1. Ion Sources Some characteristics of ion sources (especially in high precision work): It should have high efficiency in generating ions of the element of interest (or a range of elements). All of the ions should have the same energy. It should produce an ion beam with low divergence. The ions should be the same charge (preferably +1 for positive ions or -1 for negative ions) so we separate by mass and not m/q. The ion beam should be stable. The ion beam should have isotopic ratios the same as the sample.

2. Thermal Ionization MS Advantages Advantages –Extremely Stable –Generally less prone to isotopic fractionation effects than other sources –Thermalized ions (narrow energy range) Disadvantages –Complicated sample preparation –Incomplete isotope (elemental) coverage »Inconsistent positive or negative ionization efficiencies across periodic table

3. Inductively Coupled Plasma MS Advantages Advantages –High sensitivity –Nearly complete isotope coverage –Liquid, solid or gas samples –Short analysis times –Less “art” Disadvantages –Isobaric interferences –Relatively noisy –Wide ion energy spread –Inefficient –Spectral complexity

4. So what is the ICP? What equipment does it require? What equipment does it require? How does it operate? How does it operate? What are its features? What are its features? How does it work with MS? How does it work with MS?

5. Basic ICP Instrument Sample Introduction System ICP Readout System Spectrometric System

6. Inductively Coupled Plasma - Atomic Emission Spectrometry (ICP-AES) Nebulizer Spray Chamber Torch99%

7. Types of ICP Nebulizers Concentric pneumatic Concentric pneumatic Cross-flow pneumatic Cross-flow pneumatic Ultrasonic (high sensitivity) Ultrasonic (high sensitivity) High-solids (V-groove, Babington, etc.) High-solids (V-groove, Babington, etc.) ….. …..

8. Types of ICP Spray Chambers Scott-type Scott-type High-efficiency High-efficiency Cyclonic Cyclonic Desolvating Desolvating ….. …..

9. The Inductively Coupled Plasma A plasma is a hot, partially ionized gas. A plasma is a hot, partially ionized gas. The ICP is an argon-based, radio frequency plasma. The ICP is an argon-based, radio frequency plasma. The input rf frequency is either 27 or 40 MHz at powers from 1 to 2 kW. The input rf frequency is either 27 or 40 MHz at powers from 1 to 2 kW. The plasma is formed and contained in a three tube quartz touch. The plasma is formed and contained in a three tube quartz touch. The temperature in the central analyte channel ranges from about 6000 to 8000° K. The temperature in the central analyte channel ranges from about 6000 to 8000° K. At these temperatures most elements are largely atomized and ionized At these temperatures most elements are largely atomized and ionized

10. The ICP Torch and Plasma

11. THE STEPS

13. ICP torch, nebulizer, spray chamber

14. Inductively Coupled Plasma (ICP) Tail Flame Induction (Load) Coil Normal Analytical Zone Sample Aerosol Y+Y+ Y YO e - + Ar  Ar + + 2e -

15. Inductively Coupled Plasma (ICP) Mass Spectrometer hν

16. Inductively Coupled Plasma - Mass Spectrometry

18. ICP-MS Interface Cones

22. Supersonic Expansion

23. Consequences of Expansion Small ions Ar Cs Li Large ions KE = 0.5 MV 2 So KE M + = kM +

24. Plasma Offset (Rectification) Mass Spectrometer + — e-e-

25. Plasma Offset (Rectification) Mass Spectrometer — Ar + +

26. Ion Energies Depend on Mass 27 MHz - open symbols 40 MHz - closed symbols o - “hot” plasma m - “cold” plasma

27. Ion Currents in ICP-MS

28. Spectral Characteristics of ICP-MS

29. ICP-MS Background: 5% HCl

30. ICP-MS Background: 5% H 2 SO 4

31. Oxide and Hydroxide Species

32. Variables Affecting Oxide Levels

33. Matrix Induced Signal Changes

34. Matrix Effects in ICP-MS

35. ICP-MS Options for Isotope Ratios Multi-collector sector-field spectrometer Multi-collector sector-field spectrometer –Offered by Thermo (Neptune), GV, and Nu –Isotope-ratio precision ~0.002% rsd (20 ppm) Time-of-flight mass spectrometer Time-of-flight mass spectrometer –Leco & GBC –Isotope-ratio precision ~0.05% rsd analog –Isotope-ratio precision ~0.01% rsd counting Array-detector sector field Array-detector sector field –Not yet commercially available –Isotope-ratio precision ~0.007% rsd

36. Thermo Neptune MC-ICP-MS

37. Nu Instruments MC-ICP-MS

38. Leco Renaissance ICP-TOFMS

39. GBC Optimass ICP-TOFMS