1. WATER CLOSET TUTORIAL

2. New sketch on Top Plane 21” x 8” Extruded Boss/Base – 1” New sketch on surface (top of the base) Click Rebuild (traffic light) Click on top of the base (will turn blue)

3. Features tab Reference Geometry Plane Enter 6” for distance Confirm (green checkmark) New sketch on Plane Sketch an Ellipse 9.5 x 7 Click Rebuild (traffic light) Click on top of the base (will turn blue)

4. Reference Geometry - Plane Enter 8” for distance Confirm (green checkmark) Sketch an Ellipse 12 x 8.5 Rebuild (traffic light) Click on top of base Reference Geometry - Plane Enter 10” for distance Confirm (green checkmark) Sketch an Ellipse 15 x 10 Rebuild (traffic light) Click on top of base Reference Geometry - Plane Enter 10” for distance Confirm (green checkmark) Sketch an Ellipse 18 x 12 Rebuild (traffic light)

5. View Isometric Features Lofted Boss/Base When picking Pick near the front

6. New sketch on surface Sketch an Ellipse (18 x 12) Features Shell 1”

7. Offset 1” inwards Sketch a ledge for the tank Extrude Boss/Base 1” To hide layers Right-click Glasses (hide)

8. Fillet edges.35” New sketch on surface Extruded Boss/Base 13” Fillet edges.75” Toilet Tank sketch

9. Fillet surface.25” Toilet Seat Extruded Boss/Base 1” Fillet.5 radius