1. “GTP” Bypass & Filter Feeders Introduction, Sizes, Models and Trouble Shooting January 2007 Features & Options Model Numbering  Trouble Shooting  Contact Us  Introduction

2. Last  Home  BackNext   “GTP” Introduction GTP is your new source for:  Bypass & Filter Feeders  Glycol Feed Systems  Corrosion Coupon Racks  Poly and Steel Tanks  Tank Stands  High Speed Mixers and Custom Systems. “GTP” is proud to introduce the bypass feeder designed by customers, for customers. With durability, safety and industry in mind, we have designed this series feeder with an easy to remove Victaulic cap, laminated pressure vessel warning label and a standard 1/4” air release valve. Complete with mounting rack and stainless steel hardware, GTP Corrosion Coupon Racks are the choice of industrial professionals.

3. Last  Home  BackNext  Feeder Standard Features Features  1, 2 & 5 gallon dome or flat bottom models  300PSI @ 200F (all models)  Detachable leg assemblies  Filter “add-in-field” design  Tough oil-based enamel coating  Air release (all models)  Laminated pressure vessel warning label  2 year warranty

4. Last  Home  BackNext  Feeder Available Options Optional Features  Pleated filter assembly  Valve packages  Epoxy coating (inside and outside)  Pressure indicator  OEM versions available

5. Last  Home  BackNext  GTP Bypass & Filter Feeders Model Number: FB1/PF20 FB = Base Model “FB” is for the feeder style. Available options are “FB” for flat bottom and “DB” for dome bottom.

6. Last  Home  BackNext  GTP Bypass & Filter Feeders “1” is for the vessel size. Available sizes are 1, 2 & 5 gallon. Custom sizes and configurations are available upon request. 1 = Size FB = Base Model Model Number: FB1/PF20

7. Last  Home  BackNext  GTP Bypass & Filter Feeders FB = Base Model 1 = Size /PF20 = Optional Features “/PF20” is for optional features needed to complete installation. Filters, valve package and epoxy coatings can be added to ensure proper installation. See pricing for details Model Number: FB1/PF20

8. Last  Home  BackNext   Trouble Shooting  If you still need help, contact us.. If you are having problems, contact us at repairs@gtpcompany.com, or you can call us at the number on the front of the instruction manual.repairs@gtpcompany.comPROBLEM POSSIBLE CAUSE OR ACTION Leaking at closure (lid) Either lid and closure is not seated properly or the gasket has been attacked by high temperature or chemicals. Leaking at fittings Fittings may be cross threaded or fouled from debris. Filter damaged Check flow pattern, lowest fitting is to be inlet and the upper most fitting to be exit. Be sure that flow rate does not exceed volume turn over every minute

9. Last  Home  BackNext   Contact Us  Mailing Address: General Treatment Products P.O. Box 8697 Brea, CA 92822-5697 Phone: 714) 257-9165 FAX: 714) 257-9215 Internet: http://www.gtpcompany.com http://www.gtpcompany.com E-Mail: customerservice@gtpcompany.com customerservice@gtpcompany.com Shipping Address: General Treatment Products 254 Viking Ave. Brea, CA 92821