1. Direct Stress Isometric Drawings from TRIFLEX ® Windows Direct Stress Isometric Drawings from TRIFLEX ® Windows 1

2. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 2 Direct Stress Isometric from TRIFLEX ® Windows Any Output can be added to the Isometric: (Just a Few Shown Below) Piping System Geometry System Forces and Moments Restraint Forces and Moments Anchor Forces and Moments System Stresses Maximum System Value Piping System Movements

3. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 3 The Output Table can be selected:  Select from the available Output Reports  One by one  Check / UnCheck ALL

4. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 4 Using version 2.6.1 or greater Using TRIFLEX ® Windows version 2.6.1 or greater Make sure this view is the way you want to view it in a DXF file. Rotating while in a DXF file can cause the USER to be unable to view the Node Points and Dimensions.

5. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 5 Use the Pull Down menus Utilities, Export Files, 3D DXF

6. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 6 Save your DXF file with an appropriate name Name your DXF file.

7. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 7 Default Size for Report Data Font Size is 0.08 Default Size for Node Number Font Size is 0.125 Default Size for Node Dimension Font Size is 0.125 Now fill in the Dialog Box to request the Analysis Output to be on your Isometric

8. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 8 Report Font Size can be increased to Users needs. Selected ALL Reports OR the ones you want to save on the DXF file. Each Report will be placed in a different layer of your DXF file. Here I filled in the Dialog Box and requested All Outputs

9. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 9 TRIFLEX successfully Exported the Isometric View to a DXF file to open in AutoCAD

10. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 10 Now open AutoCAD or your DXF viewer. Now open AutoCAD or your DXF viewer. And pull up your DXF file you just saved.

11. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 11 After pulling up your file you may need to center the Isometric view in AutoCAD

12. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 12 Now you need to turn ON the layer in AutoCAD with the output you want to show on the Isometric Format, Layer Click the Light bulb in the ON column

13. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 13 Note how the new Isometric is shown along with the table of information you requested Your request was for the Restraint Forces and Moments

14. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 14 Full preview your Isometric. Here we are Plotting an 8-1/2” x 11” Plot.

15. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 15 Full preview your Isometric. Here we are Plotting an 11” x 17” Plot.

16. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 16 Default Size for Report Data Font Size is 0.08 We chose 0.24, creating a larger table for the Isometric. Default Size for Node Number Font Size is 0.125 Default Size for Node Dimension Font Size is 0.125 Selected ALL Reports You can then decide which Report you want by selecting the correct Layer in AutoCAD. Now some review on your settings. TRIFLEX ® Windows settings.

17. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 17 Variable You have successfully create an Isometric from and plotted the from TRIFLEX ® Windows and plotted the Isometric using AutoCAD. Congratulations!

18. www.pipingsolutions.com TRIFLEX ® Windows Direct Stress Isometric 18 For more details please contact: 6219 Brittmoore Road Houston, Texas 77041-5114 U.S.A. Voice: 713 849 3366 Fax: 713 849 3654 : info@pipingsolutions.com