1. Making Roadways Safer for Motorcycles Awareness <> Suggestions <> Discussion

2. Motorcycle Awareness Topics 1.Operational differences between motorcycles and four-wheeled vehicles 2.Bumps, holes, cracks, and gravel 3.Lane ridges, rises and lane changes 4.Grooved surfaces and bridge deck surfaces 5.Joints on bridges, lanes, and RR crossings 6.Utility covers, grates, and steel plates 7.Painted pavement markings, RPMs, and signage 8.Combinations - work zone hazards

3. OPERATIONAL DIFFERENCES Segment 1

4. Segment 1. Operational Differences

5. 1. Operational Differences

6. 4 tires 2 tires

7. BUMPS, HOLES, CRACKS, AND GRAVEL Segment 2

8. Segment 2: Bumps, Holes, Cracks, and Gravel

9. 2. Bumps, Holes, Cracks, and Gravel

10. Suggestions and Discussion What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists? Bumps, Holes, Cracks, and Gravel

11. LANE RIDGES, RISES, AND LANE CHANGES Segment 3

12. Segment 3: Lane Ridges, Rises, and Lane Changes

13. 3. Lane Ridges, Rises, and Lane Changes Low Side High Side

14. Lane Ridges, Rises, and Lane Changes Edge Drop-Offs

15. Lane Ridges, Rises, and Lane Changes Suggestions and Discussion: What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists?

16. GROOVED SURFACES AND BRIDGE DECK SURFACES Segment 4

17. Segment 4. Grooved Surfaces and Bridge Deck Surfaces

18. 4. Grooved Surfaces and Bridge Deck Surfaces

19. Grooved Surfaces and Bridge Deck Surfaces

20. Suggestions and Discussion: What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists?

21. JOINTS ON BRIDGES, LANES AND RR CROSSINGS Segment 5

22. Segment 5. Joints on Bridges, Lanes and RR Crossings

23. 5. Joints on Bridges, Lanes and RR Crossings

24. Joints on Bridges, Lanes, and RR Crossings

25. Suggestions and Discussion: What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists? Joints on Bridges, Lanes, and RR Crossings

26. UTILITY COVERS, GRATES, AND STEEL PLATES Segment 6

27. Segment 6. Utility Covers, Grates, and Steel Plates

28. 6. Utility Covers, Grates, and Steel Plates

29. Utility Covers, Grates, and Steel Plates

30. Suggestions and Discussion: What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists?

31. PAINTED PAVEMENT MARKINGS, RPMS, AND SIGNAGE Segment 7

32. Segment 7. Painted Pavement Markings, RPMs, and Signage

33. 7. Painted Pavement Markings, RPMs, and Signage

34. Painted Pavement Markings, RPMs, and Signage Suggestions and Discussion: What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists?

35. COMBINATIONS – WORK ZONE HAZARDS Segment 8 DRAFT - Not for distribution

36. Segment 8. Combinations – Work Zone Hazards

37. 8. Combinations – Work Zone Hazards

38. Debris Grooves end

39. Combinations – Work Zone Hazards Suggestions and Discussion: What can be done during design to minimize these issues? What can be done during construction? What maintenance activities will minimize issues for motorcyclists?

40. Making Roadways Safer for Motorcycles - Conclusions Awareness <> Suggestions <> Discussion

41. Making Roadways Safer for Motorcycles This project was funded by the Florida Department of Transportation Produced by Seidler Productions and the Florida Technology Transfer Center