detached Carport
4
Garage Doors Four-leaf Over-head Two-leaf Sectional roll-up
5
Sizes Range from 6’-6” to 8’-0” in height Range from 7’-0” to 20’-0” in width Minimum slab thickness is 4” Clearance required between overhead doors and ceiling projection is 16”
6
Materials Aluminum Wood Steel Fiberglass
7
Materials for Driveways Concrete Welded wire fabric is used to prevent cracking Asphalt Brick
8
Workshops Planned for working with equipment, tools, and materials Should be maintenance free as possible Using high-gloss paint will retard the accumulation of dust on the wall
9
Workbench Two types Penninsula Drop-leaf Recommended height for a workbench is 36” Using offset studs and insulation will reduce the amount of noise passing to other rooms
10
Garage Sizes Small Single 11’-0” x 19’-0” Large Single 13’-0” x 25’-0” Full Single 16’-0” x 25’-0” Small Double 20’-0” x 20’-0” Full Triple 35’’-0” x 25’-0” Full Double 25’-0” x 25’-0”
11
Closets 3 types Wardrobe Wall Walk-in Minimum closet depth is 24” Depths of more than 30” makes it difficult to reach the back of the closet
12
Materials for Closet Shelves Solid Lumber Plywood Hollow-core plywood Ventilated shelving (vinyl coated steel)
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.