Presentation is loading. Please wait.

Presentation is loading. Please wait.

LPG/LNG cargo handling

Published byBrianne Banks Modified over 9 years ago

Similar presentations

Presentation on theme: "LPG/LNG cargo handling"— Presentation transcript:

1 LPG/LNG cargo handling
Inerting (izlaz iz doka) Gassing-up Cooling-down (tanks) Loading Refrigiration (for LPG Carriers) Discharging Inerting (if changing cargo or aerating) (ulaz u d.) Aerating (degazation)

2 Inerting By displacement method
low speed of inert gas abt. 4 changing of tank volume entering of IG on top or bottom of tank (depending of specific density) By mixing of inert gas and gas residues high speed of IG entering (mixing)

3 Inerting by displacement method
VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Inerting by displacement method

4 Inerting of cargo tanks by ship's plant
VAPOUR HEADER LIQUID HEADER VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower liquid vapour Inerting of cargo tanks by ship's plant

5 Gassing-up For passing fm.inerted to loaded condition
Inert gas has uncondensable gases (Nitrogen and CO2 can not be condensed by ship’s reliquefaction plant) problem w. reliquifaction plant (condenser) Venting to atmosphere or return to shore until tank is full with next cargo vapour

6 Gassing-up Gassing-up at sea (available to fully or semi-pressurised ships) – often with deck tanks Gassing-up using cargo from shore Before commencing gasing-up O2 contents must be less then 5% for LPG-s, and for some terminals less than 0.5%, or even less – for Vinyl Cloride

7 Gassing-up Compressors for reliquefaction can be started after gas concentration into tank reach at least 90%

8 Gassing-up cargo tanks using liquid fm. shore
CONDENSATE RETURN LINE VENT HEADER INERT GAS HEADER LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Gassing-up cargo tanks using liquid fm. shore

9 Gassing-up cargo tanks using vapour fm. shore
VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Gassing-up cargo tanks using vapour fm. shore

10 Cooling-down For preventing excesive pressure during loading or transporting Spraying cargo liquid into a tank at a slow rate – evaporation/expansion Cooling-down rate depends of the tanks design and size – abt. 10oC per hour Inert gas – cargo vapour mixture goes to vent riser (atmosphere) or reliquefaction plant (problem with noncondensable gases – constant condenser venting)

11 Cooling-down Cargo tank cooling-down reduces temperature into hold space or interbarrier spaces – pressure drop Pressure drop into interbarrier or hold space should be compensated with inert gas or dry air During coolin-down water (moisture) or remain inert gas could couse big problems (pumps, valves and other equipment could stuck up)

12 Cool-down using liquid from shore: vapour returned to shore
LIQUID HEADER VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Cool-down using liquid from shore: vapour returned to shore

13 Loading the cargo before
Ship / shore preloading plan Cargo characteristics, inhibitors and inert gas to be used Before loading attention to be paid: safety valves settings and h.p. alarm settings remotely operated valves reliquefaction equipment gas detection system alarms and controls ESD (Emergency Shut Down)

14 Loading Vapourisation control (LPG ships):
vapour return line connected to gas compressor reliquefaction plant – liquid return to tanks combination of above Vapourisation control (LNG ships): return to shore is normal procedure (no reliq. plant) return by ship’s compressors or compressors from shore – max. loading rate limitation

15 Loading with vapur return to shore
VAPOUR HEADER LIQUID HEADER VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower liquid vapour Loading with vapur return to shore

16 Loading without vapour return
VAPOUR HEADER LIQUID HEADER VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower liquid vapour Loading without vapour return

17 Loading fully refrigirated ships
Usually from fully refrigirated storage (jetty) Long distance btw. shore storage and ship and high ambient temperature can couse tank pressure remaining problem, specially in early stages; loading rate must be reduced to give a time reliq. plant for cooling down cargo tank loading limited quantities of liquid into the tank via the top sprays – helping condensate some cargo

18 Loading pressurised ships
Arriving at a loading terminal at atmospheric pressure Need vapour from shore to purge remaining nitrogen or contaminants from tanks – equalise pressures btw. ship and terminal Tank and pipeline temperature must not fall bellow design temperature – slow rate at the beginning

19 Loading pressurised ships from refrigirated storage
Tanks suitable for min. temperature btw. 0 and –5oC Cargo should be heated (pumping through cargo heater on board or shore) Attention to be paid for topping of (max. 98% at max. temperature reached during the voyage)

20 Loading semi-pressurised ships from refrigirated storage
Cargo tanks constructed of low temperature steels – able to accomodate fully refrigirated propan (-40 and –50oC) or for ethylene -104oC Refrigirated cargo can be loaded without heating Cargo temperature can be maintained during loaded voyage by reliq. plant – if discharged to refrigirated storage Cargo can be heated during loaded voyage if discharged into pressurised facilities

21 Cargo refrigiration at sea
VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Cargo refrigiration at sea

22 Cargo refrigiration at sea
By reliquefaction plant Compressor should not be run during heavy rolling Condensate is passed through the top sprayes – cooling down the liquid surface (the bulk of the liquid has not been cooled) To cool down bulk of the liquid condensate return should be through the bottom connection of the tank to ensure proper circulation

23 Cargo refrigiration at sea
Reliquefaction plant run on more than one tank simultaneosly – carefully controled condensate return (to avoid overfilling of any one tank)

24 Discharge without vapour return
VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Discharge without vapour return

25 Discharging Method depends on type of ship, cargo specification and terminal storage; Discharge by pressurising the vapour space shore vapor suply or vaporiser and compressor on board Discharge with or without booster pumps discharging limited by pipeline diametar booster pump – for long distances or higher levels Discharge via booster pump and cargo heater when discharged from refrigirated ship to pressurised terminals

26 Discharge with vapour return
VENT HEADER INERT GAS HEADER CONDENSATE RETURN LINE LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER liquid vapour Discharge with vapour return

27 After discharge Draining tanks and pipelines
Pump discharge valve should not be throtteled for flow control if the pump is operating with a booster pump (can damage pump) Cargo must be drained from all deck lines and cargo hoses or hard arms – by compressor (from ship to shore) or by blowing the liquid into ship’s tanks using nitrogen injected at the base or apex of the hard arm Only after depressuring all deck lines and purging with nitrogen ship/shore connection can be broken

28 Aeration of cargo tanks
liquid vapour CONDENSATE RETURN LINE VENT HEADER INERT GAS HEADER LIQUID HEADER Reliquefaction Vapour Compressor L.P.G. Vaporizer Inert Gas Generator Heater Air Blower VAPOUR HEADER Aeration of cargo tanks

29 Ballast voyage Small quantity of cargo retain on bord (heel)
only if the same grade of cargo will be loaded For large LNG carriers 2000 to 3000 m3 may be retained in the tanks – fitted with spray cool-down pumps in each cargo tank to minimise tank thermal gradients On LPG-s small amount of liquid remaining to provide necessary cooling during ballast voyage – by using reliquefaction plant

30 Amonia – special procedures
When changing from amonia to LPG most traces of vapours must be removed (remaining volume quantity - 20ppm) Amonia – when evaporating to air is particulary likely to reach super-cooled condition – all liquid must be removed For amonia the inert gas plant must not be used as the ship’s inert gas plant is not suitable – carbamate formation Blowing warm fresh air into system – disperzing amonia vapour Sometimes washing with fresh water (amonia is highly water soluble) – not suitable for prismatic tanks (for tanks with minimum internal structure - full drainage, clean and rust free tanks)

31 Amonia – special procedures
All traces of water must be removed (preventing formation of ice or hydrats) – fixed or portable pumps High solubility of amonia in water (300:1) can lead to dangerous vacum condition in tank – to ensure essential air entry into the tank during water washing proces – air dew point must be lower than the tank atmosphere

32

33

34

35

36

37 Cargo compatibilities

38

Download ppt "LPG/LNG cargo handling"

Similar presentations

Basic Refrigeration, Its Components, and Its Cycle

Basic Refrigeration, Its Components, and Its Cycle
Pneumatic Principles.

Pneumatic Principles.
Truck-Trailer Refrigeration Equipment

Truck-Trailer Refrigeration Equipment
LNG Prigorodnoye Overview

LNG Prigorodnoye Overview
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.

Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
HEATING AIR © Commonwealth of Australia 2010 | Licensed under AEShareNet Share and Return licence.

HEATING AIR © Commonwealth of Australia 2010 | Licensed under AEShareNet Share and Return licence.
Basic Refrigeration Cycle

Basic Refrigeration Cycle
Tehnologija transporta tekućih tereta Liquid Cargo Handling Technology Sem: V (Year: 3rd) Literature http://www.pfri.uniri.hr/~bernecic/ ISGOTT – International.

Tehnologija transporta tekućih tereta Liquid Cargo Handling Technology Sem: V (Year: 3rd) Literature ISGOTT – International.
Refrigeration Flow Control

Refrigeration Flow Control
Thermal Power Station Plant. Introduction 150 MW Thermal power station plant, produce 450t/hr steam at full load The max steam pressure is 150 bar with.

Thermal Power Station Plant. Introduction 150 MW Thermal power station plant, produce 450t/hr steam at full load The max steam pressure is 150 bar with.
9. Storage Tanks.

9. Storage Tanks.
Cooling As working temperatures rise, the strength of metals used reduces. This in turn will force manufacturers to use superior metals/alloys, which can.

Cooling As working temperatures rise, the strength of metals used reduces. This in turn will force manufacturers to use superior metals/alloys, which can.
Reefer Cargo Brine Circulation systems

Reefer Cargo Brine Circulation systems
“RESERVOIR ENGINEERING”

“RESERVOIR ENGINEERING”
PROPERTIES OF FLAMMABLE MATERIALS. Flammability Flammable Flammable –Capable of being ignited and of burning –Synonymous with combustible.

PROPERTIES OF FLAMMABLE MATERIALS. Flammability Flammable Flammable –Capable of being ignited and of burning –Synonymous with combustible.
Gas – Vapor Mixtures & Air – Conditioning

Gas – Vapor Mixtures & Air – Conditioning
LIQUEFIED NATURAL GAS CARRIER (LNG)

LIQUEFIED NATURAL GAS CARRIER (LNG)
Drug Delivery & Tissue Engineering Laboratory

Drug Delivery & Tissue Engineering Laboratory
Steam Power Plant.

Steam Power Plant.
Weather Water in the Atmosphere May 14, 2008. Precipitation Precipitation is any form of water that falls from a cloud. Water vapor is the source of all.

Weather Water in the Atmosphere May 14, Precipitation Precipitation is any form of water that falls from a cloud. Water vapor is the source of all.

Similar presentations

Ads by Google