1. VMF Detailed Design Version 3 by Yehuda Afek Alexander Matveev 5/11/2015VMF Dettailed Dezign ver21

2. Subjects  Abstract Idea  Transactional Memory:  Memory Model  Transaction  Illustration  Requirements:  VMF  Transactional Memory  Hardware Implementation:  Overview  VMF Prediction Table  Concept  Algorithm  VMF Stripe Cache  Concept  Algorithm  VMF Call Invoke Trigger  VMF Miss Prediction Handling  VMF Call Invoke implementation  TLB Modifications  VMF Code Segment: VMF_Start and VMF_End  Context Switch Handling 5/11/2015VMF Dettailed Dezign ver22

3. Abstract idea To automate the transactification process. Drastically simplify the compiler. The HW will automatically do the STM. It is like HW assisted STM 5/11/2015VMF Dettailed Dezign ver23

4. TM Memory Model Virtual memory pages are divided to stripes stripe can have an object inside or multiple objects. Also the objects can be splitted between the stripes. TM algorithm granularity will be stripe. Therefore, the read-set and write-set entries are stripes. TM algorithm is applied only for memory accesses to the shared memory. The user marks which memory pages are shared and which are not-shared. 5/11/2015VMF Dettailed Dezign ver24

5. TM Transaction Transaction is a block of code annotated by – {TxBegin, … block of code …, TxEnd}. Inside the transaction: – shared memory accesses: must be preceded by a TxLD or TxST function call. – non-shared memory accesses: proceed regularly TxLD or TxST: call will record the shared memory access (to read-set or write-set) and will perform the TM algorithm specific code. 5/11/2015VMF Dettailed Dezign ver25

6. .... Non-Shared Page stripe Virtual Memory CODE LD r, X1 ST Y, r LD r, X1+1 Transaction TM Illustration LD r, X2 Shared Page Non-Shared Page TxBegin TxEnd TxLD invoked TxST invoked no invokation Non-Shared Page 5/11/2015VMF Dettailed Dezign ver26

7. VMF Code Segment: block of code annotated as: – {VMF_Start, … block of code …, VMF_End) – VMF_Start and VMF_End are defined in next slides VMF Invocation Trigger: For VMF code segment, VMF Call is invoked for LD or ST instruction if all the following conditions are true: 1.memory access address page is marked as shared 2.If LD: memory access address stripe was not accessed before for LD (After the VMF_Start call) 3.If ST: memory access address stripe was not accessed before for ST (After the VMF_Start call) VMF Call Invoke: If LD/ST instruction invoked VMF then the order of execution is: 1.VMF function (given the read/write memory address) 2.The original LD/ST instruction VMF - Requirements 5/11/2015VMF Dettailed Dezign ver27

8. VMF Call = TxLD/TxST for LD/ST instruction VMF Code Segment is: – START = TxBegin – END = TxEnd TxBegin: 1.Execute VMF_Start (Defined in next slides) 2.Execute the TM_Start TxEnd: 1.Execute the TM_Commit using the constructed READ-SET and WRITE-SET. 2.Execute VMF_End (Defined in next slides) TM - Requirements 5/11/2015VMF Dettailed Dezign ver28

9. Hardware Implementation Overview VMF Call Invoke will be done once per read or write access to every stripe during the transaction. In order to support this the following changes will done to the pipeline: – Fetch Stage: VMF Prediction Table (VMF PT) will be used to predict VMF Call Invoke based on previous results for current LD/ST instruction. – MEM Stage: VMF Stripe Cache (VMF SC) will be used to cache stripes that have been already accessed. New Registers: Upon VMF Call we want to store: – VMF_ADDR_REG: The memory address accessed by the LD/ST instruction that invoked the VMF – VMF_PC_REG: The PC of the current LD/ST instruction so we can return back New Instructions: – VMF_Start opcode – VMF_End opcode 5/11/2015VMF Dettailed Dezign ver29

10. 5/11/2015VMF Dettailed Dezign ver210 TLB PC Reg Addr Reg inst addrvmfF Inst PC Access Addr VMF Ctrl VMF PT SC

11. CONCEPT: We distinguish between three types of instruction occurrences which access shared data: Multiple Invoke: Instruction that access a different stripe in each occurrence of the instruction in a transaction. Once Invoke: Instruction accessing the same stripe throughout a transaction. First Time: Repeated: Instruction accessing the same stripe during the transaction AND it is accessing a stripe that was accessed before by some LD/ST instruction during THE SAME transaction. – Table entry is: ( instruction address, flags ) can be squeezed into 32 bits. (The last 2 bits of 32 bit instruction address can be used). – Flags (2 bit): 0: Once invoke type (Not yet invoked) 1: Once invoke type (Repeated) 2: Multiple invoke type (Not invoked yet) 3: Multiple invoke type (Already invoked) VMF Prediction Table Concept 5/11/2015VMF Dettailed Dezign ver211

12. VMF Prediction Table Algorithm 1.COMMON CASE: If instruction triggered VMF Call and VMF Call was predicted: – If instruction’s entry flags == 0 (Once Invoke – Not invoked yet) then – Update the instruction’s entry flags to 1 (Once Invoke – Already invoked) – Else if instruction’s entry flags == 2 (Multiple Invoke – Not invoked yet) then – Update the instruction’s entry flags to 3 (Multiple Invoke – Already invoked) – Else, – The instruction’s entry flags is 3 (Multiple Invoke – Already invoked). Do no changes to the entry. 1.STUDY CASE - Once Invoke: If instruction triggered VMF Call and VMF call was not predicted: – Create entry with ( current instruction address, flags = 1 ) 1.STUDY CASE – Multiple Invoke: If instruction triggered VMF Call and VMF call was not predicted because flags == 1 for the entry: – Set entry’s flags to 3 (Multiple Invoke – Already invoked ) 1.RESTUDY CASE – NOT COMMON: If instruction did not triggered VMF Call and VMF call was predicted: – Remove instruction’s entry 5/11/2015VMF Dettailed Dezign ver212

13. VMF Stripe Cache CONCEPT: The purpose of the VMF Stripe Cache is to record the stripes that were already accessed in the current transaction. ALGORITHM: – Every entry has: ( stripe address, flags) – Flags can be: 0 – read access was performed 1 – write access was performed – If shared memory access triggers VMF Call Invoke and the VMF PT flags is not equal to 3 (Multiple Invoke – Already Called) then: Entry is created in the table holding the stripe’s address and the access type information (0 for LD, 1 for ST) 5/11/2015VMF Dettailed Dezign ver213

14. VMF Call Invoke Trigger VMF Call Invoke Trigger: VMF Call Invoke is triggered if all following conditions are met for current LD/ST instruction: 1.Memory access address page is marked as shared 2.Memory access address stripe entry = (stripe address, flags = 0 for LD or 1 for ST) is not in VMF Stripe Cache Updates Upon Trigger: If VMF Call Invoke Trigger is True then: – VMF Stripe Cache is updated: new entry is added – VMF Prediction Table is updated: new entry is added, or entry’s flags is switched from 0 to 1 or from 1 to 2 or from 2 to 3. 5/11/2015VMF Dettailed Dezign ver214

15. VMF Miss Prediction Handling If current LD/ST instruction triggers VMF Call Invoke and VMF PT did not predict it then: 1.Store current LD/ST instruction: Memory access address (to special register) Instruction PC (to special register) 2.Flush the pipeline 3.Restart execution at PC = VMF Call Base Address 5/11/2015VMF Dettailed Dezign ver215

16. VMF Call Invoke Hardware Implementation In order to invoke the VMF Call we need to pass parameters to it. The basic parameters are current instruction’s: Memory access address Instruction PC – Therefore upon VMF Call Invoke Trigger: – Memory access address is forwarded to the VMF_ADDR_REG – Instruction PC is forwarded to the VMF_PC_REG – Current LD/ST instruction is aborted – (If was VMF miss prediction then pipeline flush is performed) – VMF Call Procedure is executed normally 5/11/2015VMF Dettailed Dezign ver216

17. Every page has additional bit – 0 – not marked (not shared) – 1 – marked (shared) page addrOption FlagsS Flag TLB Modifications 5/11/2015VMF Dettailed Dezign ver217

18. VMF_Start: – VMF PT: If entry’s flag is 1 then reset it to 0 If entry’s flag is 3 then reset it to 2 – VMF SC (Stripe Cache): remove entries – Trigger VMF on VMF_End: – Trigger VMF off VMF Code Segment 5/11/2015VMF Dettailed Dezign ver218

19. Context Switch Upon context switch: – Flush the VMF tables (to preserve correctness) 5/11/2015VMF Detailed Design ver319