1. Networking Essentials Chapter 10 Fall, 2012

3. IGPs are used… EGPs are used…

7.  Measure of …  Ranges from ____ to ____  Router compares ADs from two or more routes. The one with the ________ AD wins.  If there is a tie, then the router uses ______ __________ to test for the best link.

8.  Directly connected –  Static route -  EIGRP -  IGRP -  OSPF –  RIP –  External EIGRP -  Unknown –

9.  Distance Vector – finds best routing by …  Link state – finds best route by …  Hybrid – there’s only one and it’s special!

10.  “routing by rumor”  Use ______ to determine best route  When tables are complete, they are said to be…

11.  Is a _____________ protocol  Non-proprietary, which means…  Sends out updates every ______ seconds  Maximum hop count of _______  RIPv1 uses classful routing, meaning…  RIPv2 uses classless routing, meaning…

14.  _________

15.  Is proprietary to _________  Classless or classful?  Neighbor table…  Topology table…  Feasible successor…  Successor…

16.  Uses _______ to determine best route  Packet updates are sent using ______

17.  Two examples - _________ and ________  Two tables- routing table and topology table  LSAs –

18.  No routing updates (why?)  Supports VLSM  Unlimited hop count  Non-proprietary

19.  Link state  Good for internal organization, not between organizations  Only difference between OSPF and IS-IS is…

20.  RIPng –  Now uses UDP port ____  EIGRPv6 –  OSPFv3