1. technical data Thermodul 320 - PLC Production machine for the following formwork elements: T-16, T-20, T-30 and TN-16, TN-20, TN-28 Weight: 1200 kg Working surface: 1200 x 3400 mm Working height: 60 x 250 mm Electricity supply: 400 V or 32 A Cutting wire: 16 pieces á 0,4 mm Drilling unit: 96 pieces of KA 18-50 knives Cutting time: 1 min. 30 sec. for one Polystyrene board á 1200 x 3000 mm Productivity: About 40 m² wall elements (24 polystyrene boards) in an hour. More than 300 m² ( 190 polystyrene boards) per day. A 10m x 11m house needs about 150 m² wall elements. This machine is able to produce at least 2 houses/day in about 8-9 hours. Warranty: 1 year Transport: Easily transportable on a trailer for on-site production. The Thermodul 320 is a PLC navigated polystyrene processing maschine on a solid steal construction. All moveable working surfaces are made of aluminum profile, very robust but light at the same time. A small compressor provides the needed blast. The energy efficient PLC control will only switch on the heatingwire during machining time. Programming: All current wall elements are preassigned by the factory. Pre-pgrogramming via the PLC control’s touch screen is easy to optimize or to code a new element. The automated program will run smoothly without any manual intervention. THERMODUL SYSTEM GmbH Raiffeisenallee 12a 82041 Oberhaching Germany Tel. +49 (0) 89 450 815 55 Fax. +49 (0) 89 450 815 50 E-Mail: info@thermodulsystem.de www.thermodulsystem.com

2. technical data Thermodul TD6 - PC Production machine for THERMODUL ceiling elements, round elements and decor elements Weight: 1500kg Dimensions: 3200 x 3000 x 1700mm Working surface: 1000 x 1200 x 2000mm Power socket: 400 V or 32 A Cutting wire: up to 12pcs a 2200mm Cutting resolution: 0,60mm Maximum speed: 1200mm/min. Cutting speed: 0-500mm/min. Electricity supply: 220V three phase, 50-60Hz, 16A Axes: 2 Motor type: OMRON AC servo motor (1 x 750W, 2 x 200W), Software: Mack 2 oder Mack 3 Operating System: Windows 97 Warranty: 1 year The Thermodul TD6 is a PC navigated polystyrene cutting machine with an oscillation module built on a steal construction. This machine is capable of cutting arched wall elements or any kind of 2D forms generated by a computer. 10 heat wires make it possible to carry out different workflows at the same time. Tel. +49 (0) 89 450 815 55 Fax. +49 (0) 89 450 815 50 E-Mail: info@thermodulsystem.de www.thermodulsystem.com THERMODUL SYSTEM GmbH Raiffeisenallee 12a 82041 Oberhaching Germany

3. technical data Thermodul TDM 160 Dimensions: 2500 x 800 x 1500mm Working Surface: 3250 x 1200 x 250 mm Cutting wire: 8pcs / KA18-50 knives Maximum speed: 200 mm/min. Electricity supply: 400V three phase, 50-60 Hz, 14 A Maximum radius: 1000 mm Maximum cutting height: 300 mm Warranty: 1 year The Thermodul TDM 160 is a cutting machine for semi circular arches built on a solid steal construction. This machine is operated manually. Tel. +49 (0) 89 450 815 55 Fax. +49 (0) 89 450 815 50 E-Mail: info@thermodulsystem.de www.thermodulsystem.com Production machine for arches THERMODUL SYSTEM GmbH Raiffeisenallee 12a 82041 Oberhaching Germany